搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
一种基于均匀稀疏采样的Lamb波场重构方法
          
A Lamb Wavefield Recovery Method Based on Uniform Sparse Sampling

摘    要
为了提高研究区域内Lamb波场的获取效率,提出了一种均匀稀疏采样策略,结合压缩感知理论,通过扫描式激光多普勒测振仪拾取的少量测点信号重构出待测波场,并对含人工损伤的铝板进行了试验验证。结果表明:提出的方法可在空间上将测点数减少至传统Nyquist采样点数的90%以上,并得到与原始波场相干性较高的重构波场,同时实现对结构损伤的定位和成像;研究结果可极大地提高基于波场分析的损伤检测技术的执行效率。
标    签 无损检测   Lamb波   扫描式激光多普勒测振仪   波场重构   nondestructive test   Lamb wave   scanning laser Doppler vibrometer   wavefield recovery  
 
Abstract
A uniform sparse sampling strategy is proposed to improve the acquisition efficiency of the Lamb wavefield of the ROI. The proposed method can recover the guided wavefield of the ROI from a small number of measured signals picked up by the scanning laser Doppler vibrometer using the compressive sensing theory. The experiment is carried out in an aluminum plate with an artificial damage to verify the recovered quality of this method. The experimental results show that the proposed method can reduce the number of measuring points by more than 90% of the traditional Nyquist sampling points in space, and obtain the recovered wavefield with a high coherence coefficient with the original wavefield, and the same time it can realize the positioning and imaging of the structural damage. The research results can greatly improve the efficiency of the damage detection technologies based on the Lamb wavefield analysis.

中图分类号 TG115.28   DOI 10.11973/wsjc201909007

 
  中国光学期刊网论文下载说明


所属栏目 无损检测新技术发展与应用专题

基金项目 国家自然科学重点国际合作项目(11520101001);江苏省研究生培养创新工程项目(KYCX17_1756)

收稿日期 2019/3/11

修改稿日期

网络出版日期

作者单位点击查看


备注骆英(1960-),男,博士,教授,主要从事新型无损检测技术及传感器机理研究方面的工作

引用该论文: LUO Ying,ZHOU Yang,LI Pengfei,XU Chenguang. A Lamb Wavefield Recovery Method Based on Uniform Sparse Sampling[J]. Nondestructive Testing, 2019, 41(9): 28~32
骆英,周杨,李鹏飞,徐晨光. 一种基于均匀稀疏采样的Lamb波场重构方法[J]. 无损检测, 2019, 41(9): 28~32


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】刘增华, 冯雪健, 陈洪磊, 等. 基于波数分析的激光Lamb波缺陷检测试验研究[J]. 机械工程学报, 2018, 54(18):23-32.
 
【2】LEMISTRE M, BALAGEAS D. Structural health monitoring system based on diffracted Lamb wave analysis by multiresolution processing[J]. Smart Materials and Structures, 2001, 10(3):504-511.
 
【3】SIKDAR S, BANERJEE S, ASHISH G. Ultrasonic guided wave propagation and disbond identification in a honeycomb composite sandwich structure using bonded piezoelectric wafer transducers[J]. Journal of Intelligent Material Systems and Structures, 2016, 27(13):1767-1779.
 
【4】CASTELLINI P, ESPOSITO E, MARCHETTI B, et al. New applications of Scanning Laser Doppler Vibrometry (SLDV) to non-destructive diagnostics of artworks:mosaics, ceramics, inlaid wood and easel painting[J]. Journal of Cultural Heritage, 2003, 4:321-329.
 
【5】ZHOU Z, SUN G, BAOQUAN M A, et al. Application of new developed techniques for ultrasonic nondestructive testing for advanced composite materials[J]. Science & Technology Review, 2014, 32(9):15-20.
 
【6】SOHN H, DUTTA D, YANG Y, et al. Automated detection of delamination and disbond from wavefield images obtained using a scanning laser vibrometer[J]. Smart Materials and Structures, 2011, 20(4):045017.
 
【7】DONOHO D L. Compressed sensing[J]. IEEE Transactions on Information Theory, 2006, 52(4):1289-1306.
 
【8】ESFANDABADI Y K, MARCHI L D, TESTONI N, et al. Full wavefield analysis and damage imaging through compressive sensing in lamb wave inspections[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2018, 65(2):269-280.
 
【9】IANNI T D, DE M L, PERELLI A, et al. Compressive sensing of full wave field data for structural health monitoring applications[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2015, 62(7):1373-1383.
 
【10】MESNIL O, RUZZENE M. Sparse wavefield reconstruction and source detection using Compressed Sensing[J]. Ultrasonics, 2016, 67:94-104.
 
【11】DONOHO D L. Compressed sensing[J]. IEEE Transactions on Information Theory, 2006, 52(4):1289-1306.
 
【12】ROSE J L, NAGY P B. Ultrasonic waves in solid media[J]. The Journal of the Acoustical Society of America, 2000, 107(4):1807-1808.
 
相关信息
   标题 相关频次
 基于超声Lamb波的双曲线定位损伤成像方法
 4
 改进的希尔伯特-黄变换(HHT)在多模式Lamb波检测中的应用
 3
 基于概率损伤算法的铝板电磁超声Lamb波扫描成像
 3
 隧道锚杆锚固质量的无损检测技术
 3
 探地雷达在公路路基路面检测中的应用
 3
 “中温环境”环氧树脂固化过程的Lamb波实时监测
 2
 16MnR钢板低温冲击过程的声信号特性
 2
 20CrMnTi钢齿轮锻件表面缺陷产生原因
 2
 20MnCr5钢齿轮轴渗碳淬火后表面缺陷原因分析
 2
 AFA 3G破损燃料棒的超声检测
 2
 GCr15棒材热剪切开裂原因
 2
 GCr15钢轴承套圈内表面开裂原因
 2
 H13钢模块横向冲击功不合格原因
 2
 Lamb波损伤散射及损伤成像的模拟
 2
 ZKG223钎杆连接套管断裂原因分析
 2
 板中Lamb波与管中纵向模态的传播特性的对比分析
 2
 变厚度板中Lamb波传播的模态转换特性
 2
 变径管周向导波Lamb波传播特性
 2
 薄板结构中Lamb波的检测与仿真
 2
 大型H型钢气割裂纹原因分析
 2
 多层板缺陷的超声Lamb波检测
 2
 风机叶片结构的Lamb波损伤成像监测
 2
 氟化改性对N80钢耐腐蚀和防垢性能的影响
 2
 复旦大学团队实现有机材料的高激发态发光转换调控
 2
 复合材料Lamb波检测中S0单模式信号的提取
 2
 复合材料Lamb波时间反转检测方法研究现状
 2
 复合材料盒段冲击损伤的成像优化
 2
 钢/橡胶胶接结构中脱粘缺陷的Lamb波定量检测
 2
 钢轨损伤的无线传感网络监测系统
 2
 国内某大型炼油企业常压塔顶腐蚀分析及控制建议
 2