Optimization design of water-jet coupling nozzle for phased array ultrasonic testing
摘 要
为提高相控阵超声检测系统对风电叶片等大型构件的检测精度,设计了4种不同结构的矩形出水口喷嘴,通过数值仿真对比分析了各个喷嘴的流动特性。分析发现应用维多辛斯基曲线作为引导进行流道内表面设计的喷嘴,其流束发散最慢,射流最稳定。为降低加工成本,基于道格拉斯-普克算法将理想的维多辛斯基曲线简化为一种分段式折线,并进行试验验证。结果表明,简化后的喷嘴与应用维多辛斯基曲线的喷嘴性能接近,射流稳定性好,具有实际应用价值。
Abstract
In order to improve the detection accuracy of phased array ultrasonic testing system for large components such as wind turbine blades, four kinds of rectangular outlet nozzles with different structures were designed in this paper. The flow characteristics of each nozzle are compared and analyzed by numerical simulation. It is found that the nozzle with the inner surface of the flow channel designed by using the Witozinsky curve as the guide has the slowest beam divergence and the most stable jet. In order to reduce the processing cost, the ideal Witozinsky curve was simplified as a piecewise broken line based on the Douglas-Pucker algorithm, and the experimental verification was carried out. The results show that the performance of the simplified nozzle is close to that of the nozzle using the Witozinsky curve, and the jet stability is good, which has practical application value.
中图分类号 TG115.28 DOI 10.11973/wsjc202205001
所属栏目 试验研究
基金项目 国家重点研发计划资助项目(2018YFB2004000);宁夏自然科学基金资助项目(2018AAC03058);宁夏青年科技人才托举工程(TJGC2019052)
收稿日期 2021/12/1
修改稿日期
网络出版日期
作者单位点击查看
备注郭猛(1996-),男,硕士研究生,主要研究方向为机电一体化及数值仿真
引用该论文: GUO Meng,BAN Wei,LIU Lulu,YUAN Haoyang,CHEN Jiaqi,YAO Dong. Optimization design of water-jet coupling nozzle for phased array ultrasonic testing[J]. Nondestructive Testing, 2022, 44(5): 1~5
郭猛,班伟,刘露露,袁豪杨,陈嘉琪,姚东. 相控阵超声检测用喷水耦合喷嘴的优化设计[J]. 无损检测, 2022, 44(5): 1~5
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】姚钢,杨浩猛,周荔丹,等.大容量海上风电机组发展现状及关键技术[J].电力系统自动化,2021,45(21):33-47.
【2】王晓宁,刘沛.玻璃纤维结构风电叶片的超声相控阵检测方法研究[J].无损探伤,2014,38(5):8-13.
【3】石一飞.风电叶片玻璃纤维复合材料相控阵超声检测[J].无损检测,2018,40(11):56-58.
【4】ZHANG N N,BIAN W T,PAN B B.The application of ultrasonic phased array technology in wind turbine blade defect detection system[J].IOP Conference Series:Earth and Environmental Science,2021,675(1):012077.
【5】王柄方,韩赞东,原可义,等.复合材料喷水超声检测工艺[J].无损检测,2010,32(8):616-619,630.
【6】蔡毅,苏国兵.高压水射流喷嘴设计及有限元分析[J].机械设计与研究,2017,33(6):163-167,171.
【7】VON BERNUS L,BULAVINOV A,DALICHOW M,et al.Sampling phased array a new technique for signal processing and ultrasonic imaging[J].Insight-Non-Destructive Testing and Condition Monitoring,2006,48(9):545-549.
【2】王晓宁,刘沛.玻璃纤维结构风电叶片的超声相控阵检测方法研究[J].无损探伤,2014,38(5):8-13.
【3】石一飞.风电叶片玻璃纤维复合材料相控阵超声检测[J].无损检测,2018,40(11):56-58.
【4】ZHANG N N,BIAN W T,PAN B B.The application of ultrasonic phased array technology in wind turbine blade defect detection system[J].IOP Conference Series:Earth and Environmental Science,2021,675(1):012077.
【5】王柄方,韩赞东,原可义,等.复合材料喷水超声检测工艺[J].无损检测,2010,32(8):616-619,630.
【6】蔡毅,苏国兵.高压水射流喷嘴设计及有限元分析[J].机械设计与研究,2017,33(6):163-167,171.
【7】VON BERNUS L,BULAVINOV A,DALICHOW M,et al.Sampling phased array a new technique for signal processing and ultrasonic imaging[J].Insight-Non-Destructive Testing and Condition Monitoring,2006,48(9):545-549.
相关信息