Testing of compressive strength of grouting materials by surface hardness method
摘 要
套筒内灌浆料的抗压强度是影响节点连接性能的关键因素之一,现场难以准确测量该参数。分析对比了现有检测方法的优缺点,阐明了表面硬度法的独特优势以及缺乏工程验证的不足,并依据已建立的测强曲线,开展了实际工程验证。结果表明,对于所抽检的6个剪力墙,表面硬度法与同条件试件法检测结果的相对误差较小,为5.55%~10.79%,结果可靠性较好;同时,从应用过程中提炼了该方法现场操作的主要步骤,可供工程检测人员参考。
Abstract
The compressive strength of the grouting material in the sleeve is one of the key factors affecting the joint performance. It is difficult to messure the parameters accurately on site. This paper analyzed the advantages and disadvantages of existing detection methods, described the unique advantages of surface hardness method and its need of engineering verification, and according to the established strength curve, the application of practical engineering is verified. The results in the samples show that the relative error between the test results by surface hardness method and the specimens under the same conditions is small, ranging from 7.74% to 10.79%. At the same time, the main steps of the field operation of the method are extracted from the application process, which can be used as a reference for engineering inspection personnel.
中图分类号 TG115.28 DOI 10.11973/wsjc202108006
所属栏目 试验研究
基金项目 国家重点研发计划项目(2016YFC0701800);江苏省建设系统科技项目(2017ZD122,2020ZD60)
收稿日期 2021/3/19
修改稿日期
网络出版日期
作者单位点击查看
联系人作者顾盛(514544728@qq.com)
备注吴玉龙(1988-),男,硕士,工程师,主要从事检测技术开发、结构检测鉴定工作
引用该论文: WU Yulong,ZHAO Jianhua,GU Sheng,SUN Bin,CHEN Manjun. Testing of compressive strength of grouting materials by surface hardness method[J]. Nondestructive Testing, 2021, 43(8): 25~30
吴玉龙,赵建华,顾盛,孙彬,陈满军. 灌浆料抗压强度的表面硬度法检测[J]. 无损检测, 2021, 43(8): 25~30
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王思文, 张永强, 李军华.预制装配式建筑套筒灌浆连接技术研究[J]. 工程技术研究, 2019, 4(19):38-39.
【2】XU F, WANG K, WANG S G, et al.Experimental bond behavior of deformed rebars in half-grouted sleeve connections with insufficient grouting defect[J]. Construction and Building Materials, 2018, 185:264-274.
【3】郑清林, 王霓, 陶里, 等. 套筒灌浆缺陷对装配式混凝土柱抗震性能影响的试验研究[J]. 土木工程学报, 2018, 51(5):75-83.
【4】孙彬, 毛诗洋, 张晋峰, 等. 钢筋套筒连接用灌浆料抗压强度影响因素试验研究[J]. 工程质量, 2017, 35(6):25-28.
【5】熊杨, 李俊华, 孙彬, 等. 装配式建筑套筒灌浆料强度及影响因素[J]. 建筑材料学报, 2019, 22(2):272-277.
【6】顾盛, 吴玉龙, 赵建华, 等. 一种检测装配式混凝土结构中套筒灌浆料实体强度的方法:CN108918310A[P]. 2018-11-30.
【7】吴玉龙, 丁晨晨, 顾盛, 等. 表面硬度法检测套筒灌浆料抗压强度试验研究[J]. 混凝土与水泥制品, 2020(9):79-83.
【2】XU F, WANG K, WANG S G, et al.Experimental bond behavior of deformed rebars in half-grouted sleeve connections with insufficient grouting defect[J]. Construction and Building Materials, 2018, 185:264-274.
【3】郑清林, 王霓, 陶里, 等. 套筒灌浆缺陷对装配式混凝土柱抗震性能影响的试验研究[J]. 土木工程学报, 2018, 51(5):75-83.
【4】孙彬, 毛诗洋, 张晋峰, 等. 钢筋套筒连接用灌浆料抗压强度影响因素试验研究[J]. 工程质量, 2017, 35(6):25-28.
【5】熊杨, 李俊华, 孙彬, 等. 装配式建筑套筒灌浆料强度及影响因素[J]. 建筑材料学报, 2019, 22(2):272-277.
【6】顾盛, 吴玉龙, 赵建华, 等. 一种检测装配式混凝土结构中套筒灌浆料实体强度的方法:CN108918310A[P]. 2018-11-30.
【7】吴玉龙, 丁晨晨, 顾盛, 等. 表面硬度法检测套筒灌浆料抗压强度试验研究[J]. 混凝土与水泥制品, 2020(9):79-83.
相关信息