Corrosion Problems and Protective Measures of FCC Wet Flue Gas Desulfurization Device
摘 要
近年来,中国石化多家炼化企业的催化裂化烟气湿法脱硫装置出现了严重的腐蚀问题,为减轻设备腐蚀、保证装置安全稳定长周期运行,对多套催化裂化烟气湿法脱硫装置进行腐蚀调查,针对不同腐蚀区域设备、塔器及内构件的实际腐蚀问题进行了系统分析,结合装置现场腐蚀挂片和实验室腐蚀评价研究,从材料选择、工艺和施工质量控制三方面提出防护对策。结果表明:催化裂化烟气湿法脱硫装置存在五个不同的腐蚀环境,需根据不同区域的腐蚀特性,选择合适的防腐蚀材料;湿法脱硫系统设备易发生腐蚀的部位主要为塔器、烟囱、塔内构件和泵叶轮等。
Abstract
The catalytic cracking flue gas wet desulfurization units of several Sinopec's petrochemical enterprises experienced serious corrosion problems in recent years. In order to reduce equipment corrosion and make it operate long term and properly, the corrosion of several sets of catalytic cracking flue gas wet desulfurization equipment was investigated, and the actual corrosion problems of equipment, towers and internal components in different corrosion areas were systematically analyzed. Combined with the results of the on site corrosion coupon testing and laboratory corrosion evaluation research, protective countermeasures were proposed from three aspects: material selection, process and construction quality control. The results show that there were five different corrosive environments in the FCC wet flue gas desulfurization device, and it was necessary to select suitable anti-corrosion materials according to the corrosion characteristics of different areas. The corrosion-prone parts of wet desulfurization system equipment were mainly towers, chimneys, tower internals and pump impellers.
中图分类号 TG174 DOI 10.11973/fsyfh-202101015
所属栏目 应用技术
基金项目 中国石化集团科技开发项目(315018)
收稿日期 2018/12/15
修改稿日期
网络出版日期
作者单位点击查看
引用该论文: XU Lanfei,LIU Xiwu,CUI Xinan. Corrosion Problems and Protective Measures of FCC Wet Flue Gas Desulfurization Device[J]. Corrosion & Protection, 2021, 42(1): 73
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】李海. 催化裂化装置再生烟气污染物净化方案研究[D]. 上海:华东理工大学,2014.
【2】任刚. 催化装置脱硫脱硝设备运行问题及对策[J]. 石油化工设备技术,2016,37(2):62-66.
【3】吕伟. 催化裂化烟气湿法脱硫装置设备腐蚀现状分析及对策[J]. 石油化工腐蚀与防护,2018,35(1):23-28.
【4】徐锐. 大型石灰石-石膏湿法烟气脱硫系统可靠性研究[D]. 武汉:华中科技大学,2011.
【5】欧阳明辉,刘焕安,叶际宣. 燃煤电厂烟气脱硫湿烟囱特种不锈钢防腐内衬[J]. 华电技术,2014,36(5):66-71.
【6】周至祥. 烟气脱硫常用金属耐腐蚀性能比较和选材[J]. 上海电力,2006(5):459-465.
【7】MARSHALL P I,GOOCH T G. Effect of composition on corrosion resistance of high-alloy austenitic stainless steel weld metals[J]. Corrosion,1986,49(6):514-526.
【8】NACE,RP0199-2004. Installation of stainless chromium-nickel steeland nickel-alloy roll-bonded and explosion-bonded clad plate in air pollution control equipment[S].
【9】赵毅,沈艳梅. 湿式石灰石/石膏法烟气脱硫系统的防腐蚀措施[J]. 腐蚀与防护,2009,30(7):495-498.
【10】陶涛. 催化裂化氨法烟气脱硫脱硝除尘装置腐蚀状况分析[J]. 山东化工,2015,44(23):147-148.
【11】梁平,杜翠薇,李晓刚. SO42-对X80管线钢在含Cl-的NaHCO3溶液中点蚀行为影响[J]. 腐蚀与防护,2010,31(5):362-364.
【12】LEE W J,PYUN S I. Effects of sulphate ion additives on the pitting corrosion of pure aluminum in 0.01 M NaCl solution[J]. Electrochimica Acta,2000,45(12):1901-1910.
【13】MOAYED M H,NEWMAN R C. Aggressive effects of pitting "inhibitors" on highly alloyed stainless steels[J]. Corrosion Science,1998,40(2/3):519-522.
【14】廖家兴,蒋益明,吴玮巍,等. 含Cl-溶液SO42-对316不锈钢临界点蚀温度的影响[J]. 金属学报,2006,42(11):1187-1190.
【15】张小龙,黎建明,邱正秋,等. 316L不锈钢在有机胺脱硫溶液中的耐蚀性[J]. 腐蚀与防护,2014,35(5):492-494.
【16】时瑞生. 湿法烟气脱硫系统的腐蚀原因及防腐材料的选择[J]. 有色冶金节能,2008,24(3):61-64.
【17】喻舒,李小宇,朱跃. 烟气脱硫装置的腐蚀与防护[J]. 锅炉制造,2006(1):36-38.
【18】王宗满. 湿法烟气脱硫系统防腐设计[J]. 中国科技信息,2009(9):156-157.
【19】陈忠基,曹丰. 催化裂化装置烟气洗涤塔腐蚀原因分析[J]. 石油化工腐蚀与防护,2014,31(6):25-29.
【20】李宝顺,赵丽丽,周驰,等. 湿法烟气脱硫装置的腐蚀与防护[J]. 化工机械,2009,36(6):640-643.
【21】潘全旺. FCC湿法烟气脱硫装置运行问题及对策[J]. 炼油技术与工程,2013,43(7):12-16.
【22】张启玖,秦国伟,刘更顺,等. 有机胺脱硫胺液硫代硫酸根超标原因分析及处理方案[J]. 能源与环境,2014(6):80-81.
【23】王晓东,侯锐钢. 玻璃鳞片涂料的应用[J]. 热固性树脂,2005,20(1):47-49.
【24】赵凯. 玻璃鳞片树脂和橡胶衬里在湿法脱硫吸收塔上的应用[J]. 有色设备,2008(6):30-32.
【25】陶卫君,朱焱松,任恒昌,等. 氨法烟气脱硫装置腐蚀与防护[J]. 腐蚀与防护,2013,34(5):436-439.
【2】任刚. 催化装置脱硫脱硝设备运行问题及对策[J]. 石油化工设备技术,2016,37(2):62-66.
【3】吕伟. 催化裂化烟气湿法脱硫装置设备腐蚀现状分析及对策[J]. 石油化工腐蚀与防护,2018,35(1):23-28.
【4】徐锐. 大型石灰石-石膏湿法烟气脱硫系统可靠性研究[D]. 武汉:华中科技大学,2011.
【5】欧阳明辉,刘焕安,叶际宣. 燃煤电厂烟气脱硫湿烟囱特种不锈钢防腐内衬[J]. 华电技术,2014,36(5):66-71.
【6】周至祥. 烟气脱硫常用金属耐腐蚀性能比较和选材[J]. 上海电力,2006(5):459-465.
【7】MARSHALL P I,GOOCH T G. Effect of composition on corrosion resistance of high-alloy austenitic stainless steel weld metals[J]. Corrosion,1986,49(6):514-526.
【8】NACE,RP0199-2004. Installation of stainless chromium-nickel steeland nickel-alloy roll-bonded and explosion-bonded clad plate in air pollution control equipment[S].
【9】赵毅,沈艳梅. 湿式石灰石/石膏法烟气脱硫系统的防腐蚀措施[J]. 腐蚀与防护,2009,30(7):495-498.
【10】陶涛. 催化裂化氨法烟气脱硫脱硝除尘装置腐蚀状况分析[J]. 山东化工,2015,44(23):147-148.
【11】梁平,杜翠薇,李晓刚. SO42-对X80管线钢在含Cl-的NaHCO3溶液中点蚀行为影响[J]. 腐蚀与防护,2010,31(5):362-364.
【12】LEE W J,PYUN S I. Effects of sulphate ion additives on the pitting corrosion of pure aluminum in 0.01 M NaCl solution[J]. Electrochimica Acta,2000,45(12):1901-1910.
【13】MOAYED M H,NEWMAN R C. Aggressive effects of pitting "inhibitors" on highly alloyed stainless steels[J]. Corrosion Science,1998,40(2/3):519-522.
【14】廖家兴,蒋益明,吴玮巍,等. 含Cl-溶液SO42-对316不锈钢临界点蚀温度的影响[J]. 金属学报,2006,42(11):1187-1190.
【15】张小龙,黎建明,邱正秋,等. 316L不锈钢在有机胺脱硫溶液中的耐蚀性[J]. 腐蚀与防护,2014,35(5):492-494.
【16】时瑞生. 湿法烟气脱硫系统的腐蚀原因及防腐材料的选择[J]. 有色冶金节能,2008,24(3):61-64.
【17】喻舒,李小宇,朱跃. 烟气脱硫装置的腐蚀与防护[J]. 锅炉制造,2006(1):36-38.
【18】王宗满. 湿法烟气脱硫系统防腐设计[J]. 中国科技信息,2009(9):156-157.
【19】陈忠基,曹丰. 催化裂化装置烟气洗涤塔腐蚀原因分析[J]. 石油化工腐蚀与防护,2014,31(6):25-29.
【20】李宝顺,赵丽丽,周驰,等. 湿法烟气脱硫装置的腐蚀与防护[J]. 化工机械,2009,36(6):640-643.
【21】潘全旺. FCC湿法烟气脱硫装置运行问题及对策[J]. 炼油技术与工程,2013,43(7):12-16.
【22】张启玖,秦国伟,刘更顺,等. 有机胺脱硫胺液硫代硫酸根超标原因分析及处理方案[J]. 能源与环境,2014(6):80-81.
【23】王晓东,侯锐钢. 玻璃鳞片涂料的应用[J]. 热固性树脂,2005,20(1):47-49.
【24】赵凯. 玻璃鳞片树脂和橡胶衬里在湿法脱硫吸收塔上的应用[J]. 有色设备,2008(6):30-32.
【25】陶卫君,朱焱松,任恒昌,等. 氨法烟气脱硫装置腐蚀与防护[J]. 腐蚀与防护,2013,34(5):436-439.
相关信息