Examples Analysis of Ultrasonic Detection of Titanium Alloy Materials
摘 要
通过超声检测对钛合金材料内部的可疑缺陷进行定位,采用低倍检验、高倍检验以及微区化学成分能谱分析等方法对缺陷部位进行分析,并将分析结果与超声检测结果进行比较。结果表明:超声检测技术能够有效检测发现钛合金材料内部的夹杂、孔洞、过热组织(局部组织粗大、组织不均匀)等缺陷,而对于低倍检验中发现的局部化学成分偏析类缺陷则不能有效检测出,同时异常的内部组织也会影响到超声检测的正常判别。
Abstract
The suspicious defects in titanium alloy materials were located by ultrasonic detection. The defects were analyzed by means of low magnification test, high magnification test and energy spectrum analysis of micro-area chemical composition. The results were compared with those of ultrasonic detection. The results show that the ultrasonic detection technology could effectively detected the inclusions, holes, superheat structure (local coarse, uneven structure) and other defects in the titanium alloy materials. However, the local chemical segregation defects found in the low magnification test could not be effectively detected by ultrasonic detection, and the abnormal internal structure will also affect the normal discrimination of ultrasonic detection.
中图分类号 TG146.2+3 DOI 10.11973/lhjy-wl201907009
所属栏目 实践经验
基金项目
收稿日期 2018/11/12
修改稿日期
网络出版日期
作者单位点击查看
备注张利军(1981-),男,高级工程师,主要从事钛合金等稀有金属材料熔炼及热加工成型技术工作,hchy9999@126.com
引用该论文: ZHANG Lijun,HE Chunyan,ZHANG Chenhui,GUO Kai,DU Bosheng. Examples Analysis of Ultrasonic Detection of Titanium Alloy Materials[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2019, 55(7): 468~473
张利军,何春艳,张晨辉,郭凯,杜博生. 钛合金材料超声检测实例分析[J]. 理化检验-物理分册, 2019, 55(7): 468~473
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王金友,葛志明,周彦邦. 航空用钛合金[M]. 上海:上海科学技术出版社,1985.
【2】《中国航空材料手册》编辑委员会. 中国航空材料手册[M]. 北京:中国标准出版社,2002.
【3】《超声波探伤技术及探伤仪》编写组. 超声波探伤技术及探伤仪[M]. 北京:国防工业出版社,1977.
【4】全国锅炉压力容器无损检测人员考核委员会. 超声检测[M]. 北京:中国锅炉压力容器安全杂志社,1995.
【5】何春艳,朱康平,文宁. TC1钛合金棒材超声检测过程未超标异常波的分析[J]. 钛工业进展,2009,26(5):38-40.
【6】邹宇超,国玉军,关福安. α钛合金锻材组织的缺陷分析[J]. 理化检验(物理分册),1994,30(1):47-49.
【2】《中国航空材料手册》编辑委员会. 中国航空材料手册[M]. 北京:中国标准出版社,2002.
【3】《超声波探伤技术及探伤仪》编写组. 超声波探伤技术及探伤仪[M]. 北京:国防工业出版社,1977.
【4】全国锅炉压力容器无损检测人员考核委员会. 超声检测[M]. 北京:中国锅炉压力容器安全杂志社,1995.
【5】何春艳,朱康平,文宁. TC1钛合金棒材超声检测过程未超标异常波的分析[J]. 钛工业进展,2009,26(5):38-40.
【6】邹宇超,国玉军,关福安. α钛合金锻材组织的缺陷分析[J]. 理化检验(物理分册),1994,30(1):47-49.
相关信息