Experiment on phased array ultrasonic inspection technology of delamination damage ofcarbon fiber structure
摘 要
以碳纤维层压结构中容易产生的分层缺陷为研究对象,采用相控阵超声检测技术进行CIVA仿真和检测试验。通过声场及缺陷的建模和CIVA仿真检测试验,得出了碳纤维层压结构分层缺陷的理想检测参数。设计制作了模拟分层试验件,并进行实际检测试验,结果表明相控阵超声技术可以有效地检测该类缺陷。
Abstract
In this paper, the layered defects of carbon fiber laminated structures are studied, and the CIVA simulation and test are carried out by using ultrasonic phased array detection technology. Through the sound field and defect modeling and CIVA simulation test, the ideal detection parameters of carbon fiber laminated structure delamination defect are obtained. Through the design of simulated layered test pieces and actual test, it is shown that ultrasonic phased array can effectively detect such defects.
中图分类号 TG115.28 DOI 10.11973/wsjc202004010
所属栏目 试验研究
基金项目
收稿日期 2019/8/9
修改稿日期
网络出版日期
作者单位点击查看
联系人作者张海兵(ndt_zhb@126.com)
备注张海兵(1979-),男,副教授,硕士,研究方向为飞机无损检测评价
引用该论文: ZHANG Haibing,DU Baiqiang. Experiment on phased array ultrasonic inspection technology of delamination damage ofcarbon fiber structure[J]. Nondestructive Testing, 2020, 42(4): 46~49
张海兵,杜百强. 相控阵超声检测技术在碳纤维结构分层缺陷检测中的试验[J]. 无损检测, 2020, 42(4): 46~49
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】朱志强,万里鹰,黄基锐,等.碳纤维及其复合材料的研究进展[J]. 江西化工,2013(2):67-68.
【2】左延田,方雨, 刘晴岩,等. 角焊缝裂纹类缺陷相控阵超声检测工艺[J]. 无损检测, 2016, 38(6):7-8.
【3】竺哲明, 黄伟勇,郭伟灿.聚乙烯管道热熔对接接头的相控阵超声检测[J]. 无损检测, 2017, 39(1):39-40.
【4】薛利杰,刘晴岩,方雨,等.特种设备在役螺栓超声相控阵检测成像影响因素[J]. 无损检测,2016,38(7):7-9.
【2】左延田,方雨, 刘晴岩,等. 角焊缝裂纹类缺陷相控阵超声检测工艺[J]. 无损检测, 2016, 38(6):7-8.
【3】竺哲明, 黄伟勇,郭伟灿.聚乙烯管道热熔对接接头的相控阵超声检测[J]. 无损检测, 2017, 39(1):39-40.
【4】薛利杰,刘晴岩,方雨,等.特种设备在役螺栓超声相控阵检测成像影响因素[J]. 无损检测,2016,38(7):7-9.
相关信息