Array eddy current inspection for reactor pool cladding weld in nuclear power plants
摘 要
核电厂反应堆水池普遍采用不锈钢覆面结构,在建造和运行期间均发生过泄漏现象。从覆面结构特点出发,开展了覆面焊缝的阵列涡流检测试验,主要探讨平面对接焊缝中人工刻槽和孔型缺陷的可检出性。结果验证了阵列涡流用于反应堆水池焊缝缺陷检测的可行性。通过对某电厂在役检测期间的反应堆水池焊缝进行阵列涡流检测,总结了其特点及存在的问题,可为核电厂在役期间水池查漏提供参考建议。
Abstract
The reactor pool of nuclear power plants generally adopts stainless steel cladding structure, leakage occurred during construction and operation. Based on the characteristics of cladding structures, experimental investigation of the array eddy current inspection of cladding weld was carried out. The detectability of manual groove and hole defects in plane butt weld was mainly investigated. The results verify the feasibility of using array eddy current to detect weld defects in reactor pool. Through the array eddy current inspection of the reactor pool weld during the in-service inspection of a power plant, its characteristics and some problems encountered are summarized, which can provide reference suggestions for the leak detection of the pool during the in-service inspection of nuclear power plant.
中图分类号 TG115.28 DOI 10.11973/wsjc202303004
所属栏目 试验研究
基金项目
收稿日期 2022/7/15
修改稿日期
网络出版日期
作者单位点击查看
备注李庆顺(1987-),男,工程师,主要从事核电厂在役无损检测新技术、新工艺方面的研究工作
引用该论文: LI Qingshun,LONG Di,HE Yi,YANG Hongbo,DENG Jiangyong. Array eddy current inspection for reactor pool cladding weld in nuclear power plants[J]. Nondestructive Testing, 2023, 45(3): 18~21
李庆顺,龙笛,何艺,杨宏博,邓江勇. 核电厂反应堆水池覆面焊缝的阵列涡流检测[J]. 无损检测, 2023, 45(3): 18~21
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】操丰, 王建军,丁有元.核电站水池不锈钢覆面泄漏检测及其焊接修复技术[J].机械制造文摘(焊接分册),2010(5):5-10.
【2】何庆琼, 于海峰,刘予.核电换料水池不锈钢覆面泄漏的氦检[J].无损检测,2018,40(9):44-47.
【3】马冰洋, 黄桂林,杨泽榕.焊缝涡流检测技术研究进展及应用[J].西部特种设备,2020,3(2):22-26.
【2】何庆琼, 于海峰,刘予.核电换料水池不锈钢覆面泄漏的氦检[J].无损检测,2018,40(9):44-47.
【3】马冰洋, 黄桂林,杨泽榕.焊缝涡流检测技术研究进展及应用[J].西部特种设备,2020,3(2):22-26.
相关信息