Design of Quality Sampling and Inspection Program for Casing in Oil and Gas Field
摘 要
通过对套管失效案例的分析,明确了导致套管失效的主要原因是套管质量问题。结合标准与产品技术要求,提出了套管抽检项目、检测方法与结果处理方法。同时,结合现场抽检的实际情况,选取了统计抽样的方法,建立了一套适用于油气田的套管质量抽检方案,用于控制套管质量,避免再次发生因产品质量问题而导致的生产事故。
Abstract
Through the analysis of casing failure cases, it was clear that the main cause of casing failure was casing quality problems. Inspection items, inspection methods and result treatment scheme were given in combination with standards and product technical requirements. Meanwhile, based on the actual situation of field sampling, a statistical sampling method was chosen to set up a quality sampling and inspection program for casing in oil and gas filed. This program could be applied to controlling the quality of casing and preventing the recurrence of production accidents caused by product quality problems.
中图分类号 TG174 DOI 10.11973/fsyfh-202004007
所属栏目 应用技术
基金项目
收稿日期 2018/9/6
修改稿日期
网络出版日期
作者单位点击查看
引用该论文: GUO Jianhua,WANG Maomao,WEN Chunyu,LI Dapeng,WU Wei,WANG Xiuyun,CHEN Yingfeng. Design of Quality Sampling and Inspection Program for Casing in Oil and Gas Field[J]. Corrosion & Protection, 2020, 41(4): 33
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】李超,陈长青,刘文红,等. 套管失效案例及控制技术研究[J]. 石油矿场机械,2015,44(7):14-20.
【2】刘猛,孙鹏鹏,郭炳智. 煤层气用油、套管质量抽检方案优化[J]. 石油工业技术监督,2015,31(12):19-21.
【3】张蕾,张奕,宁明,等. 关于石油管质量监督抽查的思考[J]. 石油管材与仪,2016,2(3):79-81.
【4】李平全. 油套管的缺陷及其在建井期的典型失效案例《油套管标准研究、油套管失效分析及典型案例》[J]. 钢管,2007(2):57-60.
【5】顾晓贤,黄贺勇,胡国清. 石油套管螺纹联接质量的现场控制与评价[J]. 钻采工艺,1999(6):47-50.
【6】周滢. 监督抽查适用的抽样检验方案探讨[J]. 现代测量与实验室管理,2012,20(1):54-55.
【7】张健. 对抽样检验标准GB/T 2828.1-2012的理解[J]. 品牌与标准化,2015(7):49-50.
【8】李天雷. 油井管硫化物应力开裂双悬臂梁法试验研究[D]. 成都:西南石油大学,2007.
【9】姜放. 实验室评价管线钢抗硫化物应力开裂的四点弯曲法[J]. 天然气与石油,1998,16(3):31-33.
【10】WU S S,CHEN H H,RAMANDI H L,et al. Effects of environmental factors on stress corrosion cracking of cold-drawn high-carbon steel wires[J]. Corrosion Science,2018,132:234-243.
【2】刘猛,孙鹏鹏,郭炳智. 煤层气用油、套管质量抽检方案优化[J]. 石油工业技术监督,2015,31(12):19-21.
【3】张蕾,张奕,宁明,等. 关于石油管质量监督抽查的思考[J]. 石油管材与仪,2016,2(3):79-81.
【4】李平全. 油套管的缺陷及其在建井期的典型失效案例《油套管标准研究、油套管失效分析及典型案例》[J]. 钢管,2007(2):57-60.
【5】顾晓贤,黄贺勇,胡国清. 石油套管螺纹联接质量的现场控制与评价[J]. 钻采工艺,1999(6):47-50.
【6】周滢. 监督抽查适用的抽样检验方案探讨[J]. 现代测量与实验室管理,2012,20(1):54-55.
【7】张健. 对抽样检验标准GB/T 2828.1-2012的理解[J]. 品牌与标准化,2015(7):49-50.
【8】李天雷. 油井管硫化物应力开裂双悬臂梁法试验研究[D]. 成都:西南石油大学,2007.
【9】姜放. 实验室评价管线钢抗硫化物应力开裂的四点弯曲法[J]. 天然气与石油,1998,16(3):31-33.
【10】WU S S,CHEN H H,RAMANDI H L,et al. Effects of environmental factors on stress corrosion cracking of cold-drawn high-carbon steel wires[J]. Corrosion Science,2018,132:234-243.
相关信息