Energy Efficiency Analysis and Optimization of Selective Laser Melting Rapid Formation Process
摘 要
通过选择性激光熔覆(SLM)系统能耗构成及特征分析,构建了系统能耗及比能耗(表征能效)与工艺过程参数间的定量关系,提出了以能效最优化为目标的工艺过程参数优化策略。结果表明:激光功率的选取需要考虑熔覆效率与能耗之间的矛盾;激光扫描速度的合理提升,可在熔覆道尺寸减小的劣势下提高熔覆效率,缩短激光熔覆的工作时间,进而降低能耗;较大的铺粉厚度与扫描速度,以及较小的横向搭接率,并匹配合适的激光功率,可有效降低SLM系统的比能耗。选择高度较小的方向进行堆垛成形可缩短层间停隔时间,进而降低系统能耗。
Abstract
The quantitative relationship between system energy consumption, specific energy consumption (indicating energy efficiency) and process parameters was established by analyzing the energy consumption composition and characteristics of selective laser melting (SLM) system. A process parameter optimization strategy for optimizing the energy efficiency was proposed. The results show that the contradiction between the cladding efficiency and the energy consumption should be considered in selecting the laser power. The reasonable increase of laser scanning speed could improve the cladding efficiency and shorten working time of laser cladding under the disadvantage of reducing the cladding channel size, and then reduce energy consumption. Larger powder-bed thickness and scanning speed, as well as smaller transverse overlap rate matching the appropriate laser power, could effectively reduce the specific energy consumption of the SLM system. Choosing a direction with a smaller height for stacking could shorten the interlayer time and reduce the energy consumption of the system.
中图分类号 TH162 TG146 DOI 10.11973/jxgccl202110010
所属栏目 物理模拟与数值模拟
基金项目 国家自然科学基金面上项目(52075159);中国博士后科学基金资助项目(2019M652755);湖南省教育厅科学研究项目(19C0754);江西省教育厅科学研究项目(GJJ191277,GJJ191283);国家金属材料近净成形工程技术研究中心开放基金资助项目(2020013)
收稿日期 2020/9/14
修改稿日期 2021/9/10
网络出版日期
作者单位点击查看
备注肖罡(1983-),男,江西九江人,教授,博士
引用该论文: XIAO Gang,GAO Bin,HAN Yan,WAN Keqian,YANG Qinwen. Energy Efficiency Analysis and Optimization of Selective Laser Melting Rapid Formation Process[J]. Materials for mechancial engineering, 2021, 45(10): 75~83
肖罡,高彬,韩燕,万可谦,杨钦文. 选择性激光熔覆快速成形工艺过程能效分析与优化[J]. 机械工程材料, 2021, 45(10): 75~83
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】何红秀, 吴专, 王君, 等.选择性激光熔化中基于最小能量理论的参数优化研究[J].组合机床与自动化加工技术, 2019(7):51-55. HE H X, WU Z, WANG J, et al.Parameter optimization research based on minimum energy theory in selective laser melting[J].Modular Machine Tool & Automatic Manufacturing Technique, 2019(7):51-55.
【2】黄凤晓, 江中浩, 张健.激光熔覆工艺参数对单道熔覆层宏观尺寸的影响[J].热加工工艺, 2010, 39(18):119-121. HUANG F X, JIANG Z H, ZHANG J.Effects of laser cladding parameters on macro-dimensions of laser cladding layer[J].Hot Working Technology, 2010, 39(18):119-121.
【3】METELKOVA J, KINDS Y, KEMPEN K, et al.On the influence of laser defocusing in selective laser melting of 316L[J].Additive Manufacturing, 2018, 23:161-169.
【4】YI L, RAVANI B, AURICH J C.Development of a simulation tool for predicting energy consumption of selective laser melting by using MATLAB/Simulink[J].Procedia CIRP, 2019, 81:28-33.
【5】YI L, GLATT M, THOMAS KUO T Y, et al.A method for energy modeling and simulation implementation of machine tools of selective laser melting[J].Journal of Cleaner Production, 2020, 263:121282.
【6】ZHOU Y H, ZHANG Z H, WANG Y P, et al.Selective laser melting of typical metallic materials:An effective process prediction model developed by energy absorption and consumption analysis[J].Additive Manufacturing, 2019, 25:204-217.
【7】ZHU Y, PENG T, JIA G F, et al.Electrical energy consumption and mechanical properties of selective-laser-melting-produced 316L stainless steel samples using various processing parameters[J].Journal of Cleaner Production, 2019, 208:77-85.
【8】董萌萌, 李涛, 郭燕春, 等.激光熔覆系统能耗建模分析方法研究[J].大连理工大学学报, 2018, 58(3):229-237. DONG M M, LI T, GUO Y C, et al.Investigation on energy consumption modeling analysis method of laser cladding system[J].Journal of Dalian University of Technology, 2018, 58(3):229-237.
【9】严灿, 梁龙, 毕仁贵.面向比能耗的磨削加工建模及工艺参数分析[J].机电信息, 2018(24):94-95. YAN C, LIANG L, BI R G.Grinding process modeling and process parameter analysis oriented to specific energy consumption[J].Mechanical and Electrical Information, 2018(24):94-95.
【10】许双梅.SLM成形过程能耗分析方法与预测模型研究[D].杭州:浙江大学, 2018. XU S M.Energy analysis and modeling approach for selective laser melting processes[D].Hangzhou:Zhejiang University, 2018.
【2】黄凤晓, 江中浩, 张健.激光熔覆工艺参数对单道熔覆层宏观尺寸的影响[J].热加工工艺, 2010, 39(18):119-121. HUANG F X, JIANG Z H, ZHANG J.Effects of laser cladding parameters on macro-dimensions of laser cladding layer[J].Hot Working Technology, 2010, 39(18):119-121.
【3】METELKOVA J, KINDS Y, KEMPEN K, et al.On the influence of laser defocusing in selective laser melting of 316L[J].Additive Manufacturing, 2018, 23:161-169.
【4】YI L, RAVANI B, AURICH J C.Development of a simulation tool for predicting energy consumption of selective laser melting by using MATLAB/Simulink[J].Procedia CIRP, 2019, 81:28-33.
【5】YI L, GLATT M, THOMAS KUO T Y, et al.A method for energy modeling and simulation implementation of machine tools of selective laser melting[J].Journal of Cleaner Production, 2020, 263:121282.
【6】ZHOU Y H, ZHANG Z H, WANG Y P, et al.Selective laser melting of typical metallic materials:An effective process prediction model developed by energy absorption and consumption analysis[J].Additive Manufacturing, 2019, 25:204-217.
【7】ZHU Y, PENG T, JIA G F, et al.Electrical energy consumption and mechanical properties of selective-laser-melting-produced 316L stainless steel samples using various processing parameters[J].Journal of Cleaner Production, 2019, 208:77-85.
【8】董萌萌, 李涛, 郭燕春, 等.激光熔覆系统能耗建模分析方法研究[J].大连理工大学学报, 2018, 58(3):229-237. DONG M M, LI T, GUO Y C, et al.Investigation on energy consumption modeling analysis method of laser cladding system[J].Journal of Dalian University of Technology, 2018, 58(3):229-237.
【9】严灿, 梁龙, 毕仁贵.面向比能耗的磨削加工建模及工艺参数分析[J].机电信息, 2018(24):94-95. YAN C, LIANG L, BI R G.Grinding process modeling and process parameter analysis oriented to specific energy consumption[J].Mechanical and Electrical Information, 2018(24):94-95.
【10】许双梅.SLM成形过程能耗分析方法与预测模型研究[D].杭州:浙江大学, 2018. XU S M.Energy analysis and modeling approach for selective laser melting processes[D].Hangzhou:Zhejiang University, 2018.
相关信息