Automatic phased array ultrasonic testing of titanium alloy forging billets
摘 要
基于相控阵超声聚焦原理,通过仿真分析、理论声场数学模型以及基于图像插值的声场试验相结合的方法,对钛合金锻坯的线阵相控阵超声自动化检测方法进行了研究。结果表明,结合理论声场计算模型与声场测试试验,可以选用合适的参数准确检测厚度为2.5~300 mm的钛合金锻坯。
Abstract
Based on the phased array ultrasonic focusing principle, the automatic linear phased array ultrasonic detection method for titanium alloy forging billet is studied by combining simulation analysis, theoretical acoustic field mathematical model and sound field testing based on image interpolation. The results show that suitable parameters can be selected to accurately detect titanium alloy forging billet with the thickness of 2. 5-300 mm by combining theoretical sound field calculation model and sound field testing.
中图分类号 TG115.28 DOI 10.11973/wsjc202303005
所属栏目 试验研究
基金项目
收稿日期 2022/6/21
修改稿日期
网络出版日期
作者单位点击查看
联系人作者刘柯(ndtliuke@163.com)
备注刘柯(1991-),男,工程师,主要从事无损检测工作
引用该论文: LIU Ke,WANG Jianguo,ZHANG Jianing,WEI Yongzhe,GAO Huixian,GAO Yushe,LUO Wenzhong. Automatic phased array ultrasonic testing of titanium alloy forging billets[J]. Nondestructive Testing, 2023, 45(3): 22~28
刘柯,王建国,张嘉宁,韦勇哲,高慧贤,高玉社,罗文忠. 钛合金锻坯的相控阵超声自动检测[J]. 无损检测, 2023, 45(3): 22~28
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】周琦, 刘方军,李志军,等.相控阵超声成像技术与应用[J].兵器材料科学与工程,2002,25(3):34-37.
【2】周正干, 李文涛,李洋,等.相控阵超声水浸C扫描自动检测系统的研制[J].机械工程学报,2017,53(12):28-34.
【3】HANSEN W,HINTZE H. Ultrasonic testing of railway axles with the phased array technique experience during operation[J]. Insight Nondestructive Testing and Condition Monitoring,2005,47(6):358-360.
【4】付汝龙, 陈建华,林丹源,等.复合材料的相控阵超声C扫描成像检测[J].无损检测,2015,37(5):38-41.
【5】陈榕基. 基于超声相控技术的阵列探头参数优化设计研究[D].广州:华南理工大学,2012.
【6】魏文卿, 景洪伟, 伍凡. 线阵相控换能器阵列参数对聚焦性能的影响分析[J].声学技术, 2018, 37(2):192-199.
【7】王华, 单宝华,王鑫,等. 相控阵超声实时检测系统的研制[J]. 哈尔滨工业大学学报,2008,40(5):771-774.
【8】康达, 张宏, 马兆光, 等. 水浸相控阵超声线阵列检测聚焦法则设置[J]. 压力容器, 2018, 35(5):73-77.
【9】杜清良, 周宇,徐宁,等.CIVA仿真在核电厂汽轮机相控阵超声检测中的应用[J].工程与试验,2020,60(1):10-11,20.
【2】周正干, 李文涛,李洋,等.相控阵超声水浸C扫描自动检测系统的研制[J].机械工程学报,2017,53(12):28-34.
【3】HANSEN W,HINTZE H. Ultrasonic testing of railway axles with the phased array technique experience during operation[J]. Insight Nondestructive Testing and Condition Monitoring,2005,47(6):358-360.
【4】付汝龙, 陈建华,林丹源,等.复合材料的相控阵超声C扫描成像检测[J].无损检测,2015,37(5):38-41.
【5】陈榕基. 基于超声相控技术的阵列探头参数优化设计研究[D].广州:华南理工大学,2012.
【6】魏文卿, 景洪伟, 伍凡. 线阵相控换能器阵列参数对聚焦性能的影响分析[J].声学技术, 2018, 37(2):192-199.
【7】王华, 单宝华,王鑫,等. 相控阵超声实时检测系统的研制[J]. 哈尔滨工业大学学报,2008,40(5):771-774.
【8】康达, 张宏, 马兆光, 等. 水浸相控阵超声线阵列检测聚焦法则设置[J]. 压力容器, 2018, 35(5):73-77.
【9】杜清良, 周宇,徐宁,等.CIVA仿真在核电厂汽轮机相控阵超声检测中的应用[J].工程与试验,2020,60(1):10-11,20.
相关信息