High-frequency ultrasonic testing of welding quality of laminate porous plate
摘 要
介绍了高频超声C扫描检测技术在多孔层板焊接质量检测中的应用。通过分析多孔层板内部结构,结合超声脉冲反射法传播特性,采用高频、小焦点聚焦探头,获得了更高的横向分辨率,实现了多孔层板焊接质量的有效评估。开展多孔层板构件的高分辨率超声C扫描检测,对焊接面进行高分辨率自动化扫描,达到了检测微小缺陷的目的。试验结果表明,所提出的高频超声检测工艺方法可行有效,可应用于多孔层板类构件焊接质量的自动化检测中。
Abstract
This paper introduces the application of high-frequency ultrasonic C-scan detection technique in detecting the laminated porous plate. Considering about the internal structure of the porous laminated plate and the propagation characteristics of the ultrasonic pulse reflection method, a high-frequency, small-focus focusing probe is used to obtain higher lateral resolution, and an effective evaluation of the quality of the porous laminate is achieved. Aiming at detecting smaller defects, high-resolution automated C-scanning of the welded surface of laminate porous plate is performed. It is shown that the proposed high-frequency ultrasonic testing technique is feasible and effective, and it provides an important technical means for the automatic detection of welding quality of such components.
中图分类号 TG115.28 DOI 10.11973/wsjc202008003
所属栏目 试验研究
基金项目
收稿日期 2019/12/22
修改稿日期
网络出版日期
作者单位点击查看
备注付鑫(1988-),男,工程师,硕士,主要从事航空制造领域无损检测与评价技术研究工作
引用该论文: FU Xin,XIE Kaiwen,ZHANG Chao,XIA Meiling. High-frequency ultrasonic testing of welding quality of laminate porous plate[J]. Nondestructive Testing, 2020, 42(8): 15~19
付鑫,谢凯文,张超,夏美玲. 多孔层板焊接质量的高频超声检测[J]. 无损检测, 2020, 42(8): 15~19
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】吴海玲, 彭晓峰,陶涛,等. 多孔多层板发散冷却特性(一)直通道[J]. 航空发动机,2004,30(1):19-22.
【2】任加万, 谭永华. 冲压发动机燃烧室热防护技术[J]. 火箭推进,2006,32(4):38-42,47.
【3】董威, 韩树军,曹玉璋. 多孔层板换热特性实验研究[J]. 航空动力学报,2002,17(1):122-126.
【4】桂忠楼, 张鑫华,钟振纲,等. 高效冷却单晶涡轮叶片制造技术的发展[J]. 航空制造工程,1998(2):11-13.
【5】孔庆吉, 曲伸,邵天巍,等. 钎焊及扩散焊技术在航空发动机制造中的应用与发展[J]. 航空制造技术,2010(24):82-84.
【2】任加万, 谭永华. 冲压发动机燃烧室热防护技术[J]. 火箭推进,2006,32(4):38-42,47.
【3】董威, 韩树军,曹玉璋. 多孔层板换热特性实验研究[J]. 航空动力学报,2002,17(1):122-126.
【4】桂忠楼, 张鑫华,钟振纲,等. 高效冷却单晶涡轮叶片制造技术的发展[J]. 航空制造工程,1998(2):11-13.
【5】孔庆吉, 曲伸,邵天巍,等. 钎焊及扩散焊技术在航空发动机制造中的应用与发展[J]. 航空制造技术,2010(24):82-84.
相关信息