Array eddy current testing of nuclear fuel cladding tube
摘 要
为研究阵列涡流技术在核燃料包壳管在线检测中的适用性,采用阵列涡流检测设备在人工缺陷对比样管上开展了检测能力验证试验。试验结果表明,对于壁厚为0.55 mm的核燃料包壳管,该方法可准确识别ϕ 0.2 mm的通孔以及深度为壁厚的10%、宽为0.2 mm、长为3 mm的内外壁周向槽和轴向槽等人工缺陷。
Abstract
In order to study the applicability of array eddy current technology in the online detection of nuclear fuel cladding tubes, the array eddy current testing equipment was used to verify its detection ability of artificial defect contrast tubes. The test results show that the artificial defects such as ϕ 0. 2 mm through hole, the inter and outer wall defects of depth of 10% of wall thickness, width of 0. 2 mm, length of 3 mm and so on can be accurately identified within 0. 55 mm wall thickness range of nuclear fuel cladding tube.
中图分类号 TG115.28 DOI 10.11973/wsjc202205007
所属栏目 实践经验
基金项目
收稿日期 2021/11/4
修改稿日期
网络出版日期
作者单位点击查看
备注俞东宝(1983-),男,高级工程师,主要从事核燃料元件制造工作
引用该论文: YU Dongbao,TANG Hui,ZHANG Xiaogang,CHENG Zhifei. Array eddy current testing of nuclear fuel cladding tube[J]. Nondestructive Testing, 2022, 44(5): 30~32
俞东宝,汤慧,张小刚,成志飞. 核燃料包壳管的阵列涡流检测[J]. 无损检测, 2022, 44(5): 30~32
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】凌海军,范清松,宫秋云,等.核用锆合金包壳管超声和涡流检测内控标准的确定[J].无损探伤,2019,43(4):26-29.
【2】夏健文,韩承.核燃料锆合金包壳管的超声波探伤[J].核动力工程,2016,37(3):122-126.
【3】杨洪斌,仝茂峰,刘金良,等.阵列涡流检测的缺陷定性定量探究[J].中国测试,2020,46(增刊2):145-149.
【2】夏健文,韩承.核燃料锆合金包壳管的超声波探伤[J].核动力工程,2016,37(3):122-126.
【3】杨洪斌,仝茂峰,刘金良,等.阵列涡流检测的缺陷定性定量探究[J].中国测试,2020,46(增刊2):145-149.
相关信息