The ultrasonic imaging inspection for butt welding of steel containment vessel
摘 要
核电站反应堆钢制安全壳是防止反应堆放射性物质进入外界环境的最后一道屏障,对核电站的安全运行至关重要。主要介绍了在不去除焊缝表面余高的情况下,相控阵(PAUT)和衍射时差法(TOFD)超声检测技术在钢制安全壳对接焊缝中的检测应用。通过在埋藏有一定数量的典型焊接缺陷的模拟试块上的试验表明:相控阵和衍射时差法超声检测技术对焊接缺陷具有较高的检出率和较强的缺陷定位、定量的能力,是一种可靠、高效及经济的检测手段。
Abstract
The steel containment shell of nuclear power plant is the last barrier to prevent radioactive material from entering the exotic environment. It is very important for the safe operation of nuclear power plant. This paper mainly introduces the application of PAUT and TOFD ultrasonic testing technology to the detection of butt welds of steel containment shells with the weld reinforcement. The experimental research on the simulated test block with a certain number of typical welding defects has proven that the detection of welding defects by PAUT and TOFD ultrasonic testing shows a high detection rate, strong localization and quantitative ability. It is a reliable, efficient and economical means of inspection.
中图分类号 TG115.28 DOI 10.11973/wsjc201910001
所属栏目 试验研究
基金项目 国家科技重大专项项目(2017ZX06002007)
收稿日期 2019/5/8
修改稿日期
网络出版日期
作者单位点击查看
备注肖爱武(1988-),男,本科,工程师,从事无损检测工程技术应用、新技术研发等
引用该论文: XIAO Aiwu,SHI Huan,ZHANG Le,MA Zhongli. The ultrasonic imaging inspection for butt welding of steel containment vessel[J]. Nondestructive Testing, 2019, 41(10): 1~5
肖爱武,石欢,张乐,马中利. 钢制安全壳对接焊缝的超声波成像检测[J]. 无损检测, 2019, 41(10): 1~5
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】唐识,张俊宝,朱跃德,等.核电站钢制全壳SA738Gr.B的焊接工艺[J].电焊机,2016,46(7):72-78.
【2】唐识,刘非,胡庆睿.核电站钢制安全壳SA738Gr.B钢焊缝裂纹产生原因分析及预防[J].焊接,2017(8):55-60.
【3】刘恩凯,马占云,王忠旭,等.使用相控阵检测技术代替射线检测核电设备钢制安全壳对接焊缝的可行性[J].无损检测,2017,39(4):72-74.
【2】唐识,刘非,胡庆睿.核电站钢制安全壳SA738Gr.B钢焊缝裂纹产生原因分析及预防[J].焊接,2017(8):55-60.
【3】刘恩凯,马占云,王忠旭,等.使用相控阵检测技术代替射线检测核电设备钢制安全壳对接焊缝的可行性[J].无损检测,2017,39(4):72-74.
相关信息