Cause of Failure in Intergranular Corrosion Test of S32101 Duplex Stainless Steel Welded Joint
摘 要
为探究S32101双相不锈钢焊接后接头晶间腐蚀试验不合格的原因,对晶间腐蚀试验不合格的焊接接头进行了金相检验、X射线光电子能谱(XPS)分析和铁素体含量测试。结果表明:晶间腐蚀试验不合格的原因是材料存在化学成分偏析,造成铬的质量分数偏低,且焊接过程中在晶界处析出碳化铬,形成贫铬区,导致材料的抗晶间腐蚀能力降低。另外,显微组织中的铁素体含量偏低,也增加了贫铬区形成的可能性,进一步降低了抗晶间腐蚀能力。
Abstract
In order to explore the reason of unqualified intergranular corrosion test of S32101 duplex stainless steel welded joint, metallographic examination, X-ray photoelectron spectroscopy (XPS) analysis and ferrite content test were carried out on welded joint which failed in intergranular corrosion test. The results show that the reason for the failure of intergranular corrosion test is that there is chemical composition segregation in the material, resulting in the low content of chromium, and chromium carbide precipitates at the grain boundary during the welding process, forming a chromium poor zone, which leads to the reduction of intergranular corrosion resistance of the material. In addition, the low content of ferrite in the microstructure also increases the possibility of the formation of chromium poor zone and further reduces the resistance to intergranular corrosion.
中图分类号 TG17 DOI 10.11973/lhjy-wl202105004
所属栏目 试验与研究
基金项目
收稿日期 2020/7/3
修改稿日期
网络出版日期
作者单位点击查看
备注唐琴燕(1991-),女,助理工程师,主要从事金属材料理化检验工作,517570736@qq.com
引用该论文: TANG Qinyan,HUANG Minmin,XU Yunwei,LIU Hengji,YE Shangjie,JIANG Siyuan. Cause of Failure in Intergranular Corrosion Test of S32101 Duplex Stainless Steel Welded Joint[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2021, 57(5): 14~17
唐琴燕,黄敏敏,许云伟,刘恒基,叶尚杰,姜思源. S32101双相不锈钢焊接接头晶间腐蚀试验不合格原因[J]. 理化检验-物理分册, 2021, 57(5): 14~17
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】龙茂雄. 世界核电发展现状与展望[N].中国能源报,2019-09-16(11).
【2】王振坤.SAF2205双相不锈钢焊接工艺分析[J].现代盐化工,2020,47(3):65-66.
【3】吴玖.双相不锈钢[M].北京:冶金工业出版社,1999.
【4】马忠灿.奥氏体不锈钢晶间腐蚀产生原因及处理方法[J].轻工科技,2012,28(4):35-36.
【5】林晓云.不锈钢焊接接头晶间腐蚀性能的控制[J].中国修船,2007,20(1):37-39.
【6】王建.晶间腐蚀的危害及原因分析[J].锻造技术,2011,32(12):1756-1759.
【7】马礼敦.X射线粉末衍射的发展与应用——纪念X射线粉末衍射发现一百年(待续)[J].理化检验(物理分册),2016,52(7):461-468.
【8】王浩,魏光强,徐祺.某电站核岛设备冷却系统传热管的泄漏原因分析[J].理化检验(物理分册),2017,53(1):51-57.
【9】王荣.机械装备的失效分析(续前)——第6讲X射线分析技术[J]. 理化检验(物理分册),2017,53(8):562-572.
【10】李荻.电化学原理[M].3版.北京:北京航空航天大学出版社,2008.
【2】王振坤.SAF2205双相不锈钢焊接工艺分析[J].现代盐化工,2020,47(3):65-66.
【3】吴玖.双相不锈钢[M].北京:冶金工业出版社,1999.
【4】马忠灿.奥氏体不锈钢晶间腐蚀产生原因及处理方法[J].轻工科技,2012,28(4):35-36.
【5】林晓云.不锈钢焊接接头晶间腐蚀性能的控制[J].中国修船,2007,20(1):37-39.
【6】王建.晶间腐蚀的危害及原因分析[J].锻造技术,2011,32(12):1756-1759.
【7】马礼敦.X射线粉末衍射的发展与应用——纪念X射线粉末衍射发现一百年(待续)[J].理化检验(物理分册),2016,52(7):461-468.
【8】王浩,魏光强,徐祺.某电站核岛设备冷却系统传热管的泄漏原因分析[J].理化检验(物理分册),2017,53(1):51-57.
【9】王荣.机械装备的失效分析(续前)——第6讲X射线分析技术[J]. 理化检验(物理分册),2017,53(8):562-572.
【10】李荻.电化学原理[M].3版.北京:北京航空航天大学出版社,2008.
相关信息