Cause Analysis on Fracture of 316L Stainless Steel Strainer Screen
摘 要
某汽车变速箱316L不锈钢过滤网在服役期间出现多处断裂。通过宏观分析、断口分析、金相检验及成分分析、微观分析等方法对过滤网的断裂原因进行了分析。结果表明:该316L不锈钢过滤网的断裂模式为疲劳断裂。网丝在拉拔工艺中表面产生了分层、划痕及其近表面的硬质夹杂颗粒等缺陷,集成制网时在网丝交叉处产生了加工硬化,在二者的共同作用下导致过滤网发生疲劳断裂。
Abstract
The 316L stainless steel strainer screen of an automobile gearbox fractured in several places during its service. The fracture causes of the strainer screen were analyzed by means of macro analysis, fracture analysis, metallographic examination, composition analysis and micro analysis. The results show that the fracture mode of the 316L stainless steel strainer screen was fatigue fracture. During the drawing process, there were some defects on the surface of wire, such as delamination, scratch and hard inclusion particles near the surface. Work hardening occurred at the intersection of wire mesh during integrated mesh making. Under the joint action of the both sides, the strainer screen occurred fatigue fracture.
中图分类号 TG115.2 DOI 10.11973/lhjy-wl202008013
所属栏目 质量控制与失效分析
基金项目
收稿日期 2019/9/3
修改稿日期
网络出版日期
作者单位点击查看
备注于凤云(1980-),女,工程师,主要从事金属材料微结构测试分析工作
引用该论文: YU Fengyun,LI Chunyan,ZHAO Yue,ZOU Longjiang,WANG Weiqiang. Cause Analysis on Fracture of 316L Stainless Steel Strainer Screen[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2020, 56(8): 54~58
于凤云,李春艳,赵悦,邹龙江,王伟强. 316L不锈钢过滤网断裂原因分析[J]. 理化检验-物理分册, 2020, 56(8): 54~58
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】郜可峰,张祥平,刘芳.汽车自动变速箱过滤系统设计方法与试验研究[J].汽车零部件,2014(3):37-40.
【2】李开放.自动变速箱油滤器基本过滤性能试验方法改进研究[J].汽车零部件,2018(10):87-89.
【3】王荣.机械装备的失效分析(续前)第3讲断口分析技术(上)[J].理化检验(物理分册),2016,52(10):698-704.
【4】王荣.机械装备的失效分析(续前)第8讲失效诊断与预防技术(1)[J].理化检验(物理分册),2017,53(12):849-858.
【5】王荣.机械装备的失效分析(续前)第8讲失效诊断与预防技术(4)[J].理化检验(物理分册),2018,54(6):402-462.
【6】孟耀青,郑永瑞,赵昊乾.汽车用弹簧钢线材夹杂物的控制[J].钢铁研究学报,2015,27(8):1-6.
【2】李开放.自动变速箱油滤器基本过滤性能试验方法改进研究[J].汽车零部件,2018(10):87-89.
【3】王荣.机械装备的失效分析(续前)第3讲断口分析技术(上)[J].理化检验(物理分册),2016,52(10):698-704.
【4】王荣.机械装备的失效分析(续前)第8讲失效诊断与预防技术(1)[J].理化检验(物理分册),2017,53(12):849-858.
【5】王荣.机械装备的失效分析(续前)第8讲失效诊断与预防技术(4)[J].理化检验(物理分册),2018,54(6):402-462.
【6】孟耀青,郑永瑞,赵昊乾.汽车用弹簧钢线材夹杂物的控制[J].钢铁研究学报,2015,27(8):1-6.
相关信息