A method of making exposure curve of radiographic testing with EXCEL software
摘 要
介绍了一种射线检测曝光曲线的EXCEL软件制作方法,不需要任何语言环境支持,只要按照程序提示进行曝光,并将测得的黑度数据输入相应表格内,EXCEL软件就能利用公式插值计算代替人工方法绘制黑度-厚度曲线及根据曲线确定厚度,以图表的形式立即生成曝光曲线。该方法可以大大减少中间绘图、查图、最终绘图的工作量,具有方便、快捷、美观、精确的特点。
Abstract
This paper introduces a method of making ray exposure curve by using the EXCEL with pure formula method, and it does not need any language environment support. As long as the exposure is carried out according to the program prompt, and the measured blackness data is input into the corresponding table, the spreadsheet will use formula interpolation calculation instead of manually drawing D-T curve and will determine the thickness value according to the curve, and then according to the thickness value, the exposure curve can be generated immediately in the form of chart, which can greatly reduce the workload of intermediate drawing, chart checking and final drawing. It is convenient, fast, neat and accurate.
中图分类号 TG115.28 DOI 10.11973/wsjc202110005
所属栏目 试验研究
基金项目
收稿日期 2021/3/8
修改稿日期
网络出版日期
作者单位点击查看
联系人作者张宏亮(1362580@qq.com)
备注张宏亮(1970-),男,本科,高级工程师,主要从事无损检测技术及科研工作
引用该论文: ZHANG Hongliang,XU Yongsheng. A method of making exposure curve of radiographic testing with EXCEL software[J]. Nondestructive Testing, 2021, 43(10): 25~28
张宏亮,许永胜. 射线检测曝光曲线的EXCEL软件制作方法[J]. 无损检测, 2021, 43(10): 25~28
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】李海华, 吴焕利, 李明, 等.X射线机射线能量选择的直线回归法分析[J].无损探伤, 2004, 28(3):23-28.
【2】胡联伟. 曝光曲线制作的新方法及其应用[J].无损探伤, 2001, 25(2):11-15, 44.
【3】周勇, 李广波.由EXCEL绘制和应用X射线曝光曲线[J].无损探伤, 2009, 33(3):9-13.
【4】杨德宏. X射线曝光曲线的制作及应用[J].科技视界, 2012(22):62-64, 84.
【5】王晨宝, 钟黎明.基于Excel VBA的射线曝光曲线制作方法[J].现代工业经济和信息化, 2012, 2(10):58-60, 62.
【6】刘文起, 罗光.使用中X射线机曝光曲线的绘制[J].无损检测, 1999, 21(7):326-327.
【7】张修安. X射线机曝光曲线软件编制[J].中国特种设备安全, 2012, 28(9):39-40.
【8】李奎元, 孔令昌.Origin软件在X射线机曝光曲线制作中的应用[J].中国特种设备安全, 2008, 24(6):61-63.
【9】王道文, 于燕.基于Matlab的最小二乘法在X射线机曝光曲线制作中的应用[J].中国特种设备安全, 2012, 28(5):35-36.
【10】李衍. 射线曝光曲线多用法[J].无损探伤, 2001, 25(2):1-4.
【11】强天鹏. 射线检测[M].北京:中国劳动社会保障出版社, 2007.
【2】胡联伟. 曝光曲线制作的新方法及其应用[J].无损探伤, 2001, 25(2):11-15, 44.
【3】周勇, 李广波.由EXCEL绘制和应用X射线曝光曲线[J].无损探伤, 2009, 33(3):9-13.
【4】杨德宏. X射线曝光曲线的制作及应用[J].科技视界, 2012(22):62-64, 84.
【5】王晨宝, 钟黎明.基于Excel VBA的射线曝光曲线制作方法[J].现代工业经济和信息化, 2012, 2(10):58-60, 62.
【6】刘文起, 罗光.使用中X射线机曝光曲线的绘制[J].无损检测, 1999, 21(7):326-327.
【7】张修安. X射线机曝光曲线软件编制[J].中国特种设备安全, 2012, 28(9):39-40.
【8】李奎元, 孔令昌.Origin软件在X射线机曝光曲线制作中的应用[J].中国特种设备安全, 2008, 24(6):61-63.
【9】王道文, 于燕.基于Matlab的最小二乘法在X射线机曝光曲线制作中的应用[J].中国特种设备安全, 2012, 28(5):35-36.
【10】李衍. 射线曝光曲线多用法[J].无损探伤, 2001, 25(2):1-4.
【11】强天鹏. 射线检测[M].北京:中国劳动社会保障出版社, 2007.
相关信息