搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
核燃料组件破损自动超声检测系统的研制
          
Development of automatic ultrasonic inspection system for damaged of nuclear fuel assembly

摘    要
为满足核燃料组件破损检测的需要,研制了适用于燃料组件破损超声检测的成套检测系统。基于燃料棒破损后内腔充满水的特点,通过检测沿燃料棒包壳传输超声信号的能量损失来判断燃料棒是否破损。介绍了检测系统组成,并结合检测环境的特殊需求进行了一系列验证试验,包括标定组件和模拟组件超声信号测试、辐照试验、探头高温试验和现场验证等。试验结果表明,研制的超声探头及检测系统能够有效识别完好标定棒和破损标定棒,该检测系统具备对破损燃料组件实施自动超声检测的能力。
标    签 燃料棒   破损   自动超声检测   fuel rod   damage   automatic ultrasonic testing  
 
Abstract
In order to meet the needs of nuclear fuel assembly damage inspection, a complete inspection system suitable for ultrasonic inspection of fuel assembly damage has been developed. Based on the characteristics that the inner cavity of the fuel rod is filled with water after the fuel rod is damaged, the energy loss of the ultrasonic signal transmitted along the fuel rod cladding is detected to determine whether the fuel rod is damaged. The composition of the detection system was introducted, and a series of verification tests based on the special requirements of the detection environment were carried out, including ultrasonic signal test of calibration components and analog components, irradiation test, probe high temperature test and field verification. The test results show that the developed ultrasonic probe and inspection system can effectively identify intact calibration rods and damaged calibration rods. The inspection system has the ability to perform automatic ultrasonic inspection of damaged fuel assemblies.

中图分类号 TG115.28   DOI 10.11973/wsjc202112014

 
  中国光学期刊网论文下载说明


所属栏目 仪器研制

基金项目

收稿日期 2021/5/19

修改稿日期

网络出版日期

作者单位点击查看


备注朱性利(1979-),男,高级工程师,主要从事核电站自动化运维装备开发方面的研究工作

引用该论文: ZHU Xingli,GAN Wenjun,SHI Zhibin,CAI Jiafan,NIE Yong. Development of automatic ultrasonic inspection system for damaged of nuclear fuel assembly[J]. Nondestructive Testing, 2021, 43(12): 66~70
朱性利,甘文军,石志彬,蔡家藩,聂勇. 核燃料组件破损自动超声检测系统的研制[J]. 无损检测, 2021, 43(12): 66~70


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】邓浚献,邓峰.水冷反应堆燃料元件的在役检测和处理[J].核安全,2009,8(4):47-57.
 
【2】李颖,尹绪雨.啜吸探测技术在燃料检查中的应用[J].核电子学与探测技术,2012,32(5):523-527.
 
【3】BORGERS H, DELERY D R, OLSSON T. Inspection and repair of boiling water reactor fuel assemblies [J]. Kerntechnik, 1991, 56(2):98-100.
 
【4】任亮,李国云,江林志,等.压水堆燃料组件池边检查技术研究进展[J].科技导报,2015,33(18):91-95.
 
【5】陈济东.大亚湾核电站系统及运行-上册[M].北京:原子能出版社,1994.
 
相关信息
   标题 相关频次
 AFA 3G破损燃料棒的超声检测
 9
 ASME与RCC-M规范中核级设备对接焊缝制造阶段的超声检测要求对比
 4
 高温超声探头的制作及性能试验
 4
 核电厂超声检测技术的应用
 4
 核级高密度聚乙烯管道热熔接头的相控阵超声检测
 4
 小管径管材外形尺寸的高精度测量技术
 4
 ASME规范对核设备制造和运行期间的无损检验要求对比
 3
 核电枞树型汽轮机叶片根部的超声相控阵检测技术
 3
 一种用于核反应堆压力容器远程水下自动超声检测的相控阵探头设计
 3
 AP1000核电厂爆破阀剪切盖锻件的超声检测
 2
 安全端异种金属焊缝超声检测中TRL探头的选用及应用技巧
 2
 超声爬波在异形薄壁管材超声检测中的应用
 2
 电阻点焊熔核直径的相控阵超声检测
 2
 反应堆压力容器超声自动标定扫查装置的设计
 2
 钢悬链线立管焊缝的自动超声检测
 2
 核电厂管道射线插塞焊缝的无损检测
 2
 核电厂涡流检测的现状及展望
 2
 核电站堆内构件围板螺栓的超声检测
 2
 核电站蒸汽发生器传热管涡流信号的有限元仿真
 2
 核设备不锈钢堆焊层对超声检测的影响
 2
 核设备不锈钢堆焊层下裂纹超声波检测技术
 2
 宽频带窄脉冲TRL探头在奥氏体不锈钢焊缝超声检测中的优越性
 2
 某核电厂小径管不锈钢母材的相控阵超声检测工艺
 2
 汽车用外圈破损失效分析
 2
 试验研究燃料棒X射线照相技术
 2
 铁素体薄壁对接焊缝的相控阵超声检测
 2
 中核武汉核电运行技术股份有限公司/中核核动力在役检查及评定重点实验室2022年度进展
 2
 中核武汉核电运行技术股份有限公司中核核动力在役检查及评定重点实验室2021年度进展
 2
 304不锈钢焊缝附近的点蚀损伤发展规律
 1
 6063铝合金在不同应力状态下的变形及损伤行为
 1