Eddy current testing of titanium alloy heat transfer tube expansion area
摘 要
针对传热管胀接区涡流检测的难点,研究了旋转涡流检测工艺,通过对模拟试样、换热管管板试样胀接区的试验确定了合适的涡流检测工艺参数,并结合胀接管的解剖、渗透检测结果对比验证了检测方案的有效性。在应用中对几千余处换热管胀接区进行了检测,经水压试验、泄漏检测验证,换热管胀接区的旋转涡流检测工艺是可靠的。
Abstract
This paper focuses on the difficulty of eddy current testing of the expansion zone, and studies the rotary eddy current testing process. Suitable technological parameters were determined by testing of sample and heat transfer tube plate. The results of expansion tube anatomy and penetration testing show that the scheme is effective. For the application of the method, thousands of heat tube expansion zone were tested, and the reliability of the rotary vortex current testing process was verified by water pressure testing and leakage testing.
中图分类号 TG115.28 DOI 10.11973/wsjc202005003
所属栏目 试验研究
基金项目
收稿日期 2019/7/10
修改稿日期
网络出版日期
作者单位点击查看
备注孙鹏远(1989-),男,硕士,主要从事无损检测新技术应用研究工作
引用该论文: SUN Pengyuan,LI Bin,WANG Fuxi,WANG Haideng. Eddy current testing of titanium alloy heat transfer tube expansion area[J]. Nondestructive Testing, 2020, 42(5): 10~13
孙鹏远,李斌,王伏喜,王海登. 钛合金换热器传热管胀接区的涡流检测[J]. 无损检测, 2020, 42(5): 10~13
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王家建, 韩捷,高厚秀.蒸汽发生器传热管胀管区旋转涡流探头检查技术研究[J].机械工程师,2016(1):147-149.
【2】候维娜, 屈双惠.涡流检测的现状及新进展[J].重庆工学院学报,2007,21(8):67-70.
【2】候维娜, 屈双惠.涡流检测的现状及新进展[J].重庆工学院学报,2007,21(8):67-70.
相关信息