Five-axis ultrasonic imaging detection system for copper-steel bonding layer defects in aerospace rotors
摘 要
针对现有的四轴平动扫描成像系统检测航空转子时系统定位精度低、抗干扰能力差的问题,研制了一套五轴超声成像检测系统。该系统对检测工作台,探头夹持装置及抗干扰装置进行了优化设计,改进了滤波方式,并在软件中加入探头对中算法。采用该系统进行抗干扰性试验,并对系统的定位精度进行验证,试验结果表明,五轴超声成像检测系统的定位精度高,成像效果好,能有效抑制电磁干扰,实现转子的连续稳定检测。
Abstract
Aiming at the problems of low positioning accuracy and poor anti-interference ability of the existing four-axis translational scanning imaging system for detecting aeronautical rotors, a five-axis ultrasonic imaging detection system was developed. The system optimizes the design of the detection workbench, the probe clamping device and the anti-interference device, improves the filtering method, and adds the probe alignment algorithm into the software. The system is used for anti-interference testing, and the positioning accuracy of the system is verified.The experimental results show that the five-axis ultrasonic imaging detection system has high positioning accuracy, good imaging effect, can effectively suppress electromagnetic interference, and realize the continuous and stable detection of the rotor.
中图分类号 TG115.28 DOI 10.11973/wsjc202302014
所属栏目 仪器研制
基金项目
收稿日期 2022/3/11
修改稿日期
网络出版日期
作者单位点击查看
备注安仕伟(1996-),男,硕士研究生,主要研究方向为超声检测系统研发及应用
引用该论文: AN Shiwei,LIU Xunfeng,HU Ke,LIU Kangzheng,CHENG Shuyun,HU Wenjie. Five-axis ultrasonic imaging detection system for copper-steel bonding layer defects in aerospace rotors[J]. Nondestructive Testing, 2023, 45(2): 66~71
安仕伟,刘勋丰,胡克,刘康正,程树云,胡文杰. 航空转子铜-钢结合层缺陷的五轴超声成像检测系统[J]. 无损检测, 2023, 45(2): 66~71
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张锐, 陈以方, 付德永. 复合材料手动扫描超声特征成像检测[J]. 材料工程, 2003, 31(4):34-38.
【2】刘新, 陆铭慧, 陈以方, 等. 双金属转子复合层超声特征成像系统[J]. 无损检测, 2007, 29(6):309-311, 318.
【3】罗雪峰. 多转子连续扫描超声特征成像系统的研究[D]. 南昌:南昌航空大学, 2018.
【4】郭夏阳, 林建平, 孙博. 扩散焊技术的研究进展[J]. 热加工工艺, 2014, 43(17):15-20.
【5】梁永宽, 张智. 高速轴向柱塞泵搅拌和摩擦功率损失及空化分析[D]. 秦皇岛:燕山大学, 2020.
【6】王飞, 田玉清. 铜合金-钢双金属柱塞液压泵转子材料的研制[J]. 粉末冶金工业, 2013, 23(3):56-60.
【7】刘少杰, 张国伟, 王明杰. 铜/钢双金属泵体转子界面结合技术研究[J]. 热加工工艺, 2015, 44(7):73-77.
【8】陆铭慧, 朱毅, 刘勋丰. 结构特殊航空构件的超声特征扫描成像检测[C]//西南地区第十一次无损检测学术年会暨2011年(昆明)国际无损检测仪器展览会论文集. 昆明:国际无损检测仪器展览会, 2011.
【2】刘新, 陆铭慧, 陈以方, 等. 双金属转子复合层超声特征成像系统[J]. 无损检测, 2007, 29(6):309-311, 318.
【3】罗雪峰. 多转子连续扫描超声特征成像系统的研究[D]. 南昌:南昌航空大学, 2018.
【4】郭夏阳, 林建平, 孙博. 扩散焊技术的研究进展[J]. 热加工工艺, 2014, 43(17):15-20.
【5】梁永宽, 张智. 高速轴向柱塞泵搅拌和摩擦功率损失及空化分析[D]. 秦皇岛:燕山大学, 2020.
【6】王飞, 田玉清. 铜合金-钢双金属柱塞液压泵转子材料的研制[J]. 粉末冶金工业, 2013, 23(3):56-60.
【7】刘少杰, 张国伟, 王明杰. 铜/钢双金属泵体转子界面结合技术研究[J]. 热加工工艺, 2015, 44(7):73-77.
【8】陆铭慧, 朱毅, 刘勋丰. 结构特殊航空构件的超声特征扫描成像检测[C]//西南地区第十一次无损检测学术年会暨2011年(昆明)国际无损检测仪器展览会论文集. 昆明:国际无损检测仪器展览会, 2011.
相关信息