降低等离子喷涂涂层孔隙率的研究进展
Research Progress on Porosity Reduction in Plasma Sprayed Coatings
摘 要
等离子喷涂涂层具有耐磨、耐高温、耐腐蚀等优异性能，已广泛应用于表面防护领域。孔隙是等离子喷涂涂层的重要结构缺陷，孔隙过多会导致涂层过早脱落失效，缩短其服役寿命，所以孔隙率是评定涂层质量的重要指标。简单介绍了孔隙形成的机理、影响因素以及孔隙对涂层性能的影响，从优化喷涂工艺参数、激光重熔处理、改进喷涂材料等方面对降低等离子喷涂涂层孔隙率的研究现状进行了综述，并对等离子喷涂涂层发展中存在的问题及发展方向进行了总结。
等离子喷涂
激光重熔
porosity
plasma spraying
laser remelting
Abstract
Plasma sprayed coatings have been widely used in surface protection engineering due to the excellent properties such as wear resistance, high temperature resistance and corrosion resistance. Pores are an important structural defect of plasma sprayed coatings. Excessive pores can lead to premature detachment failure of the coatings and shorten the service life, and therefore porosity is an important indicator to evaluate the coating quality. The pore formation mechanism, influencing factors, and the effect of the pores on the coating performance are briefly discribed. The research status of the porosity reduction of plasma sprayed coatings is reviewed from the aspects such as spraying process parameter optimization, laser remelting treatment, and modification of spraying materials. Moreover, the problems and development directions in the development of plasma sprayed coatings are summarized.
中图分类号 TB321 DOI 10.11973/jxgccl202005012
所属栏目 专题报道(金属材料表面处理)
基金项目 国家自然科学基金资助项目（51572168）
收稿日期 2019/3/5
修改稿日期 2019/6/3
网络出版日期
作者单位点击查看
备注李成龙(1990-),男,辽宁锦州人,硕士研究生
引用该论文: LI Chenglong,LI Wenge,ZHAO Yuantao,ODHIAMBO Gerald,XIA Yu. Research Progress on Porosity Reduction in Plasma Sprayed Coatings[J]. Materials for mechancial engineering, 2020, 44(5): 60～65
李成龙,李文戈,赵远涛,ODHIAMBOGerald,夏雨. 降低等离子喷涂涂层孔隙率的研究进展[J]. 机械工程材料, 2020, 44(5): 60～65
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】宋长虹,张亚然,李世明,等.等离子喷涂技术制备陶瓷涂层新进展[J].热喷涂技术,2017,9(4):1-6.
【2】陈丽梅,李强.等离子喷涂技术现状及发展[J].热处理技术与装备,2006,27(1):1-5.
【3】王振民,黄石生,薛家祥,等.等离子喷涂设备的现状与进展[J].中国表面工程,2000,13(4):5-7.
【4】朱昱,魏金栋,周燕琴,等.等离子喷涂技术研究现状[J].现代化工,2016,36(6):46-50.
【5】毛杰,邓畅光,邓春明,等.基于孔隙率的Cr2O3涂层工艺优化及回归分析[J].中国表面工程,2013,26(4):38-43.
【6】孟令娟,肖巍,闵捷,等.陶瓷涂层SiO2-Al2O3溶胶封孔剂的制备及封孔性能[J].材料保护,2010,43(11):20-22.
【7】王东生.TiAl合金表面等离子喷涂MCrAlY及陶瓷涂层的激光重熔研究[D].南京:南京航空航天大学,2009:48-49.
【8】司力琼,王泽华,周泽华,等.提高热喷涂层致密性技术的研究现状及发展方向[J].材料保护,2011,44(8):51-55.
【9】张志彬,阎殿然,高国旗,等.等离子喷涂氧化锆涂层封孔处理的研究现状[J].陶瓷,2009(1):30-33.
【10】QIAO X,WANG Y M,WENG W X,et al.Influence of pores on mechanical properties of plasma sprayed coatings:Case study of YSZ thermal barrier coatings[J].Ceramics International, 2018,44(17):21564-21577.
【11】张玲,冯颖,马越.孔隙率对Al2O3陶瓷涂层绝缘轴承绝缘性能的影响[J].轴承,2017(6):45-47.
【12】张红松,王富耻,马壮,等.等离子涂层孔隙研究进展[J].材料导报,2006,20(7):16-18.
【13】姜超平,刘王强.热喷涂Fe基非晶涂层耐腐蚀性与孔隙率研究进展[J].表面技术,2017,46(5):238-243.
【14】FEI F L,HU J,WEI J X,et al.Corrosion performance of steel reinforcement in simulated concrete pore solutions in the presence of imidazoline quaternary ammonium salt corrosion inhibitor[J].Construction and Building Materials, 2014,70:43-53.
【15】CHEN Y D,YANG Y,CHU Z H,et al.Microstructure and properties of Al2O3-ZrO2 composite coatings prepared by air plasma spraying[J].Applied Surface Science,2018,431:93-100.
【16】LIU K,TANG J J,BAI Y,et al.Particle in-flight behavior and its influence on the microstructure and mechanical property of plasma sprayed La2Ce2O7 thermal barrier coatings[J].Materials Science and Engineering:A,2015,625:177-185.
【17】MA G Z,CHEN S Y,HE P F,et al.Particle in-flight status and its influence on the properties of supersonic plasma-sprayed Fe-based amorphous metallic coatings[J].Surface and Coatings Technology, 2019,358:394-403.
【18】BAI Y,ZHAO L,QU Y M,et al.Particle in-flight behavior and its influence on the microstructure and properties of supersonic-atmospheric-plasma-sprayed nanostructured thermal barrier coatings[J].Journal of Alloys and Compounds, 2015,644:873-882.
【19】MAUER G,VAßEN R,STÖVER D.Atmospheric plasma spraying of yttria-stabilized zirconia coatings with specific porosity[J].Surface and Coatings Technology, 2009,204(1/2):172-179.
【20】吴新灿,陈熙.等离子体喷涂中涂层形成的模拟[J].清华大学学报(自然科学版),2003,43(11):1503-1506.
【21】ZHANG X C,XU B S,XUAN F Z,et al.Microstructural and porosity variations in the plasma-sprayed Ni-alloy coatings prepared at different spraying powers[J].Journal of Alloys and Compounds, 2009,473(1/2):145-151.
【22】古思勇,张厚安,颜建辉,等.等离子喷涂距离和氩气流量对MoSi2涂层结构的影响[J].矿冶工程,2009,29(6):78-81.
【23】THIRUMALAIKUMARASAMY D,SHANMUGAM K,BALASUBRAMANIAN V.Influences of atmospheric plasma spraying parameters on the porosity level of alumina coating on AZ31B magnesium alloy using response surface methodology[J].Progress in Natural Science:Materials International, 2012,22(5):468-479.
【24】周超极,朱胜,王晓明,等.热喷涂涂层缺陷形成机理与组织结构调控研究概述[J].材料导报,2018,32(19):3444-3455.
【25】杨红亮,李新梅,张景.等离子喷涂Al2O3-13%TiO2涂层组织和冲蚀性能的研究[J].铸造技术,2017,38(7):1602-1604.
【26】KARTHIKEYAN S,BALASUBRAMANIAN V,RAJENDRAN R.Developing empirical relationships to estimate porosity and microhardness of plasma-sprayed YSZ coatings[J].Ceramics International, 2014,40(2):3171-3183.
【27】KARTHIKEYAN S,BALASUBRAMANIAN V,RAJENDRAN R.Developing empirical relationships to estimate porosity and Young's modulus of plasma sprayed YSZ coatings[J].Applied Surface Science, 2014,296:31-46.
【28】崔华威,崔秀芳,王海斗,等.微观缺陷对等离子喷涂TiN涂层力学性能的影响[J].粉末冶金材料科学与工程,2014,19(6):909-916.
【29】王韶云,李国禄,王海斗,等.微缺陷对热喷涂涂层接触疲劳性能的影响[J].材料工程,2012,40(2):72-76.
【30】李兴成,陈菊芳.镁合金表面等离子喷涂Al2O3-TiO2陶瓷涂层的耐腐蚀性研究[J].表面技术,2012,41(2):20-22.
【31】ZHANG X C,XU B S,XUAN F Z,et al.Statistical analyses of porosity variations in plasma-sprayed Ni-based coatings[J].Journal of Alloys and Compounds, 2009,467(1/2):501-508.
【32】李力.喷涂距离对等离子喷涂Al2O3陶瓷涂层结构性能的影响[J].航天制造技术,2017(4):52-53.
【33】张娜,周勇,吴限.喷涂涂层激光重熔技术的研究进展[J].热处理技术与装备,2011,32(1):1-4.
【34】李朋,李玉海,杨慧宾,等.激光重熔对材料表面激光熔覆层的影响[J].热加工工艺,2007,36(3):64-66.
【35】赵子云.激光重熔技术对金属材料性能的影响[J].计算机产品与流通,2017(11):274-274.
【36】刘立群,周泽华,王泽华,等.激光重熔处理等离子喷涂陶瓷涂层的研究现状及展望[J].陶瓷学报,2012,33(2):235-240.
【37】王东生,田宗军,王松林,等.激光重熔等离子喷涂WC颗粒增强镍基涂层组织及高温磨损性能[J].焊接学报,2012,33(11):13-16.
【38】李志明,钱士强.激光重熔等离子喷涂涂层研究现状与展望[J].上海工程技术大学学报,2009,23(3):263-269.
【39】华绍春,王汉功,汪刘应,等.热喷涂技术的研究进展[J].金属热处理,2008,33(5):82-87.
【40】赵运才,何文,张佳茹.扫描速度对激光重熔金属陶瓷涂层温度场的影响[J].润滑与密封,2017,42(10):23-30.
【41】陈松,董天顺,李国禄,等.热喷涂层的重熔技术及其发展现状[J].焊接技术,2016,45(5):76-79.
【42】GOK M G,GOLLER G.Microstructural evaluation of laser remelted gadolinium zirconate thermal barrier coatings[J].Surface and Coatings Technology, 2015,276:202-209.
【43】DONG T S,LIU L,LI G L,et al.Effect of induction remelting on microstructure and wear resistance of plasma sprayed NiCrBSiNb coatings[J].Surface and Coatings Technology, 2019,364:347-357.
【44】尹斌,周惠娣,徐海燕,等.激光重熔对NiCrBSi等离子喷涂层显微结构和性能的影响[J].材料保护,2011,44(3):71-73.
【45】宫文彪.等离子喷涂三元纳米ZrO2-Y2O3/CeO2热障涂层的组织与性能研究[D].长春:吉林大学,2007:45-46.
【46】何臣,侯书恩.纳米材料在纳米热喷涂中的应用[J].湖北汽车工业学院学报,2005,19(1):27-29.
【47】栗卓新,汤春天,蒋建敏,等.纳米陶瓷材料在热喷涂中应用的研究进展[J].新技术新工艺,2005(10):56-59.
【48】张燕,张行,刘朝辉,等.热喷涂技术与热喷涂材料的发展现状[J].装备环境工程,2013,10(3):59-62.
【49】魏璐,李京龙,李贺军.热喷涂纳米结构涂层的研究[J].焊接,2007(3):18-23.
【50】何庆兵,李忠盛,吴护林,等.等离子喷涂ZrO2基纳米涂层研究进展[J].兵器装备工程学报,2016,37(11):128-132.
【51】王红英,李志军,汤伟杰,等.等离子喷涂氧化锆涂层及激光重熔涂层的摩擦磨损性能[J].焊接学报,2014,35(4):41-44.
【52】成志芳,马壮,卢林.等离子喷涂Al2O3-13%TiO2涂层微观组织形貌分析[J].表面技术,2012,41(3):9-11.
【53】LI B,JIA J H,HAN M M,et al.Microstructure,mechanical and tribological properties of plasma-sprayed NiCrAlY-Mo-Ag coatings from conventional and nanostructured powders[J].Surface and Coatings Technology, 2017,324:552-559.
【54】李万青,林铁松,宋超群,等.超音速等离子喷涂WC-17Co纳米涂层的性能[J].稀有金属材料与工程,2017,46(3):807-811.
【55】于惠博,孙宏飞,武彬,等.降低涂层孔隙率的研究进展[J].材料导报,2007,21(1):68-71.
【56】周红霞,王亮,彭飞,等.纳米稀土对热喷涂WC-12Co涂层的改性作用[J].材料热处理学报,2009,30(2):162-166.
【57】贾近,刘赛月,孟君晟,等.面向高端装备零部件的稀土改性MCrAlY涂层[J].中国表面工程,2018,31(5):54-62.
【58】贺定勇,阎玉芹,蒋建敏,等.含稀土元素的奥氏体不锈钢型耐腐蚀热喷涂粉芯线材的研究[J].北京工业大学学报,1998,24(3):71-75.
【59】陈琳,张三平,周学杰.降低热喷涂涂层孔隙率的工艺技术[J].上海金属,2004,26(4):41-43.
【60】HE L,TAN Y F,WANG X L,et al.Microstructure and wear properties of Al2O3-CeO2/Ni-base alloy composite coatings on aluminum alloys by plasma spray[J].Applied Surface Science,2014,314:760-767.
【61】孙永兴,王引真,何艳玲.稀土氧化物添加剂对Al2O3等离子喷涂层的影响[J].材料保护,2001,34(6):8-9.
【62】施晓雨.Ce对高铝青铜超音速等离子喷涂层组织及性能的影响[D].兰州:兰州理工大学,2013:20-21.
【63】张金星,肖舒,马得贵,等.等离子喷涂镍基Al2O3梯度涂层的组织与结合性能[J].热加工工艺,2013,42(16):113-116.
【64】宋洪源,乌日开西·艾依提,尹瀛月.等离子喷涂Al2O3涂层质量的研究现状[J].热加工工艺,2017,46(12):44-47.
【65】陈燕,芦笙,陈静,等.AZ91D镁合金等离子喷涂Ni-Al/陶瓷涂层的组织和性能[J].中国有色金属学报,2012,22(4):1094-1101.
【2】陈丽梅,李强.等离子喷涂技术现状及发展[J].热处理技术与装备,2006,27(1):1-5.
【3】王振民,黄石生,薛家祥,等.等离子喷涂设备的现状与进展[J].中国表面工程,2000,13(4):5-7.
【4】朱昱,魏金栋,周燕琴,等.等离子喷涂技术研究现状[J].现代化工,2016,36(6):46-50.
【5】毛杰,邓畅光,邓春明,等.基于孔隙率的Cr2O3涂层工艺优化及回归分析[J].中国表面工程,2013,26(4):38-43.
【6】孟令娟,肖巍,闵捷,等.陶瓷涂层SiO2-Al2O3溶胶封孔剂的制备及封孔性能[J].材料保护,2010,43(11):20-22.
【7】王东生.TiAl合金表面等离子喷涂MCrAlY及陶瓷涂层的激光重熔研究[D].南京:南京航空航天大学,2009:48-49.
【8】司力琼,王泽华,周泽华,等.提高热喷涂层致密性技术的研究现状及发展方向[J].材料保护,2011,44(8):51-55.
【9】张志彬,阎殿然,高国旗,等.等离子喷涂氧化锆涂层封孔处理的研究现状[J].陶瓷,2009(1):30-33.
【10】QIAO X,WANG Y M,WENG W X,et al.Influence of pores on mechanical properties of plasma sprayed coatings:Case study of YSZ thermal barrier coatings[J].Ceramics International, 2018,44(17):21564-21577.
【11】张玲,冯颖,马越.孔隙率对Al2O3陶瓷涂层绝缘轴承绝缘性能的影响[J].轴承,2017(6):45-47.
【12】张红松,王富耻,马壮,等.等离子涂层孔隙研究进展[J].材料导报,2006,20(7):16-18.
【13】姜超平,刘王强.热喷涂Fe基非晶涂层耐腐蚀性与孔隙率研究进展[J].表面技术,2017,46(5):238-243.
【14】FEI F L,HU J,WEI J X,et al.Corrosion performance of steel reinforcement in simulated concrete pore solutions in the presence of imidazoline quaternary ammonium salt corrosion inhibitor[J].Construction and Building Materials, 2014,70:43-53.
【15】CHEN Y D,YANG Y,CHU Z H,et al.Microstructure and properties of Al2O3-ZrO2 composite coatings prepared by air plasma spraying[J].Applied Surface Science,2018,431:93-100.
【16】LIU K,TANG J J,BAI Y,et al.Particle in-flight behavior and its influence on the microstructure and mechanical property of plasma sprayed La2Ce2O7 thermal barrier coatings[J].Materials Science and Engineering:A,2015,625:177-185.
【17】MA G Z,CHEN S Y,HE P F,et al.Particle in-flight status and its influence on the properties of supersonic plasma-sprayed Fe-based amorphous metallic coatings[J].Surface and Coatings Technology, 2019,358:394-403.
【18】BAI Y,ZHAO L,QU Y M,et al.Particle in-flight behavior and its influence on the microstructure and properties of supersonic-atmospheric-plasma-sprayed nanostructured thermal barrier coatings[J].Journal of Alloys and Compounds, 2015,644:873-882.
【19】MAUER G,VAßEN R,STÖVER D.Atmospheric plasma spraying of yttria-stabilized zirconia coatings with specific porosity[J].Surface and Coatings Technology, 2009,204(1/2):172-179.
【20】吴新灿,陈熙.等离子体喷涂中涂层形成的模拟[J].清华大学学报(自然科学版),2003,43(11):1503-1506.
【21】ZHANG X C,XU B S,XUAN F Z,et al.Microstructural and porosity variations in the plasma-sprayed Ni-alloy coatings prepared at different spraying powers[J].Journal of Alloys and Compounds, 2009,473(1/2):145-151.
【22】古思勇,张厚安,颜建辉,等.等离子喷涂距离和氩气流量对MoSi2涂层结构的影响[J].矿冶工程,2009,29(6):78-81.
【23】THIRUMALAIKUMARASAMY D,SHANMUGAM K,BALASUBRAMANIAN V.Influences of atmospheric plasma spraying parameters on the porosity level of alumina coating on AZ31B magnesium alloy using response surface methodology[J].Progress in Natural Science:Materials International, 2012,22(5):468-479.
【24】周超极,朱胜,王晓明,等.热喷涂涂层缺陷形成机理与组织结构调控研究概述[J].材料导报,2018,32(19):3444-3455.
【25】杨红亮,李新梅,张景.等离子喷涂Al2O3-13%TiO2涂层组织和冲蚀性能的研究[J].铸造技术,2017,38(7):1602-1604.
【26】KARTHIKEYAN S,BALASUBRAMANIAN V,RAJENDRAN R.Developing empirical relationships to estimate porosity and microhardness of plasma-sprayed YSZ coatings[J].Ceramics International, 2014,40(2):3171-3183.
【27】KARTHIKEYAN S,BALASUBRAMANIAN V,RAJENDRAN R.Developing empirical relationships to estimate porosity and Young's modulus of plasma sprayed YSZ coatings[J].Applied Surface Science, 2014,296:31-46.
【28】崔华威,崔秀芳,王海斗,等.微观缺陷对等离子喷涂TiN涂层力学性能的影响[J].粉末冶金材料科学与工程,2014,19(6):909-916.
【29】王韶云,李国禄,王海斗,等.微缺陷对热喷涂涂层接触疲劳性能的影响[J].材料工程,2012,40(2):72-76.
【30】李兴成,陈菊芳.镁合金表面等离子喷涂Al2O3-TiO2陶瓷涂层的耐腐蚀性研究[J].表面技术,2012,41(2):20-22.
【31】ZHANG X C,XU B S,XUAN F Z,et al.Statistical analyses of porosity variations in plasma-sprayed Ni-based coatings[J].Journal of Alloys and Compounds, 2009,467(1/2):501-508.
【32】李力.喷涂距离对等离子喷涂Al2O3陶瓷涂层结构性能的影响[J].航天制造技术,2017(4):52-53.
【33】张娜,周勇,吴限.喷涂涂层激光重熔技术的研究进展[J].热处理技术与装备,2011,32(1):1-4.
【34】李朋,李玉海,杨慧宾,等.激光重熔对材料表面激光熔覆层的影响[J].热加工工艺,2007,36(3):64-66.
【35】赵子云.激光重熔技术对金属材料性能的影响[J].计算机产品与流通,2017(11):274-274.
【36】刘立群,周泽华,王泽华,等.激光重熔处理等离子喷涂陶瓷涂层的研究现状及展望[J].陶瓷学报,2012,33(2):235-240.
【37】王东生,田宗军,王松林,等.激光重熔等离子喷涂WC颗粒增强镍基涂层组织及高温磨损性能[J].焊接学报,2012,33(11):13-16.
【38】李志明,钱士强.激光重熔等离子喷涂涂层研究现状与展望[J].上海工程技术大学学报,2009,23(3):263-269.
【39】华绍春,王汉功,汪刘应,等.热喷涂技术的研究进展[J].金属热处理,2008,33(5):82-87.
【40】赵运才,何文,张佳茹.扫描速度对激光重熔金属陶瓷涂层温度场的影响[J].润滑与密封,2017,42(10):23-30.
【41】陈松,董天顺,李国禄,等.热喷涂层的重熔技术及其发展现状[J].焊接技术,2016,45(5):76-79.
【42】GOK M G,GOLLER G.Microstructural evaluation of laser remelted gadolinium zirconate thermal barrier coatings[J].Surface and Coatings Technology, 2015,276:202-209.
【43】DONG T S,LIU L,LI G L,et al.Effect of induction remelting on microstructure and wear resistance of plasma sprayed NiCrBSiNb coatings[J].Surface and Coatings Technology, 2019,364:347-357.
【44】尹斌,周惠娣,徐海燕,等.激光重熔对NiCrBSi等离子喷涂层显微结构和性能的影响[J].材料保护,2011,44(3):71-73.
【45】宫文彪.等离子喷涂三元纳米ZrO2-Y2O3/CeO2热障涂层的组织与性能研究[D].长春:吉林大学,2007:45-46.
【46】何臣,侯书恩.纳米材料在纳米热喷涂中的应用[J].湖北汽车工业学院学报,2005,19(1):27-29.
【47】栗卓新,汤春天,蒋建敏,等.纳米陶瓷材料在热喷涂中应用的研究进展[J].新技术新工艺,2005(10):56-59.
【48】张燕,张行,刘朝辉,等.热喷涂技术与热喷涂材料的发展现状[J].装备环境工程,2013,10(3):59-62.
【49】魏璐,李京龙,李贺军.热喷涂纳米结构涂层的研究[J].焊接,2007(3):18-23.
【50】何庆兵,李忠盛,吴护林,等.等离子喷涂ZrO2基纳米涂层研究进展[J].兵器装备工程学报,2016,37(11):128-132.
【51】王红英,李志军,汤伟杰,等.等离子喷涂氧化锆涂层及激光重熔涂层的摩擦磨损性能[J].焊接学报,2014,35(4):41-44.
【52】成志芳,马壮,卢林.等离子喷涂Al2O3-13%TiO2涂层微观组织形貌分析[J].表面技术,2012,41(3):9-11.
【53】LI B,JIA J H,HAN M M,et al.Microstructure,mechanical and tribological properties of plasma-sprayed NiCrAlY-Mo-Ag coatings from conventional and nanostructured powders[J].Surface and Coatings Technology, 2017,324:552-559.
【54】李万青,林铁松,宋超群,等.超音速等离子喷涂WC-17Co纳米涂层的性能[J].稀有金属材料与工程,2017,46(3):807-811.
【55】于惠博,孙宏飞,武彬,等.降低涂层孔隙率的研究进展[J].材料导报,2007,21(1):68-71.
【56】周红霞,王亮,彭飞,等.纳米稀土对热喷涂WC-12Co涂层的改性作用[J].材料热处理学报,2009,30(2):162-166.
【57】贾近,刘赛月,孟君晟,等.面向高端装备零部件的稀土改性MCrAlY涂层[J].中国表面工程,2018,31(5):54-62.
【58】贺定勇,阎玉芹,蒋建敏,等.含稀土元素的奥氏体不锈钢型耐腐蚀热喷涂粉芯线材的研究[J].北京工业大学学报,1998,24(3):71-75.
【59】陈琳,张三平,周学杰.降低热喷涂涂层孔隙率的工艺技术[J].上海金属,2004,26(4):41-43.
【60】HE L,TAN Y F,WANG X L,et al.Microstructure and wear properties of Al2O3-CeO2/Ni-base alloy composite coatings on aluminum alloys by plasma spray[J].Applied Surface Science,2014,314:760-767.
【61】孙永兴,王引真,何艳玲.稀土氧化物添加剂对Al2O3等离子喷涂层的影响[J].材料保护,2001,34(6):8-9.
【62】施晓雨.Ce对高铝青铜超音速等离子喷涂层组织及性能的影响[D].兰州:兰州理工大学,2013:20-21.
【63】张金星,肖舒,马得贵,等.等离子喷涂镍基Al2O3梯度涂层的组织与结合性能[J].热加工工艺,2013,42(16):113-116.
【64】宋洪源,乌日开西·艾依提,尹瀛月.等离子喷涂Al2O3涂层质量的研究现状[J].热加工工艺,2017,46(12):44-47.
【65】陈燕,芦笙,陈静,等.AZ91D镁合金等离子喷涂Ni-Al/陶瓷涂层的组织和性能[J].中国有色金属学报,2012,22(4):1094-1101.
相关信息
