Infrared nondestructive testing technique based on specular reflection
摘 要
针对红外无损检测技术在某类工程应用中遇到的可达性不足的问题,提出了一种利用镜面反射以扩大可检测范围的方法。介绍了该方法的检测原理及检测系统,并设计制备了不同材料的人工缺陷试块,分别采用常规红外无损检测与镜面反射的红外无损检测方法,对人工缺陷试块进行了试验。对各组试验结果进行对比,阐述了影响试验结果的确定因素,分析了影响检测灵敏度的其他相关因素,并对试验的改进方向提出建议。
Abstract
In order to inspect some inaccessible areas for the infrared NDT, the author provides with a new technique, using specular reflection to expand the reachable area in practical work. This paper gives a brief introduction on the test principle and system. Different test specimens are designed and manufactured with artificial defects. Series of tests are carried out on these specimens by infrared NDT with or without specular reflection. The results are compared and analyzed after the tests. Some determined influencing factors of the test sensitivity are given and the related influencing factors are discussed. More details and suggestions are given in the end to promote the test and technique.
中图分类号 TG115.28 DOI 10.11973/wsjc202005005
所属栏目 试验研究
基金项目
收稿日期 2019/7/25
修改稿日期
网络出版日期
作者单位点击查看
备注眭霄翔(1989-),男,本科,工程师,主要从事无损检测技术研究和核电厂在役检查工作
引用该论文: SUI Xiaoxiang,GAO Jianmin,LIU Buliang,WU Wenhao,JIANG Haijun. Infrared nondestructive testing technique based on specular reflection[J]. Nondestructive Testing, 2020, 42(5): 18~23
眭霄翔,高建民,刘步良,吴文昊,江海军. 基于镜面反射的红外无损检测技术[J]. 无损检测, 2020, 42(5): 18~23
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】葛邦, 杨涛,高殿斌.复合材料无损检测技术研究进展[J].玻璃钢/复合材料,2009,15(6):67-71.
【2】丁克勤. 红外无损检测技术研究现状与发展趋势[J].中国锅炉压力容器安全,2000,16(6):47-51.
【3】王焰, 张炜,杨正伟.玻璃纤维复合材料分层缺陷的红外热波检测[J].无损检测,2010,32(11):880-883.
【4】张剑, 齐署华.红外热成像技术在复合材料无损检测中的应用现状[J].工程塑料应用,2015,43(11):122-126.
【5】张金玉, 杨正伟,田干.红外热波检测及其图像序列处理技术[M].北京:国防工业出版社,2015.
【2】丁克勤. 红外无损检测技术研究现状与发展趋势[J].中国锅炉压力容器安全,2000,16(6):47-51.
【3】王焰, 张炜,杨正伟.玻璃纤维复合材料分层缺陷的红外热波检测[J].无损检测,2010,32(11):880-883.
【4】张剑, 齐署华.红外热成像技术在复合材料无损检测中的应用现状[J].工程塑料应用,2015,43(11):122-126.
【5】张金玉, 杨正伟,田干.红外热波检测及其图像序列处理技术[M].北京:国防工业出版社,2015.
相关信息