Influence of Welding Simulation Parameters on Welding Thermal Simulation Test Results of Q960EQP Steel
摘 要
使用Gleeble3800热模拟试验机,研究了焊接模拟参数对Q960EQP钢焊接热模拟试验结果的影响。结果表明:预热温度、峰值温度、焊接线能量和板厚参数是影响焊接热模拟试验结果的主要参数;峰值温度保温时间对试样的冲击性能有一定的影响,但不改变热模拟试验后的试样显微组织类型;升温速度对试样的力学性能和显微组织影响很小;试样跨度影响试样的极限冷却速度,进行快速冷却试验时,对试验结果影响很大。
Abstract
The influence of welding simulation parameters on the welding thermal simulation test results of Q960EQP steel was studied by using Gleeble3800 thermal simulation test machine. The results show that preheating temperature, peak temperature, welding line energy and plate thickness parameter were the main parameters that affect the results of welding thermal simulation test. The peak temperature holding time had a certain influence on the impact performance of the sample, but did not change the microstructure type of the sample after thermal simulation test. The heating rate had little affect on the mechanical properties and microstructure of the sample. The sample span affect the ultimate cooling speed of the sample, and it had a great influence on the test results when the rapid cooling test was carried out.
中图分类号 TG441 DOI 10.11973/lhjy-wl202010002
所属栏目 试验与研究
基金项目
收稿日期 2019/10/25
修改稿日期
网络出版日期
作者单位点击查看
备注许峻峰(1987-),男,工程师,主要从事钢铁材料的标准研究工作,xujunfeng@njsteel.com.cn
引用该论文: XU Junfeng,QIN Xiangdou,LI Jianbin. Influence of Welding Simulation Parameters on Welding Thermal Simulation Test Results of Q960EQP Steel[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2020, 56(10): 5~11
许峻峰,钦祥斗,李建宾. 焊接模拟参数对Q960EQP钢焊接热模拟试验结果的影响[J]. 理化检验-物理分册, 2020, 56(10): 5~11
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】赵敏,孙长伟,杜则裕.焊接热模拟技术及其应用[J].焊接技术,1999,8(4):41-42.
【2】贾元伟. 2507双相不锈钢模拟焊接热影响区的组织与性能[J].理化检验(物理分册),2014,50(6):417-420.
【3】王宗杰.焊接工程综合试验技术[M].北京:机械工业出版社,1997.
【4】李登辉,骆传中,谷建军.Q890钢焊接热模拟研究[J].焊接技术,201342(8):9-11.
【5】牛济泰.材料和热加工领域的物理模拟技术[M]. 国防工业出版社,2017.
【6】刘恒,高慧临.焊接预热温度对X80级管线钢组织性能的影响[J].焊管,2007,30(3):27-29.
【2】贾元伟. 2507双相不锈钢模拟焊接热影响区的组织与性能[J].理化检验(物理分册),2014,50(6):417-420.
【3】王宗杰.焊接工程综合试验技术[M].北京:机械工业出版社,1997.
【4】李登辉,骆传中,谷建军.Q890钢焊接热模拟研究[J].焊接技术,201342(8):9-11.
【5】牛济泰.材料和热加工领域的物理模拟技术[M]. 国防工业出版社,2017.
【6】刘恒,高慧临.焊接预热温度对X80级管线钢组织性能的影响[J].焊管,2007,30(3):27-29.
相关信息