Determination of equivalent coefficient of digital radiography for ceramic composite armor and aluminum alloy
摘 要
陶瓷复合装甲属于非标准材料,在进行数字X射线成像(DR)检测时,其曝光条件的确定缺乏相应依据。在相同的透照管电压下,对SiC陶瓷复合装甲阶梯试块及6063铝合金阶梯试块进行了数字X射线成像检测,以确定两种材料的等效系数。试验结果表明,透照管电压为45 kV~70 kV时,SiC陶瓷复合装甲与6063铝合金的等效系数为0.78~0.89。该试验结果对SiC陶瓷复合装甲数字X射线成像检测技术条件的确定具有一定的指导意义。
Abstract
Ceramic composite armor is a kind of non-standard material. In the process of X-ray digital radiography , the determination of its exposure conditions lacks of corresponding basis. The X-ray digital radiography of SiC ceramic composite armor step test block and 6063 aluminum alloy step test block was carried out by using the equivalent coefficient method under the same tube voltage. The results show that the equivalent coefficient of SiC ceramic composite armor and 6063 aluminum alloy is 0.78-0.89 when the tube voltage is 45 kV-70 kV. The test results have a certain guiding significance for the determination of the X-ray digital radiography technical conditions of SiC ceramic composite armor.
中图分类号 TG115.28 DOI 10.11973/wsjc202202006
所属栏目 试验研究
基金项目
收稿日期 2021/5/27
修改稿日期
网络出版日期
作者单位点击查看
联系人作者朱贵锋(zhugf81@163.com)
备注朱贵锋(1981-),男,硕士,助理研究员,主要从事无损检测的研究工作
引用该论文: ZHU Guifeng,JIAO Zhongbin,LI Shuai,MENG Quansheng,WANG Yan. Determination of equivalent coefficient of digital radiography for ceramic composite armor and aluminum alloy[J]. Nondestructive Testing, 2022, 44(2): 27~30
朱贵锋,焦钟斌,李帅,孟全胜,王琰. 陶瓷复合装甲与铝合金数字射线等效系数的确定[J]. 无损检测, 2022, 44(2): 27~30
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】赵付宝,王从科,汤振鹤,等.陶瓷材料与铝合金数字射线检测等效系数的确定[J].无损检测,2018,40(7):39-42.
【2】王学芹,王晓宇,武兴华,等.CLF-1钢X数字射线照相等效系数的确定[J].宇航材料工艺,2020,50(2):80-85.
【3】蔡闰生,袁生平,任华友.射线透照等效系数测试方法分析[J].宇航材料工艺,2014,44(4):86-89.
【4】郭文明,陈宇亮.X射线图像灰度值与透照厚度的定量关系[J].无损检测,2016,38(2):14-17.
【5】强天鹏.射线检测[M].北京:中国劳动社会保障出版社,2007.
【2】王学芹,王晓宇,武兴华,等.CLF-1钢X数字射线照相等效系数的确定[J].宇航材料工艺,2020,50(2):80-85.
【3】蔡闰生,袁生平,任华友.射线透照等效系数测试方法分析[J].宇航材料工艺,2014,44(4):86-89.
【4】郭文明,陈宇亮.X射线图像灰度值与透照厚度的定量关系[J].无损检测,2016,38(2):14-17.
【5】强天鹏.射线检测[M].北京:中国劳动社会保障出版社,2007.
相关信息