Phased array ultrasonic testing for the same steel welds in the safe-end of pressure vessels in nuclear power plants
摘 要
反应堆压力容器接管安全端与主管道对接接头属奥氏体不锈钢同种钢焊缝,受晶粒粗大等因素的影响,其常规超声检测的难度较大。结合焊接结构特点以及相控阵超声检测技术的优势,提出了一种接管安全端同种钢焊缝相控阵超声检测技术方案,阐述了相控阵探头参数设计方法,并根据确定的参数进行声场模拟和实测验证;使用参考试块、相控阵探头与常规探头进行了对比试验。试验结果表明,设计的相控阵检测技术方案可以有效地对接管安全端同种焊缝进行检测,定量能力高于常规超声检测技术的定量能力,并能有效减少探头数量和检测时间。
Abstract
The joint between the safe-end of the reactor pressure vessel and the main pipe is the same kind of steel weldof austenitic stainless steel. The conventional ultrasonic inspection is difficult to cope with the task due to coarse grain. Combining the characteristics of welded structure and the advantages of phased array detection, a technical scheme for phased array ultrasonic inspection of the same kind of steel weld is proposed, and the parameter design method of phased array probe is described. The parameters determined by the technical scheme are simulated by the sound field and verified by the actual test. Finally, the comparison test between the reference test block and the conventional probe is carried out. The test results show that the designed phased array detection technology can effectively test the same kind of weld on the safe-end of the nozzle. Its detection ability is higher than that of conventional ultrasonic testing technology, and it can effectively reduce the number of probes and inspection time.
中图分类号 TG115.28 DOI 10.11973/wsjc202006009
所属栏目 试验研究
基金项目
收稿日期 2019/9/4
修改稿日期
网络出版日期
作者单位点击查看
备注丁松(1988-),男,本科,工程师,主要从事核电站设备无损检测技术研究和应用工作
引用该论文: DING Song,ZHOU Fan,LIN Baitao,CHEN Fei,LU Wei. Phased array ultrasonic testing for the same steel welds in the safe-end of pressure vessels in nuclear power plants[J]. Nondestructive Testing, 2020, 42(6): 41~46
丁松,周帆,林百涛,陈飞,卢威. 核电站压力容器接管安全端同种钢焊缝的相控阵超声检测[J]. 无损检测, 2020, 42(6): 41~46
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】陈怀东,肖学柱,李明, 等.核电站安全端异种金属焊缝超声检查技术[J].无损检测,2009,31(11):862-867.
【2】张小龙,张子健,吴家喜,等.奥氏体不锈钢厚壁对接焊缝的超声相控阵CIVA仿真与试验[J].无损检测,2018,40(9):36-40,57.
【3】林莉,杨平华,张东辉, 等.厚壁铸造奥氏体不锈钢管道焊缝超声相控阵检测技术概述[J].机械工程学报,2012,48(4):12-20.
【4】何海,周礼峰,蔡家藩, 等.奥氏体不锈钢接管管嘴焊缝内表面超声检验探头研制[J].无损探伤,2017,41(2):25-29.
【5】尹芹.反应堆压力容器接管-安全端异种钢焊缝直射纵波超声检测方法[J].无损检测,2010,32(3):179-183.
【6】邓黎,李一.三代核电反应堆压力容器进/出口接管安全端相控阵检测[J].无损探伤,2016,40(3):36-38.
【7】卢威,刘云,丁松, 等.核反应堆压力容器接管安全端异种金属焊缝自动超声检测技术[J].压力容器,2017,34(1):56-61.
【8】谢航,张益成,周礼峰, 等.奥氏体不锈钢管道环焊缝的超声相控阵检测[J].无损检测,2017,39(3):23-25,29.
【2】张小龙,张子健,吴家喜,等.奥氏体不锈钢厚壁对接焊缝的超声相控阵CIVA仿真与试验[J].无损检测,2018,40(9):36-40,57.
【3】林莉,杨平华,张东辉, 等.厚壁铸造奥氏体不锈钢管道焊缝超声相控阵检测技术概述[J].机械工程学报,2012,48(4):12-20.
【4】何海,周礼峰,蔡家藩, 等.奥氏体不锈钢接管管嘴焊缝内表面超声检验探头研制[J].无损探伤,2017,41(2):25-29.
【5】尹芹.反应堆压力容器接管-安全端异种钢焊缝直射纵波超声检测方法[J].无损检测,2010,32(3):179-183.
【6】邓黎,李一.三代核电反应堆压力容器进/出口接管安全端相控阵检测[J].无损探伤,2016,40(3):36-38.
【7】卢威,刘云,丁松, 等.核反应堆压力容器接管安全端异种金属焊缝自动超声检测技术[J].压力容器,2017,34(1):56-61.
【8】谢航,张益成,周礼峰, 等.奥氏体不锈钢管道环焊缝的超声相控阵检测[J].无损检测,2017,39(3):23-25,29.
相关信息