船舶维修与再制造用Mo2NiB2基金属陶瓷及涂层的制备和研究现状
Preparation and Research Status of Mo2NiB2-Based Cermet and Coating forMaintenance and Remanufacture of Ships
摘 要
在海洋高盐、高湿、磨损及循环载荷冲击的恶劣环境中，船舶关键零部件易发生腐蚀、磨损和疲劳失效，因此零部件需要进行维修与再制造，如通过焊接或激光熔覆等方法在表面制备一层耐腐耐磨涂层。Mo2NiB2基金属陶瓷因具有高硬度，优良的耐磨、耐蚀、耐高温氧化等性能而成为维修与再制造用涂层材料。简要描述了数值模拟在Mo2NiB2基金属陶瓷研究中的应用，详细介绍了Mo2NiB2基金属陶瓷或涂层的制备工艺以及不同工艺参数对材料组织和性能的影响，指出激光熔覆原位合成结合数值模拟是未来Mo2NiB2基金属陶瓷主要的研究方向。
数值模拟
制备方法
再制造
Mo2NiB2 cermet
numerical simulation
preparation method
remanufacture
Abstract
In the severe marine environment of high salts, high humidity, wear and impact of cyclic loads, the key parts of ships are prone to corrosion, wear and fatigue failure. Therefore, the surface of the parts needs to be repaired and remanufactured, such as welding or laser cladding corrosion-resistant and wear-resistant layers on the surface. Mo2NiB2-based cermets have become coating materials for maintenance and remanufacturing due to their high hardness, excellent wear resistance and corrosion resistance, and high temperature oxidation resistance. The application of numerical simulation in research of Mo2NiB2-based cermets is summarized. The preparation processes of Mo2NiB2-based cermets or coatings, as well as the effects of different process parameters on the microstructure and performance of the materials are described in details. It is pointed out that the laser cladding in-situ synthesis technique combined with numerical simulation is the main research direction of Mo2NiB2-based cermets in the future.
中图分类号 TG148 DOI 10.11973/jxgccl202105002
所属栏目 综述
基金项目 国家自然科学基金资助项目（51572168；52002242）
收稿日期 2021/3/5
修改稿日期 2021/4/9
网络出版日期
作者单位点击查看
备注倪晓杰(1982-),男,浙江绍兴人,高级工程师,博士
引用该论文: NI Xiaojie,KAI Jiawei,YIN Li,ZHAO Zhongxian,ZHAO Yuantao,WANG Shengze,HU Zhaowei,LI Wenge. Preparation and Research Status of Mo2NiB2-Based Cermet and Coating forMaintenance and Remanufacture of Ships[J]. Materials for mechancial engineering, 2021, 45(5): 8～14
倪晓杰,开佳伟,尹莉,赵忠贤,赵远涛,王生泽,胡肇炜,李文戈. 船舶维修与再制造用Mo2NiB2基金属陶瓷及涂层的制备和研究现状[J]. 机械工程材料, 2021, 45(5): 8～14
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王秋红.高性能Mo2FeB2基金属陶瓷制备技术及断裂韧性的研究[D].南京:南京航空航天大学,2011. WANG Q H.Research on the manufacturing technology and fracturetoughness of Mo2FeB2-based cermets with high mechanical properties[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2011.
【2】李玉柱.三元硼化物Mo2FeB2基金属陶瓷的制备及其性能研究[D].包头:内蒙古科技大学,2010. LI Y Z.The preparation and properties of ternary boride Mo2FeB2 based cermets[D].Baotou:Inner Mongolia University of Science & Technology,2010.
【3】徐金龙.新型高性能Mo2FeB2基金属陶瓷的制备及性能研究[D].武汉:武汉科技大学,2006. XU J L.The study development and properties of ternary boride base cermets[D].Wuhan:Wuhan University of Science and Technology,2006.
【4】刘福田,李兆前,黄传真,等.三元硼化物基金属陶瓷覆层性能的研究[J].机械工程材料,2003,27(7):30-34. LIU F T,LI Z Q,HUANG C Z,et al.The properties of ternary boride based cermet cladding material[J].Materials for Mechanical Engineering,2003,27(7):30-34.
【5】TAKAGI K I,YAMASAKI Y,KOMAI M.High-strength boride base hard materials[J].Journal of Solid State Chemistry,1997,133(1):243-248.
【6】YAMASAKI Y,NAKANO K,TAKAGI K I,et al.Effect of W content on the properties and structure of Cr-containing Mo2NiB2 hard alloys[J].Journal of the Japan Society of Powder and Powder Metallurgy,1996,43(4):498-503.
【7】TAKAGI K I.Development of high strength complex boride base hard materials produced by reaction boronizing sintering[J].Journal of the Japan Society of Powder and Powder Metallurgy,1998,45(6):507-514.
【8】胡肇炜,李文戈.激光熔覆原位合成大面积Mo2NiB2涂层组织及温度场分析[C]//第十一次全国热处理大会论文集.太原:中国机械工程学会,2015:841. HU Z W, LI W G. Microstructure and temperature field analysis of in situ synthesized large area Mo2NiB2 coating by laser cladding[C]//Proceedings of the 11th National Heat Treatment Conference. Taiyuan:Chinese Mechanical Engineering Society, 2015:841.
【9】HU Z W, HONG L, WU G. Numerical simulation of curved surface of gear in laser cladding[C]//High-Power Lasers and Applications V. Shanghai:International Society for Optics and Photonics, 2010:78430T.
【10】李金明.合金化Mo2NiB2结构及力学性能的第一性原理研究[D].湘潭:湘潭大学,2018. LI J M.First-principles study on the structure and mechanical properties of alloyed Mo2NiB2[D].Xiangtan:Xiangtan University,2018.
【11】胡肇炜,李文戈.Mo-Ni-B系三元硼化物制备与性能研究评述[J].表面技术,2016,45(11):1-9. HU Z W,LI W G.Research review of Mo-Ni-B ternary boride preparation and properties[J].Surface Technology,2016,45(11):1-9.
【12】谢浪.反应硼化烧结法制备Mo2NiB2基金属陶瓷的研究[D].湘潭:湘潭大学,2015. XIE L.Study of Mo2NiB2 based cermets produced by reaction boronizing sintering method[D].Xiangtan:Xiangtan University,2015.
【13】李文虎,张良,艾桃桃,等.W对Mo2NiB2金属陶瓷微观结构和性能的影响[J].人工晶体学报,2019,48(6):1089-1093. LI W H,ZHANG L,AI T T,et al.Influence of W on microstructure and properties of Mo2NiB2 cermet[J].Journal of Synthetic Crystals,2019,48(6):1089-1093.
【14】中島健太, 小池渉, 藤間卓也, 等. Cr含有Mo2NiB2三元硼化物の機械的及び物理的特性[J]. 粉体および粉末冶金, 2012, 59(8):473-478. NAKAJIMA K, KOIKE W, FUJIMA T, et al. Mechanical and physical properties of Cr-containing Mo2NiB2 ternary boride[J].Journal of the Japan Society of Powder and Powder Metallurgy, 2012, 59(8):473-478.
【15】西麻里, 山裕司, 高木研一. Mnを添加したMo2NiB2型複硼化物系サーメットの焼結挙動[J]. 日本金属学会誌, 2001, 65(9):775-778. NISHI M, YAMASAKI Y, TAKAGI K. Sintering behavior of Mo2NiB2 type compound cermet with Mn addition[J].Journal of the Japan Institute of Metals and Materials, 2001, 65(9):775-778.
【16】李文虎,周佩德,艾桃桃,等.La2O3含量对Mo2NiB2金属陶瓷微观组织及断裂性能的影响[J].材料热处理学报,2019,40(7):77-81. LI W H,ZHOU P D,AI T T,et al.Effect of La2O3 content on microstructure and fracture properties of Mo2NiB2 cermet[J].Transactions of Materials and Heat Treatment,2019,40(7):77-81.
【17】周佩德,李文虎,艾桃桃,等.纳米La2O3掺杂Mo2NiB2基金属陶瓷的摩擦磨损特性研究[J].稀有金属与硬质合金,2019,47(2):10-14. ZHOU P D,LI W H,AI T T,et al.Research on friction and wear behavior of nano-La2O3 doped Mo2NiB2 -based cermets[J].Rare Metals and Cemented Carbides,2019,47(2):10-14.
【18】周佩德.La2O3掺杂Mo2NiB2基金属陶瓷组织与性能的研究[D].汉中:陕西理工大学,2020. ZHOU P D.Microstructure and properties of La2O3 doped with Mo2NiB2 based cermets[D].Hanzhong:Shaanxi University of Technology,2020.
【19】杨林,潘应君,柯德庆,等.稀土Sm2O3对Mo2NiB2基金属陶瓷微观组织和力学性能的影响[J].武汉科技大学学报,2017,40(2):105-109. YANG L,PAN Y J,KE D Q,et al.Effect of rare earth Sm2O3 on microstructure and mechanical properties of Mo2NiB2 based cermets[J].Journal of Wuhan University of Science and Technology,2017,40(2):105-109.
【20】潘颖慧,潘应君,柯德庆,等.Si3N4晶须对原位形成Mo2NiB2金属陶瓷组织与性能的影响[J].材料热处理学报,2020,41(10):111-116. PAN Y H,PAN Y J,KE D Q,et al.Effect of Si3N4 whiskers on microstructure and properties of in situ prepared Mo2NiB2 cermet[J].Transactions of Materials and Heat Treatment,2020,41(10):111-116.
【21】ZHANG L,HUANG Z F,LIU Y Z,et al.Effects of mechanical ball milling time on the microstructure and mechanical properties of Mo2NiB2-Ni cermets[J].Materials,2019,12(12):1926.
【22】ZHANG L,HUANG Z F,LIU Y Z,et al.Effect of Ni content on the microstructure,mechanical properties and erosive wear of Mo2NiB2-Ni cermets[J].Ceramics International,2019,45(16):19695-19703.
【23】ZHANG L,HUANG Z F,SHEN Y P,et al.High-temperature compressive properties and tribological behaviour of Mo2NiB2-Ni cermets[J].Ceramics International,2019,45(15):18413-18421.
【24】张恒.Mo2NiB2基金属陶瓷的制备及其组织性能研究[D].武汉:武汉科技大学,2016. ZHANG H.Research of preparation and structure properties of Mo2NiB2 based cermet[D].Wuhan:Wuhan University of Science and Technology,2016.
【25】TAKAGI K I.Development and application of high strength ternary boride base cermets[J].Journal of Solid State Chemistry,2006,179(9):2809-2818.
【26】TAKAGI K I,KOIKE W,MOMOZAWA A,et al.Effects of Cr on the properties of Mo2NiB2 ternary boride[J].Solid State Sciences,2012,14(11/12):1643-1647.
【27】胡肇炜,李文戈,吴钱林.激光熔覆原位合成Mo-Ni-B陶瓷涂层工艺及性能研究[C]//上海市激光学会2015年学术年会论文集.上海:上海市激光学会,2015:191-194. HU Z W, LI W G, WU Q L. Research on the process and performance of in-situ synthesis of Mo-Ni-B ceramic coating by laser cladding[C]//Proceedings of the 2015 Academic Conference of Shanghai Laser Society. Shanghai:Shanghai Laser Society,2015:191-194.
【28】张津超,石世宏,龚燕琪,等.激光熔覆技术研究进展[J].表面技术,2020,49(10):1-11. ZHANG J C,SHI S H,GONG Y Q,et al.Research progress of laser cladding technology[J].Surface Technology,2020,49(10):1-11.
【29】徐淑文,陈希章,苏传出,等.工艺参数对激光熔覆层质量的影响[J].热加工工艺,2020,49(22):110-113. XU S W,CHEN X Z,SU C C,et al.Effect of processing parameters on quality of laser cladding layer[J].Hot Working Technology,2020,49(22):110-113.
【30】NI X J,WANG S Z,ZHAO Y T,et al.Investigation on microstructure,hardness,and corrosion resistance of Mo-Ni-B coatings prepared by laser cladding technique[J].Coatings,2019,9(12):856.
【31】WU Q L,LI W G,ZHONG N,et al.Corrosion behavior of laser-clad Mo2NiB2 cermet coating on low carbon steel substrate[J].ISIJ International,2015,55(7):1460-1467.
【32】胡肇炜,李文戈.激光熔覆原位合成Mo2NiB2涂层工艺研究[J].表面技术,2017,46(8):1-6. HU Z W,LI W G.Process research of in situ synthesis of Mo2NiB2 coating by laser cladding[J].Surface Technology,2017,46(8):1-6.
【33】代宽宽,宋光明,吴钱林,等.Mo-Ni-B系三元硼化物陶瓷涂层激光熔覆制备及其腐蚀性能[J].腐蚀与防护,2012,33(5):375-377. DAI K K,SONG G M,WU Q L,et al.Corrosion performance of Mo-Ni-B ternary boride ceramic coating prepared by laser cladding[J].Corrosion & Protection,2012,33(5):375-377.
【34】李志文,刘长松,黄继华,等.基于自蔓延高温合成(SHS)的涂层技术[J].粉末冶金技术,2007,25(2):135-138. LI Z W,LIU C S,HUANG J H,et al.Coating technologies based on self-propagating high-temperature synthesis (SHS)[J].Powder Metallurgy Technology,2007,25(2):135-138.
【35】殷声.燃烧合成[M].北京:冶金工业出版社,1999:1. YIN S.Combustion synthesis[M].Beijing:Metallurgical Industry Press,1999:1.
【36】孙方红,马壮,李福永,等.反应热喷涂制备陶瓷涂层的研究进展[J].材料保护,2013,46(4):48-50. SUN F H,MA Z,LI F Y,et al.Research progress of reactive thermal spraying technique for preparing ceramic coatings[J].Materials Protection,2013,46(4):48-50.
【37】陈枭.超音速火焰喷涂原位制备MoB/NiCr金属陶瓷涂层的组织结构[J].金属热处理,2019,44(9):74-78. CHEN X.Microstructure of MoB/NiCr cermet coating prepared by HVOF in situ[J].Heat Treatment of Metals,2019,44(9):74-78.
【38】董世知,马壮,周鹏,等.球磨对镁合金反应热喷涂陶瓷涂层耐蚀性影响[J].轻金属,2012(11):49-52. DONG S Z,MA Z,ZHOU P,et al.Effects of ball-milling on corrosion-resistance of thermal-spraying method ceramic coating[J].Light Metals,2012(11):49-52.
【39】马壮,邹积峰,李智超.镁合金热化学反应热喷涂Al2O3基复相陶瓷涂层的性能[J].材料保护,2010,43(11):56-58. MA Z,ZOU J F,LI Z C.Properties of alumina-based composite ceramic coating prepared on magnesium alloy surface by thermochemical reaction spraying[J].Materials Protection,2010,43(11):56-58.
【40】SHAHIEN M,YAMADA M,FUKUMOTO M,et al.Reactive plasma-sprayed aluminum nitride-based coating thermal conductivity[J].Journal of Thermal Spray Technology,2015,24(8):1385-1398.
【41】SHAHIEN M,YAMADA M,YASUI T,et al.Reactive plasma nitriding of Al2O3 powder in thermal spray[J].International Journal of Modern Physics:Conference Series,2012,6:546-551.
【42】刘宗德,刘辉,侯世香.原位反应合成Mo-Ni-B系三元硼化物熔覆层的研究[J].金属热处理,2009,34(7):71-75. LIU Z D,LIU H,HOU S X.In-situ synthesis of Mo-Ni-B ternary boride cladding[J].Heat Treatment of Metals,2009,34(7):71-75.
【2】李玉柱.三元硼化物Mo2FeB2基金属陶瓷的制备及其性能研究[D].包头:内蒙古科技大学,2010. LI Y Z.The preparation and properties of ternary boride Mo2FeB2 based cermets[D].Baotou:Inner Mongolia University of Science & Technology,2010.
【3】徐金龙.新型高性能Mo2FeB2基金属陶瓷的制备及性能研究[D].武汉:武汉科技大学,2006. XU J L.The study development and properties of ternary boride base cermets[D].Wuhan:Wuhan University of Science and Technology,2006.
【4】刘福田,李兆前,黄传真,等.三元硼化物基金属陶瓷覆层性能的研究[J].机械工程材料,2003,27(7):30-34. LIU F T,LI Z Q,HUANG C Z,et al.The properties of ternary boride based cermet cladding material[J].Materials for Mechanical Engineering,2003,27(7):30-34.
【5】TAKAGI K I,YAMASAKI Y,KOMAI M.High-strength boride base hard materials[J].Journal of Solid State Chemistry,1997,133(1):243-248.
【6】YAMASAKI Y,NAKANO K,TAKAGI K I,et al.Effect of W content on the properties and structure of Cr-containing Mo2NiB2 hard alloys[J].Journal of the Japan Society of Powder and Powder Metallurgy,1996,43(4):498-503.
【7】TAKAGI K I.Development of high strength complex boride base hard materials produced by reaction boronizing sintering[J].Journal of the Japan Society of Powder and Powder Metallurgy,1998,45(6):507-514.
【8】胡肇炜,李文戈.激光熔覆原位合成大面积Mo2NiB2涂层组织及温度场分析[C]//第十一次全国热处理大会论文集.太原:中国机械工程学会,2015:841. HU Z W, LI W G. Microstructure and temperature field analysis of in situ synthesized large area Mo2NiB2 coating by laser cladding[C]//Proceedings of the 11th National Heat Treatment Conference. Taiyuan:Chinese Mechanical Engineering Society, 2015:841.
【9】HU Z W, HONG L, WU G. Numerical simulation of curved surface of gear in laser cladding[C]//High-Power Lasers and Applications V. Shanghai:International Society for Optics and Photonics, 2010:78430T.
【10】李金明.合金化Mo2NiB2结构及力学性能的第一性原理研究[D].湘潭:湘潭大学,2018. LI J M.First-principles study on the structure and mechanical properties of alloyed Mo2NiB2[D].Xiangtan:Xiangtan University,2018.
【11】胡肇炜,李文戈.Mo-Ni-B系三元硼化物制备与性能研究评述[J].表面技术,2016,45(11):1-9. HU Z W,LI W G.Research review of Mo-Ni-B ternary boride preparation and properties[J].Surface Technology,2016,45(11):1-9.
【12】谢浪.反应硼化烧结法制备Mo2NiB2基金属陶瓷的研究[D].湘潭:湘潭大学,2015. XIE L.Study of Mo2NiB2 based cermets produced by reaction boronizing sintering method[D].Xiangtan:Xiangtan University,2015.
【13】李文虎,张良,艾桃桃,等.W对Mo2NiB2金属陶瓷微观结构和性能的影响[J].人工晶体学报,2019,48(6):1089-1093. LI W H,ZHANG L,AI T T,et al.Influence of W on microstructure and properties of Mo2NiB2 cermet[J].Journal of Synthetic Crystals,2019,48(6):1089-1093.
【14】中島健太, 小池渉, 藤間卓也, 等. Cr含有Mo2NiB2三元硼化物の機械的及び物理的特性[J]. 粉体および粉末冶金, 2012, 59(8):473-478. NAKAJIMA K, KOIKE W, FUJIMA T, et al. Mechanical and physical properties of Cr-containing Mo2NiB2 ternary boride[J].Journal of the Japan Society of Powder and Powder Metallurgy, 2012, 59(8):473-478.
【15】西麻里, 山裕司, 高木研一. Mnを添加したMo2NiB2型複硼化物系サーメットの焼結挙動[J]. 日本金属学会誌, 2001, 65(9):775-778. NISHI M, YAMASAKI Y, TAKAGI K. Sintering behavior of Mo2NiB2 type compound cermet with Mn addition[J].Journal of the Japan Institute of Metals and Materials, 2001, 65(9):775-778.
【16】李文虎,周佩德,艾桃桃,等.La2O3含量对Mo2NiB2金属陶瓷微观组织及断裂性能的影响[J].材料热处理学报,2019,40(7):77-81. LI W H,ZHOU P D,AI T T,et al.Effect of La2O3 content on microstructure and fracture properties of Mo2NiB2 cermet[J].Transactions of Materials and Heat Treatment,2019,40(7):77-81.
【17】周佩德,李文虎,艾桃桃,等.纳米La2O3掺杂Mo2NiB2基金属陶瓷的摩擦磨损特性研究[J].稀有金属与硬质合金,2019,47(2):10-14. ZHOU P D,LI W H,AI T T,et al.Research on friction and wear behavior of nano-La2O3 doped Mo2NiB2 -based cermets[J].Rare Metals and Cemented Carbides,2019,47(2):10-14.
【18】周佩德.La2O3掺杂Mo2NiB2基金属陶瓷组织与性能的研究[D].汉中:陕西理工大学,2020. ZHOU P D.Microstructure and properties of La2O3 doped with Mo2NiB2 based cermets[D].Hanzhong:Shaanxi University of Technology,2020.
【19】杨林,潘应君,柯德庆,等.稀土Sm2O3对Mo2NiB2基金属陶瓷微观组织和力学性能的影响[J].武汉科技大学学报,2017,40(2):105-109. YANG L,PAN Y J,KE D Q,et al.Effect of rare earth Sm2O3 on microstructure and mechanical properties of Mo2NiB2 based cermets[J].Journal of Wuhan University of Science and Technology,2017,40(2):105-109.
【20】潘颖慧,潘应君,柯德庆,等.Si3N4晶须对原位形成Mo2NiB2金属陶瓷组织与性能的影响[J].材料热处理学报,2020,41(10):111-116. PAN Y H,PAN Y J,KE D Q,et al.Effect of Si3N4 whiskers on microstructure and properties of in situ prepared Mo2NiB2 cermet[J].Transactions of Materials and Heat Treatment,2020,41(10):111-116.
【21】ZHANG L,HUANG Z F,LIU Y Z,et al.Effects of mechanical ball milling time on the microstructure and mechanical properties of Mo2NiB2-Ni cermets[J].Materials,2019,12(12):1926.
【22】ZHANG L,HUANG Z F,LIU Y Z,et al.Effect of Ni content on the microstructure,mechanical properties and erosive wear of Mo2NiB2-Ni cermets[J].Ceramics International,2019,45(16):19695-19703.
【23】ZHANG L,HUANG Z F,SHEN Y P,et al.High-temperature compressive properties and tribological behaviour of Mo2NiB2-Ni cermets[J].Ceramics International,2019,45(15):18413-18421.
【24】张恒.Mo2NiB2基金属陶瓷的制备及其组织性能研究[D].武汉:武汉科技大学,2016. ZHANG H.Research of preparation and structure properties of Mo2NiB2 based cermet[D].Wuhan:Wuhan University of Science and Technology,2016.
【25】TAKAGI K I.Development and application of high strength ternary boride base cermets[J].Journal of Solid State Chemistry,2006,179(9):2809-2818.
【26】TAKAGI K I,KOIKE W,MOMOZAWA A,et al.Effects of Cr on the properties of Mo2NiB2 ternary boride[J].Solid State Sciences,2012,14(11/12):1643-1647.
【27】胡肇炜,李文戈,吴钱林.激光熔覆原位合成Mo-Ni-B陶瓷涂层工艺及性能研究[C]//上海市激光学会2015年学术年会论文集.上海:上海市激光学会,2015:191-194. HU Z W, LI W G, WU Q L. Research on the process and performance of in-situ synthesis of Mo-Ni-B ceramic coating by laser cladding[C]//Proceedings of the 2015 Academic Conference of Shanghai Laser Society. Shanghai:Shanghai Laser Society,2015:191-194.
【28】张津超,石世宏,龚燕琪,等.激光熔覆技术研究进展[J].表面技术,2020,49(10):1-11. ZHANG J C,SHI S H,GONG Y Q,et al.Research progress of laser cladding technology[J].Surface Technology,2020,49(10):1-11.
【29】徐淑文,陈希章,苏传出,等.工艺参数对激光熔覆层质量的影响[J].热加工工艺,2020,49(22):110-113. XU S W,CHEN X Z,SU C C,et al.Effect of processing parameters on quality of laser cladding layer[J].Hot Working Technology,2020,49(22):110-113.
【30】NI X J,WANG S Z,ZHAO Y T,et al.Investigation on microstructure,hardness,and corrosion resistance of Mo-Ni-B coatings prepared by laser cladding technique[J].Coatings,2019,9(12):856.
【31】WU Q L,LI W G,ZHONG N,et al.Corrosion behavior of laser-clad Mo2NiB2 cermet coating on low carbon steel substrate[J].ISIJ International,2015,55(7):1460-1467.
【32】胡肇炜,李文戈.激光熔覆原位合成Mo2NiB2涂层工艺研究[J].表面技术,2017,46(8):1-6. HU Z W,LI W G.Process research of in situ synthesis of Mo2NiB2 coating by laser cladding[J].Surface Technology,2017,46(8):1-6.
【33】代宽宽,宋光明,吴钱林,等.Mo-Ni-B系三元硼化物陶瓷涂层激光熔覆制备及其腐蚀性能[J].腐蚀与防护,2012,33(5):375-377. DAI K K,SONG G M,WU Q L,et al.Corrosion performance of Mo-Ni-B ternary boride ceramic coating prepared by laser cladding[J].Corrosion & Protection,2012,33(5):375-377.
【34】李志文,刘长松,黄继华,等.基于自蔓延高温合成(SHS)的涂层技术[J].粉末冶金技术,2007,25(2):135-138. LI Z W,LIU C S,HUANG J H,et al.Coating technologies based on self-propagating high-temperature synthesis (SHS)[J].Powder Metallurgy Technology,2007,25(2):135-138.
【35】殷声.燃烧合成[M].北京:冶金工业出版社,1999:1. YIN S.Combustion synthesis[M].Beijing:Metallurgical Industry Press,1999:1.
【36】孙方红,马壮,李福永,等.反应热喷涂制备陶瓷涂层的研究进展[J].材料保护,2013,46(4):48-50. SUN F H,MA Z,LI F Y,et al.Research progress of reactive thermal spraying technique for preparing ceramic coatings[J].Materials Protection,2013,46(4):48-50.
【37】陈枭.超音速火焰喷涂原位制备MoB/NiCr金属陶瓷涂层的组织结构[J].金属热处理,2019,44(9):74-78. CHEN X.Microstructure of MoB/NiCr cermet coating prepared by HVOF in situ[J].Heat Treatment of Metals,2019,44(9):74-78.
【38】董世知,马壮,周鹏,等.球磨对镁合金反应热喷涂陶瓷涂层耐蚀性影响[J].轻金属,2012(11):49-52. DONG S Z,MA Z,ZHOU P,et al.Effects of ball-milling on corrosion-resistance of thermal-spraying method ceramic coating[J].Light Metals,2012(11):49-52.
【39】马壮,邹积峰,李智超.镁合金热化学反应热喷涂Al2O3基复相陶瓷涂层的性能[J].材料保护,2010,43(11):56-58. MA Z,ZOU J F,LI Z C.Properties of alumina-based composite ceramic coating prepared on magnesium alloy surface by thermochemical reaction spraying[J].Materials Protection,2010,43(11):56-58.
【40】SHAHIEN M,YAMADA M,FUKUMOTO M,et al.Reactive plasma-sprayed aluminum nitride-based coating thermal conductivity[J].Journal of Thermal Spray Technology,2015,24(8):1385-1398.
【41】SHAHIEN M,YAMADA M,YASUI T,et al.Reactive plasma nitriding of Al2O3 powder in thermal spray[J].International Journal of Modern Physics:Conference Series,2012,6:546-551.
【42】刘宗德,刘辉,侯世香.原位反应合成Mo-Ni-B系三元硼化物熔覆层的研究[J].金属热处理,2009,34(7):71-75. LIU Z D,LIU H,HOU S X.In-situ synthesis of Mo-Ni-B ternary boride cladding[J].Heat Treatment of Metals,2009,34(7):71-75.
相关信息
