Application of Domestic Automatic Sample Preparation Equipment in Metallographic Sample Preparation
摘 要
采用国产自动化金相制样设备对球墨铸铁、碳钢、白口铁、离心浇注巴氏合金等材料进行了金相制样。结果表明:采用自动程序控制的金相制样设备制备出的金相试样具有良好的质量,制备速度快,能满足企业批量制样需求,工作效率高。
Abstract
The metallographic samples of nodular cast iron, carbon steel, white cast iron, centrifugal casting Babbitt alloy and other materials were prepared by domestic automatic metallographic sample preparation equipment. The results show that the metallographic samples prepared by the metallographic sample preparation equipment controlled by the automatic program had good quality and rapid preparation speed. Which can met the needs of mass sample preparation of enterprises, and had high work efficiency.
中图分类号 TG115.2 DOI 10.11973/lhjy-wl202012002
所属栏目 专题报道(理化检验试验室建设)
基金项目
收稿日期 2020/8/27
修改稿日期
网络出版日期
作者单位点击查看
备注卫志清(1982-),男,工程师,主要从事金相制样设备及硬度计的开发与研究工作,hippowiwi@126.com
引用该论文: WEI Zhiqing,LI Shengzhi,WANG Cheng,CHEN Qiulong,LIU Ying,LONG Hesun,LE Jintao. Application of Domestic Automatic Sample Preparation Equipment in Metallographic Sample Preparation[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2020, 56(12): 5~10
卫志清,李生志,王成,陈秋龙,刘莹,龙荷荪,乐金涛. 国产自动化制样设备在金相制样中的应用[J]. 理化检验-物理分册, 2020, 56(12): 5~10
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】乐金涛. 我国硬度计制造行业的发展现状及方向[J].理化检验(物理分册),2017,53(6):379-381.
【2】金再柯,乐金涛.钢铁企业成品性能检测流程自动化建设工作思考与探索[J].理化检验(物理分册),2018,54(12):857-862.
【2】金再柯,乐金涛.钢铁企业成品性能检测流程自动化建设工作思考与探索[J].理化检验(物理分册),2018,54(12):857-862.
相关信息