油气田环境中不锈钢点蚀研究现状
Research Status of Pitting Corrosion of Stainless Steel in Oil and Gas Field Environment
摘 要
不锈钢因其具有优良的耐蚀性被大量应用于油气田环境中。但是，在复杂的油气田环境中不锈钢仍旧会发生点蚀。为了保证不锈钢能够安全服役，从不锈钢材料的点蚀机制、点蚀影响因素等方面综述了不锈钢在油气田环境中的点蚀研究现状，并针对其研究的不足对其研究方向进行了展望。
油气田环境
点蚀机制
影响因素
stainless steel
oil and gas field environment
pitting corrosion mechanism
influence factor
Abstract
Stainless steel is widely used in oil and gas field environment due to its excellent corrosion resistance. However, in some complex oil and gas fields, stainless steel is still prone to pitting corrosion. In order to ensure the safe service of stainless steel, the status of pitting corrosion of stainless steel in oil and gas field environment is reviewed from the respects of pitting mechanism and influence factors of pitting corrosion. And the research directions are proposed according to the research shortages about pitting corrosion of stainless steel in oil and gas field environment.
中图分类号 TG172 TG174 DOI 10.11973/fsyfh-202002011
所属栏目 专论
基金项目 重庆市科委基础与前沿研究计划项目（CSTC2015JCYJA50003）；重庆高校优秀成果转化项目（KJZH17136）；重庆高校创新团队建设计划资助项目（CXTDX201601032）；重庆科技学院研究生科技创新项目（YKJCX1720206）
收稿日期 2018/9/22
修改稿日期
网络出版日期
作者单位点击查看
引用该论文: HOU Xianglong,CAO Xianlong,ZHANG Cheng,REN Quanyou,YAN Yongbo,YU Lin. Research Status of Pitting Corrosion of Stainless Steel in Oil and Gas Field Environment[J]. Corrosion & Protection, 2020, 41(2): 58
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王杰. 不锈钢表面耐点蚀性钝化膜的研究[D]. 成都:西南交通大学,2014.
【2】刘烈炜,胡倩,郭沨. 硫化氢对不锈钢表面钝化膜破坏的研究[J]. 中国腐蚀与防护学报,2002,22(1):22-26.
【3】吴玮巍,李劲,蒋益明. 不同浓度NaCl溶液中304或316不锈钢点蚀行为的电化学表征[C]//2006年宝钢学术年会. 上海:[出版者不详],2006.
【4】史艳华,于洋,梁平,等. 316L不锈钢在氯离子环境中的腐蚀行为[J]. 材料保护,2015,48(8):29-32.
【5】ALMARSHAD A I,JAMAL D. Electrochemical investigations of pitting corrosion behaviour of type UNS S316 stainless steel in thiosulfate-chloride environment[J]. Journal of Applied Electrochemistry,2004,34(1):67-70.
【6】DING J,ZHANG L,LU M,et al. The electrochemical behaviour of 316L austenitic stainless steel in Cl-, containing environment under different H2S partial pressures[J]. Applied Surface Science,2014,289(3):33-41.
【7】HINDS G,WICKSTRÖM L,MINGARD K,et al. Impact of surface condition on sulphide stress corrosion cracking of 316L stainless steel[J]. Corrosion Science,2013,71(3):43-52.
【8】ADAIR S T,ATTWOOD P A. In-service stress corrosion cracking of AISI 316L stainless steel in an H2S environment[J]. British Corrosion Journal,2014,49(5):396-400.
【9】薛俊鹏,于勇,张雷,等. H2S对316L不锈钢含Cl-环境下点蚀行为的影响[J]. 腐蚀与防护,2012,33(S2):106-109.
【10】ZHANG L. The corrosion behavior of 316L stainless steel in H2S environment at high temperatures[J]. International Journal of Electrochemical Science,2017,12(9):8806-8819.
【11】丁金慧,路民旭,杨萍,等. 316L奥氏体不锈钢在高浓度H2S-Cl-环境中的腐蚀行为[J]. 腐蚀与防护,2012,33(S2):96-99.
【12】唐俊文,邵亚薇,张涛,等. 饱和H2S对316L不锈钢腐蚀电化学行为的影响[J]. 中国腐蚀与防护学报,2010,30(3):246-250.
【13】MIYACHI T,OHKAWA S,MATSUZAWA H,et al. Corrosion resistance of weldable super 13Cr stainless steel in H2S containing CO2 environments[J]. Japanese Journal of Applied Physics,1996,35(5A):2814-2815.
【14】张金钟,谢俊峰,宋文文,等. Cl-浓度对316L不锈钢点蚀行为的影响[J]. 天然气与石油,2012,30(1):71-73.
【15】LV X H,ZHAO G X,ZHANG J B, et al. Corrosion behaviors of super 13Cr martensitic stainless steel under CO2 and H2S/CO2 environment[J]. Journal of University of Science & Technology Beijing,2010,32(2):207-212.
【16】姚鹏程,谢俊峰,杨春玉,等. 高温高压环境Cl-浓度和CO2分压对不锈钢油管的影响[J]. 全面腐蚀控制,2017,31(10):67-70.
【17】DING J,LEI Z,LI D,et al. Corrosion and stress corrosion cracking behavior of 316L austenitic stainless steel in high H2S-CO2-Cl- environment[J]. Journal of Materials Science,2013,48(10):3708-3715.
【18】HE W,KNUDSEN O,DIPLAS S. Corrosion of stainless steel 316L in simulated formation water environment with CO2-H2S-Cl-[J]. Corrosion Science,2009,51(12):2811-2819.
【19】李岩,方可伟,刘飞华. Cl-对304L不锈钢从点蚀到应力腐蚀转变行为的影响[J]. 腐蚀与防护,2012,33(11):955-959.
【20】郭志军,周建军,王克栋. 300系列奥氏体不锈钢在油田H2S-CO2-Cl-环境下耐蚀性研究[J]. 石油化工设备,2010,39(6):14-19.
【21】刘猛,左景辉,刘贤斌,等. 316L不锈钢在含H2S/CO2中的应力腐蚀行为研究[C]//2013中国油气田腐蚀与防护技术科技创新大会论文集.[出版地不详]:[出版者不详],2013:367-271.
【22】王硕,陶然. 316L不锈钢应力腐蚀慢应变速率拉伸试验[J]. 物理测试,2016,34(2):12-15.
【23】吴玮巍,蒋益明,廖家兴,等. 0Cr25Ni7Mo4、316与304不锈钢临界点蚀温度研究[J]. 腐蚀科学与防护技术,2006,18(4):285-288.
【24】邓博,蒋益明,郝允卫,等. F-和Cl-对316L不锈钢临界点蚀温度的协同作用[J]. 中国腐蚀与防护学报,2008,28(1):30-33.
【25】吴玮巍,蒋益明,廖家兴,等. Cl离子对304、316不锈钢临界点蚀温度的影响[J]. 腐蚀科学与防护技术,2007,19(1):16-19.
【26】艾莹珺,杜楠,赵晴,等. 温度对304不锈钢亚稳蚀孔萌生和稳态蚀孔几何特征的影响[J]. 中国腐蚀与防护学报,2017,37(2):135-141.
【27】周琦,张方卓,盛捷,等. 不同种不锈钢电化学腐蚀性能的对比[J]. 兰州理工大学学报,2015,41(1):1-6.
【28】董晓焕,姜毅,付彩利,等. 温度对Cr13不锈钢CO2腐蚀行为的影响[J]. 腐蚀与防护,2012,33(3):196-198.
【29】ZHANG H,ZHAO Y L,JIANG Z D. Effects of temperature on the corrosion behavior of 13Cr martensitic stainless steel during exposure to CO2 and Cl- environment[J]. Materials Letters,2005,59(27):3370-3374.
【30】叶超,杜楠,田文明,等. pH值对304不锈钢在3.5% NaCl溶液中点蚀过程的影响[J]. 中国腐蚀与防护学报,2015,35(1):38-42.
【31】张晖,李成涛,宋利君,等. pH对316L不锈钢电化学性能的影响[J]. 腐蚀与防护,2013,34(7):593-596.
【32】龚小芝,肖娟,左禹,等. 溶液pH值对不锈钢亚稳态孔蚀行为的影响[J]. 北京化工大学学报(自然科学版),2002,29(4):29-31.
【33】MALIK A U,KUTTY P C M,SIDDIQI N A,et al. The influence of pH and chloride concentration on the corrosion behaviour of AISI 316L steel in aqueous solutions[J]. Corrosion Science,1992,33(11):1809-1827.
【34】WANG J Z,WANG J Q,MING H L,et al. Effect of pH on corrosion behavior of 316L stainless steel in hydrogenated high temperature water[J]. Materials and Corrosion,2018,69(5):580-589.
【35】辛征,于勇,王元春,等. Cl-浓度对硫酸盐还原菌体系中316L不锈钢腐蚀行为的影响[J]. 材料保护,2014,47(5):57-60.
【36】张国超,林冠发,孙育禄,等.13Cr不锈钢腐蚀性能的研究现状与进展[J]. 全面腐蚀控制,2011,25(4):16-20.
【37】IKEDA A,UEDA M. Corrosion behaviour of Cr containing steels predicting CO2 corrosion in oil and gas industry[J]. Corrosion,1985,37(2):121-128.
【38】DENPO K,OGAWA H. Corrosion behavior of pipe and tube materials in injection systems[C]//Corrosion 1993. Houston,TX:NACE International,1993.
【39】朱岩. Ni、Mn、N对2507超级双相不锈钢组织和性能的影响[D]. 哈尔滨:哈尔滨理工大学,2014.
【40】JING H,XINQIANG W U,ZHENG Y,et al. Effect of Mo content on the corrosion and erosion-corrosion of stainless steel in oil containing naphthenic acid[J]. Acta Metallrugica Sinica,2002,38(10):1067-1073.
【41】PARDO A,MERINO M C,COY A E,et al. Pitting corrosion behaviour of austenitic stainless steels-combining effects of Mn and Mo additions[J]. Corrosion Science,2008,50(6):1796-1806.
【42】孙涛,邓博,徐菊良,等. 氮、铌添加对304奥氏体不锈钢电化学腐蚀行为的影响[J]. 中国腐蚀与防护学报,2010,30(6):421-426.
【43】YOON Y S,HA H Y,LEE T H,et al. Effect of N and C on stress corrosion cracking susceptibility of austenitic Fe18Cr10Mn-based stainless steels[J]. Corrosion Science,2014,80(3):28-36.
【44】TOMIO A,SAGARA M,DOI T,et al. Role of alloyed copper on corrosion resistance of austenitic stainless steel in H2S-Cl environment[J]. Corrosion Science,2014,81(4):144-151.
【45】朴楠,陈吉,尹成江,等. 超细晶304L不锈钢在含Cl-溶液中点蚀行为的研究[J]. 金属学报,2015,51(9):1077-1084.
【46】张雨溪,陈美玲,杨军. 超细SiC粉体对304不锈钢抗Cl-腐蚀性能影响[J]. 现代铸铁,2015,35(2):82-85.
【47】陈美玲,刘元栋,杨莉,等. 改性纳米SiC粉体强化铸造奥氏体不锈钢耐点蚀性能的研究[J]. 中国腐蚀与防护学报,2009,29(6):411-414.
【48】陈文怡,周建,胡明. 超细晶不锈钢腐蚀行为研究[J]. 腐蚀科学与防护技术,2013,25(3):233-237.
【49】陈文怡,周建,胡明. 超细晶不锈钢/TiC复合材料的电化学腐蚀行为[J]. 稀有金属材料与工程,2013,42(10):2068-2072.
【50】孙小燕,汪江节,刘孝光,等. 晶粒尺寸对316L不锈钢耐晶间腐蚀性能的影响[J]. 特种铸造及有色合金,2014,34(12):1250-1252.
【51】董小帅,王保成,何林英. 氯离子浓度与酸度对TTS443铁素体不锈钢耐蚀性能的影响[J]. 腐蚀科学与防护技术,2013,25(5):387-392.
【2】刘烈炜,胡倩,郭沨. 硫化氢对不锈钢表面钝化膜破坏的研究[J]. 中国腐蚀与防护学报,2002,22(1):22-26.
【3】吴玮巍,李劲,蒋益明. 不同浓度NaCl溶液中304或316不锈钢点蚀行为的电化学表征[C]//2006年宝钢学术年会. 上海:[出版者不详],2006.
【4】史艳华,于洋,梁平,等. 316L不锈钢在氯离子环境中的腐蚀行为[J]. 材料保护,2015,48(8):29-32.
【5】ALMARSHAD A I,JAMAL D. Electrochemical investigations of pitting corrosion behaviour of type UNS S316 stainless steel in thiosulfate-chloride environment[J]. Journal of Applied Electrochemistry,2004,34(1):67-70.
【6】DING J,ZHANG L,LU M,et al. The electrochemical behaviour of 316L austenitic stainless steel in Cl-, containing environment under different H2S partial pressures[J]. Applied Surface Science,2014,289(3):33-41.
【7】HINDS G,WICKSTRÖM L,MINGARD K,et al. Impact of surface condition on sulphide stress corrosion cracking of 316L stainless steel[J]. Corrosion Science,2013,71(3):43-52.
【8】ADAIR S T,ATTWOOD P A. In-service stress corrosion cracking of AISI 316L stainless steel in an H2S environment[J]. British Corrosion Journal,2014,49(5):396-400.
【9】薛俊鹏,于勇,张雷,等. H2S对316L不锈钢含Cl-环境下点蚀行为的影响[J]. 腐蚀与防护,2012,33(S2):106-109.
【10】ZHANG L. The corrosion behavior of 316L stainless steel in H2S environment at high temperatures[J]. International Journal of Electrochemical Science,2017,12(9):8806-8819.
【11】丁金慧,路民旭,杨萍,等. 316L奥氏体不锈钢在高浓度H2S-Cl-环境中的腐蚀行为[J]. 腐蚀与防护,2012,33(S2):96-99.
【12】唐俊文,邵亚薇,张涛,等. 饱和H2S对316L不锈钢腐蚀电化学行为的影响[J]. 中国腐蚀与防护学报,2010,30(3):246-250.
【13】MIYACHI T,OHKAWA S,MATSUZAWA H,et al. Corrosion resistance of weldable super 13Cr stainless steel in H2S containing CO2 environments[J]. Japanese Journal of Applied Physics,1996,35(5A):2814-2815.
【14】张金钟,谢俊峰,宋文文,等. Cl-浓度对316L不锈钢点蚀行为的影响[J]. 天然气与石油,2012,30(1):71-73.
【15】LV X H,ZHAO G X,ZHANG J B, et al. Corrosion behaviors of super 13Cr martensitic stainless steel under CO2 and H2S/CO2 environment[J]. Journal of University of Science & Technology Beijing,2010,32(2):207-212.
【16】姚鹏程,谢俊峰,杨春玉,等. 高温高压环境Cl-浓度和CO2分压对不锈钢油管的影响[J]. 全面腐蚀控制,2017,31(10):67-70.
【17】DING J,LEI Z,LI D,et al. Corrosion and stress corrosion cracking behavior of 316L austenitic stainless steel in high H2S-CO2-Cl- environment[J]. Journal of Materials Science,2013,48(10):3708-3715.
【18】HE W,KNUDSEN O,DIPLAS S. Corrosion of stainless steel 316L in simulated formation water environment with CO2-H2S-Cl-[J]. Corrosion Science,2009,51(12):2811-2819.
【19】李岩,方可伟,刘飞华. Cl-对304L不锈钢从点蚀到应力腐蚀转变行为的影响[J]. 腐蚀与防护,2012,33(11):955-959.
【20】郭志军,周建军,王克栋. 300系列奥氏体不锈钢在油田H2S-CO2-Cl-环境下耐蚀性研究[J]. 石油化工设备,2010,39(6):14-19.
【21】刘猛,左景辉,刘贤斌,等. 316L不锈钢在含H2S/CO2中的应力腐蚀行为研究[C]//2013中国油气田腐蚀与防护技术科技创新大会论文集.[出版地不详]:[出版者不详],2013:367-271.
【22】王硕,陶然. 316L不锈钢应力腐蚀慢应变速率拉伸试验[J]. 物理测试,2016,34(2):12-15.
【23】吴玮巍,蒋益明,廖家兴,等. 0Cr25Ni7Mo4、316与304不锈钢临界点蚀温度研究[J]. 腐蚀科学与防护技术,2006,18(4):285-288.
【24】邓博,蒋益明,郝允卫,等. F-和Cl-对316L不锈钢临界点蚀温度的协同作用[J]. 中国腐蚀与防护学报,2008,28(1):30-33.
【25】吴玮巍,蒋益明,廖家兴,等. Cl离子对304、316不锈钢临界点蚀温度的影响[J]. 腐蚀科学与防护技术,2007,19(1):16-19.
【26】艾莹珺,杜楠,赵晴,等. 温度对304不锈钢亚稳蚀孔萌生和稳态蚀孔几何特征的影响[J]. 中国腐蚀与防护学报,2017,37(2):135-141.
【27】周琦,张方卓,盛捷,等. 不同种不锈钢电化学腐蚀性能的对比[J]. 兰州理工大学学报,2015,41(1):1-6.
【28】董晓焕,姜毅,付彩利,等. 温度对Cr13不锈钢CO2腐蚀行为的影响[J]. 腐蚀与防护,2012,33(3):196-198.
【29】ZHANG H,ZHAO Y L,JIANG Z D. Effects of temperature on the corrosion behavior of 13Cr martensitic stainless steel during exposure to CO2 and Cl- environment[J]. Materials Letters,2005,59(27):3370-3374.
【30】叶超,杜楠,田文明,等. pH值对304不锈钢在3.5% NaCl溶液中点蚀过程的影响[J]. 中国腐蚀与防护学报,2015,35(1):38-42.
【31】张晖,李成涛,宋利君,等. pH对316L不锈钢电化学性能的影响[J]. 腐蚀与防护,2013,34(7):593-596.
【32】龚小芝,肖娟,左禹,等. 溶液pH值对不锈钢亚稳态孔蚀行为的影响[J]. 北京化工大学学报(自然科学版),2002,29(4):29-31.
【33】MALIK A U,KUTTY P C M,SIDDIQI N A,et al. The influence of pH and chloride concentration on the corrosion behaviour of AISI 316L steel in aqueous solutions[J]. Corrosion Science,1992,33(11):1809-1827.
【34】WANG J Z,WANG J Q,MING H L,et al. Effect of pH on corrosion behavior of 316L stainless steel in hydrogenated high temperature water[J]. Materials and Corrosion,2018,69(5):580-589.
【35】辛征,于勇,王元春,等. Cl-浓度对硫酸盐还原菌体系中316L不锈钢腐蚀行为的影响[J]. 材料保护,2014,47(5):57-60.
【36】张国超,林冠发,孙育禄,等.13Cr不锈钢腐蚀性能的研究现状与进展[J]. 全面腐蚀控制,2011,25(4):16-20.
【37】IKEDA A,UEDA M. Corrosion behaviour of Cr containing steels predicting CO2 corrosion in oil and gas industry[J]. Corrosion,1985,37(2):121-128.
【38】DENPO K,OGAWA H. Corrosion behavior of pipe and tube materials in injection systems[C]//Corrosion 1993. Houston,TX:NACE International,1993.
【39】朱岩. Ni、Mn、N对2507超级双相不锈钢组织和性能的影响[D]. 哈尔滨:哈尔滨理工大学,2014.
【40】JING H,XINQIANG W U,ZHENG Y,et al. Effect of Mo content on the corrosion and erosion-corrosion of stainless steel in oil containing naphthenic acid[J]. Acta Metallrugica Sinica,2002,38(10):1067-1073.
【41】PARDO A,MERINO M C,COY A E,et al. Pitting corrosion behaviour of austenitic stainless steels-combining effects of Mn and Mo additions[J]. Corrosion Science,2008,50(6):1796-1806.
【42】孙涛,邓博,徐菊良,等. 氮、铌添加对304奥氏体不锈钢电化学腐蚀行为的影响[J]. 中国腐蚀与防护学报,2010,30(6):421-426.
【43】YOON Y S,HA H Y,LEE T H,et al. Effect of N and C on stress corrosion cracking susceptibility of austenitic Fe18Cr10Mn-based stainless steels[J]. Corrosion Science,2014,80(3):28-36.
【44】TOMIO A,SAGARA M,DOI T,et al. Role of alloyed copper on corrosion resistance of austenitic stainless steel in H2S-Cl environment[J]. Corrosion Science,2014,81(4):144-151.
【45】朴楠,陈吉,尹成江,等. 超细晶304L不锈钢在含Cl-溶液中点蚀行为的研究[J]. 金属学报,2015,51(9):1077-1084.
【46】张雨溪,陈美玲,杨军. 超细SiC粉体对304不锈钢抗Cl-腐蚀性能影响[J]. 现代铸铁,2015,35(2):82-85.
【47】陈美玲,刘元栋,杨莉,等. 改性纳米SiC粉体强化铸造奥氏体不锈钢耐点蚀性能的研究[J]. 中国腐蚀与防护学报,2009,29(6):411-414.
【48】陈文怡,周建,胡明. 超细晶不锈钢腐蚀行为研究[J]. 腐蚀科学与防护技术,2013,25(3):233-237.
【49】陈文怡,周建,胡明. 超细晶不锈钢/TiC复合材料的电化学腐蚀行为[J]. 稀有金属材料与工程,2013,42(10):2068-2072.
【50】孙小燕,汪江节,刘孝光,等. 晶粒尺寸对316L不锈钢耐晶间腐蚀性能的影响[J]. 特种铸造及有色合金,2014,34(12):1250-1252.
【51】董小帅,王保成,何林英. 氯离子浓度与酸度对TTS443铁素体不锈钢耐蚀性能的影响[J]. 腐蚀科学与防护技术,2013,25(5):387-392.
相关信息
