Determination of Carbon in High Beryllium Beryllium-Alminium Alloy by High Frequency Induction Combustion- Infrared Absorption Spectrometry
摘 要
高铍铍铝合金(铍质量分数为60%~65%)中的碳含量直接影响合金的力学性能,因此进行了题示研究。将高铍铍铝合金样品0.10~0.20 g置于预先盛有0.3 g纯铁助熔剂的陶瓷坩埚中,覆盖上2.0 g钨锡助熔剂,采用高频感应燃烧-红外吸收光谱法测定其中碳的含量。结果表明,方法的检出限(3s)为0.000 69%。对不同碳含量的高铍铍铝合金样品分别测定11次,测定值的相对标准偏差(RSD)为2.4%~6.0%。
Abstract
The content of carbon in high beryllium beryllium-alminium alloy (wBe, 60%-65%) directly influenced on the mechanical properties of alloy, so the research as shown in the title was studied. 0.10-0.20 g of the high beryllium beryllium-alminium alloy sample was placed into a ceramic crucible prefilled with 0.3 g of iron flux, and then covered with 2.0 g tungsten-tin flux. Carbon in the sample was determined by high frequency induction combustion-infrared absorption spectrometry. It was shown that detection limit (3s) of this method was 0.000 69%. The high beryllium beryllium-alminium alloy samples with different contents of carbon were determined 11 times, with RSDs of the determined values in the range of 2.4%-6.0%.
中图分类号 O657.33 DOI 10.11973/lhjy-hx202212015
所属栏目 工作简报
基金项目 宁夏回族自治区2020年产业创新揭榜项目(20200108)
收稿日期 2021/5/26
修改稿日期
网络出版日期
作者单位点击查看
备注刘军,工程师,主要从事稀有金属材料的成分检测工作
引用该论文: LIU Jun,SUN Hongtao. Determination of Carbon in High Beryllium Beryllium-Alminium Alloy by High Frequency Induction Combustion- Infrared Absorption Spectrometry[J]. Physical Testing and Chemical Analysis part B:Chemical Analysis, 2022, 58(12): 1457~1460
刘军,孙洪涛. 高频感应燃烧-红外吸收光谱法测定高铍铍铝合金中碳的含量[J]. 理化检验-化学分册, 2022, 58(12): 1457~1460
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】刘孝宁,马世光.铍铝合金的研究与应用[J].稀有金属, 2003,27(1):62-65.
【2】王战宏,王莉,吴艳青,等.铍铝合金室温拉伸及原位疲劳失效分析[J].粉末冶金技术, 2007,25(3):163-166.
【3】许德美,李峰,王东新,等.组织缺陷对金属铍室温断裂行为的影响规律研究[J].稀有金属, 2010,34(6):844-849.
【4】常国梁,刘攀,张毅.高频感应燃烧-红外吸收光谱法测定蒙乃尔镍铜合金中碳[J].冶金分析, 2020,40(7):16-21.
【5】张庸,杨丽,詹秀嫣,等.高频燃烧红外吸收法测定镍基高温合金中碳的助熔剂影响探讨[J].冶金分析, 2016,36(1):52-56.
【6】钟华.助熔剂对碳酸钠校准高频燃烧红外吸收法测定钢铁中高含量碳的影响因素探讨[J].冶金分析, 2019,39(9):14-20.
【7】魏琳.硅铁中碳、硫的高频红外测定[J].中国井矿盐, 2010,41(1):36-38.
【8】郑伟,梁清华,魏宏楠,等.高频燃烧红外吸收光谱法测定铪合金中碳[J].中国无机分析化学, 2019,9(3):45-47.
【2】王战宏,王莉,吴艳青,等.铍铝合金室温拉伸及原位疲劳失效分析[J].粉末冶金技术, 2007,25(3):163-166.
【3】许德美,李峰,王东新,等.组织缺陷对金属铍室温断裂行为的影响规律研究[J].稀有金属, 2010,34(6):844-849.
【4】常国梁,刘攀,张毅.高频感应燃烧-红外吸收光谱法测定蒙乃尔镍铜合金中碳[J].冶金分析, 2020,40(7):16-21.
【5】张庸,杨丽,詹秀嫣,等.高频燃烧红外吸收法测定镍基高温合金中碳的助熔剂影响探讨[J].冶金分析, 2016,36(1):52-56.
【6】钟华.助熔剂对碳酸钠校准高频燃烧红外吸收法测定钢铁中高含量碳的影响因素探讨[J].冶金分析, 2019,39(9):14-20.
【7】魏琳.硅铁中碳、硫的高频红外测定[J].中国井矿盐, 2010,41(1):36-38.
【8】郑伟,梁清华,魏宏楠,等.高频燃烧红外吸收光谱法测定铪合金中碳[J].中国无机分析化学, 2019,9(3):45-47.
相关信息