扫一扫 加微信
首页 > 期刊论文 > 论文摘要
国内镀锌钢绞线标准对比
          
Domestic Standards Comparison of Zinc-coated Steel Stranded Conductor

摘    要
对目前国内常用的镀锌钢绞线标准进行对比分析,重点比较了各标准中对绞线结构、绞向和绞线节径比、绞制增量、绞线单位长度质量、绞线直流电阻、绞线综合拉断力等的要求。结果表明:GB/T 1179—2017覆盖了架空地线的常用规格,绞线参数合理准确,且增加了绞线直流电阻参数,方便用户根据不同需求选择合适型号规格的绞线。
标    签 镀锌钢绞线   标准对比   节径比   绞制增量   拉断力   zinc-coated steel stranded conductor   standard comparison   lay ratio   stranding increment   tensile force  
 
Abstract
The mainly domestic standards of zinc-coated steel stranded conductor were compared and analyzed. The requirements of each standard, such as stranded conductor structure, direction and lay ratio of stranded conductor, stranding increment, mass per unit length of stranded conductor, direct-current resistance of stranded conductor and comprehensive tensile force of stranded conductor were compared. The results show that GB/T 1179-2017 covered the common specifications of overhead ground wire. The parameters of the stranded conductor were reasonable and accurate. The direct-current resistance parameters of the stranded conductor were added, which made it convenient for users to selected the appropriate type and specification of the stranded conductor according to different needs.

中图分类号 TM752   DOI 10.11973/lhjy-wl202006008

 
  中国光学期刊网论文下载说明


所属栏目 标准化

基金项目 国家重点研发计划(2018YFF0214301)

收稿日期 2019/6/24

修改稿日期

网络出版日期

作者单位点击查看

备注王煦(1986-),男,工程师,主要从事输电材料检测、开发及标准化工作,wangxucsu@163.com

引用该论文: WANG Xu,WANG Hongmei. Domestic Standards Comparison of Zinc-coated Steel Stranded Conductor[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2020, 56(6): 29~32
王煦,王红梅. 国内镀锌钢绞线标准对比[J]. 理化检验-物理分册, 2020, 56(6): 29~32


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】张殿生. 电力工程高压送电线路设计手册[M]. 2版.北京:中国电力出版社,2002.
 
【2】王中. 钢芯铝绞线的捻劲与节径比[J]. 电力建设,2003,24(6):29-32.
 
相关信息
   标题 相关频次
 3种金属材料夏比冲击试验方法标准分析及对比
 2
 短时过负荷对架空导线单线力学性能的影响
 2
 工业CT无损检测国内外标准对比
 2
 管线钢在干湿交替环境下的腐蚀
 2
 航空紧固件铝涂层标准对比与分析
 2
 核电金属材料拉伸试验不同标准体系要求的对比分析
 2
 铝包带包裹高压输电线路导线的微动损伤
 2
 某钢芯铝绞线预绞式接头断裂原因分析
 2
 某铝包复合材料芯软铝型线绞线断裂原因分析
 2
 数字射线检测标准NB/T 47013.11-2015与SY/T 6423.5-2014的对比
 2
 0Cr18Ni9、1Cr13和1Cr17不锈钢在熔融LiCl-5%Li2O中的腐蚀行为
 1
 316L不锈钢在熔融LiCl-3%Li2O中的腐蚀行为
 1
 DNA-Fe配合物生物聚合离子膜修饰玻碳电极的制备及其用作过氧化氢电化学传感器的研究
 1
 JB/T 4730—2005与SY/T 4109—2005标准射线部分的主要区别
 1
 Ti3Al金属间化合物在熔融LiCl-Li2O中的热腐蚀行为
 1
 超超临界火电机组中烟气-凝结水换热器系统的应用
 1
 动载条件下16Mn钢在模拟大气环境中的氢渗透行为
 1
 蜂窝芯体厚度对Nomex蜂窝夹层复合材料压缩性能的影响
 1
 腐蚀对TC17钛合金超高周疲劳性能的影响
 1
 国内外镀锡板硬度试验标准对比分析
 1
 国内外金属材料热机械疲劳试验方法标准比较
 1
 环形炉内罩用310S耐热不锈钢的蠕变寿命预测
 1
 基于热裂解-气相色谱-质谱法和随机森林的加热卷烟烟叶原料适用性评估
 1