搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
纳米Al2O3包覆空心玻璃微珠改性聚氨酯复合涂层的制备及其性能
          
Preparation of Nano Al2O3 Coated Hollow Glass Microspheres Modified Polyurethane Composite Coating and Its Performance

摘    要
采用杂化改性的方法将纳米Al2O3包覆到空心玻璃微珠(HGM)表面,制备了具有核-壳结构的的复合粉体,采用物理共混-喷涂工艺制备了包覆改性、硅烷改性和未改性的HGM聚氨酯基复合涂层,并研究了不同方法改性后的HGM及含量对复合涂层疏水性和拉伸性能的影响。结果表明:经表面改性后,HGM团聚现象减轻,其与基体间的界面结合力提高;包覆改性明显提高了HGM的表面粗糙度,水接触角由60.37°增大到118.35°;随填料含量的增加,复合涂层的水接触角逐渐增大,抗拉强度先增大后减小;当包覆改性的HGM含量为10%时,相较于未改性的HGM,复合涂层的水接触角由74.5°提高到90.3°,抗拉强度由2.07 MPa增加到2.5 MPa。
标    签 包覆改性   核-壳结构   界面性能   疏水性   抗拉强度   coating modification   core-shell structure   interface performance   hydrophobicity   tensile strength  
 
Abstract
Nano-Al2O3 was coated on the surface of hollow glass microspheres (HGM) by hybrid modification method, and composite powder with core-shell structure was prepared. Coating modified, silane modified and unmodified HGM polyurethane-based composite coatings were prepared by physical blending-spraying process. The effects of HGM modified by different methods and its content on the hydrophobicity and tensile properties of the composite coating were studied. The results showed that the agglomeration phenomenon of HGM after surface modification was alleviated. The interfacial adhesion with the substrate were improved. The coating modification significantly improved the surface roughness of HGM, the water contact angle increased from 60.37° to 118.35°. With the increase of filler content, the water contact angle of the composite coating increased, the tensile strength firstly increased and then decreased. When the coating modified HGM content was 10%, compared with the unmodified HGM, the water contact angle of composite coating increased from 74.5° to 90.3°, and the tensile strength increased from 2.07 MPa to 2.5 MPa.

中图分类号 TQ630.7   DOI 10.11973/fsyfh-202303011

 
  中国光学期刊网论文下载说明


所属栏目 试验研究

基金项目 第三批智汇郑州·1125聚才计划-创新紧缺人才(郑政[2018]-45号-15)

收稿日期 2022/10/21

修改稿日期

网络出版日期

作者单位点击查看


引用该论文: ZHANG Ruizhu,ZHANG Zhifang,BAO Zhongbao. Preparation of Nano Al2O3 Coated Hollow Glass Microspheres Modified Polyurethane Composite Coating and Its Performance[J]. Corrosion & Protection, 2023, 44(3): 73


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】YANG J P,CHEN L,GU X B,et al. Hollow glass microspheres/silicone rubber composite materials toward materials for high performance deep in situ temperature-preserved coring[J]. Petroleum Science,2022,19(1):309-320.
 
【2】SONG L,ZONG L S,WANG J Y,et al. Preparation and performance of HGM/PPENK-based high temperature-resistant thermal insulating coatings[J]. Chinese Journal of Polymer Science,2021,39(6):770-778.
 
【3】韩煦,王雷磊,王磊,等. α-Fe2O3改性空心玻璃微球/ZnIn2S4复合催化剂的制备及增强型光催化性能[J]. 硅酸盐学报,2020,48(7):1097-1106.
 
【4】BAI C Y,SHAO J H,LI X Y,et al. Fabrication and properties of slag-based geopolymer syntactic foams containing hollow glass microspheres[J]. Materials Letters,2022,308:131158.
 
【5】KANGO S,KALIA S,CELLI A,et al. Surface modification of inorganic nanoparticles for development of organic-inorganic nanocomposites-a review[J]. Progress in Polymer Science,2013,38(8):1232-1261.
 
【6】IMRAN M,RAHAMAN A,PAL S. Effect of low concentration hollow glass microspheres on mechanical and thermomechanical properties of epoxy composites[J]. Polymer Composites,2019,40(9):3493-3499.
 
【7】LIU Y,ZHAO Z B,SHAO Y W,et al. Preparation of a superhydrophobic coating based on polysiloxane modified SiO2 and study on its anti-icing performance[J]. Surface and Coatings Technology,2022,437:128359.
 
【8】SAM E K,SAM D K,LV X M,et al. Recent development in the fabrication of self-healing superhydrophobic surfaces[J]. Chemical Engineering Journal,2019,373:531-546.
 
【9】YU F Y,GAO J,LIU C P,et al. Preparation and UV aging of nano-SiO2/fluorinated polyacrylate polyurethane hydrophobic composite coating[J]. Progress in Organic Coatings,2020,141:105556.
 
【10】董雨菲,马建中,刘超,等. SiO2的功能化改性及其与聚合物基体的界面研究进展[J]. 材料导报,2019,33(11):1910-1918.
 
【11】蓝敏杰,文庆珍,潘越,等. 含氟树脂接枝玻璃微珠(HGB)的制备与表征[J]. 表面技术,2021,50(6):193-198,205.
 
【12】TENG Y H,WANG Y F,SHI B Y,et al. Robust superhydrophobic surface fabrication by fluorine-free method on filter paper for oil/water separation[J]. Polymer Testing,2020,91:106810.
 
【13】张琳达,王浩伟,齐军,等. 纳米颗粒包覆ZrW2O8空心结构的制备和性能[J]. 材料研究学报,2015,29(10):773-778.
 
【14】汪明球,杜仕国,闫军,等. 纳米TiO2/玻璃微珠复合耐磨涂层的制备及其分形特征[J]. 硅酸盐学报,2011,39(11):1850-1856.
 
【15】王彩丽,王静,杨润全,等. 核壳结构粉煤灰基复合粉体制备及填充聚合物的性能[J]. 高分子材料科学与工程,2020,36(8):87-92.
 
【16】HU G J,XIAO Y X,YING J. Nano-SiO2 and silane coupling agent Co-decorated graphene oxides with enhanced anti-corrosion performance of epoxy composite coatings[J]. International Journal of Molecular Sciences,2021,22(20):11087.
 
【17】李军伟. 稀土改性空心玻璃微珠复合材料的微观结构及性能研究[D]. 天津:天津大学,2012.
 
【18】GUO Y B,ZHANG Z,CAO Z Q,et al. Wear behavior of hollow glass beads (HGB) reinforced nitrile butadiene rubber:effects of silane coupling agent and filler content[J]. Materials Today Communications,2019,19:366-373.
 
【19】汪波,黄赤,黄志雄,等. 不同偶联剂对空心玻璃微球/酚醛复合泡沫塑料界面性能的影响[J]. 材料研究学报,2016,30(3):209-219.
 
【20】AHANGARAN F,NAVARCHIAN A H. Recent advances in chemical surface modification of metal oxide nanoparticles with silane coupling agents:a review[J]. Advances in Colloid and Interface Science,2020,286:102298.
 
【21】LI R,FAN G S,WANG P,et al. Effects of silane coupling agent modifications of hollow glass microspheres on syntactic foams with epoxy matrix[J]. Polymers and Polymer Composites,2021,29(9_suppl):S1191-S1203.
 
【22】秦凤鸣,李香玉,王锦艳,等. 有机硅改性聚氨酯/纳米SiO2复合超疏水涂层的制备[J]. 高分子学报,2021,52(9):1165-1173.
 
【23】CAI Q,HUANG J M,WENG R,et al. Preparation and surface properties of silicon-containing waterborne polyurethane functionalized with fluorine-containing acrylate and micro-nano silica[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2018,33(1):233-241.
 
【24】ALBOZAHID M,NAJI H Z,ALOBAD Z K,et al. Enhanced mechanical,crystallisation and thermal properties of graphene flake-filled polyurethane nanocomposites:the impact of thermal treatment on the resulting microphase-separated structure[J]. Journal of Polymer Research,2021,28(8):302.
 
【25】CHENG B X,GAO W C,REN X M,et al. A review of microphase separation of polyurethane:characterization and applications[J]. Polymer Testing,2022,107:107489.
 
【26】郭豪,贾非,陈琰霏,等. 应变速率对硬质聚氨酯准静态拉伸行为的影响[J]. 材料导报,2022,36(5):216-219.
 
【27】WANG X,WANG P P,JIANG Y,et al. Facile surface modification of silica nanoparticles with a combination of noncovalent and covalent methods for composites application[J]. Composites Science and Technology,2014,104:1-8.
 
相关信息
   标题 相关频次
 纳米Al2O3掺杂酚醛/环氧复合涂层的耐腐蚀性能
 6
 2A70铝合金搅拌摩擦焊接头抗拉强度测定结果的不确定度评定
 2
 3003铝合金薄板超高转速搅拌摩擦焊接头的组织与性能
 2
 304不锈钢室温抗拉强度测试的影响因素
 2
 7050铝合金表面氧化膜厚度对其搅拌摩擦焊焊接接头性能的影响
 2
 Al-Mg-Si系铝合金的成分设计
 2
 D406A钢和20钢异质接头的显微组织和力学性能
 2
 DH32船板钢埋弧焊接头的力学性能
 2
 DP590带钢屈服和抗拉强度的微磁定量预测
 2
 Er含量对汽车发动机用AM50合金组织与耐蚀性的影响
 2
 IF热轧钢板拉伸试验结果的测量不确定度评定
 2
 P110石油套管水压试验开裂原因分析
 2
 Q235钢抗拉强度测量不确定度评定
 2
 SG90T-9C高强韧性渣气联保药芯焊材的研发
 2
 SiC和WS2颗粒协同改性铜/聚酰亚胺树脂基复合材料的摩擦磨损性能
 2
 Ti2AlNb合金的高温拉伸变形行为
 2
 ZG06Cr13Ni4Mo不锈钢材料抗拉强度与布氏硬度的关系
 2
 板对接接头拉伸试样几何尺寸对其抗拉强度的影响
 2
 标距对电工圆铜线拉力试验结果的影响
 2
 玻璃钢抽油杆断裂原因分析
 2
 薄板熔化焊的最佳熔深
 2
 不同玻璃纤维单向增强树脂基复合材料的疲劳行为
 2
 不同形状搅拌头异种铝合金搅拌摩擦焊接头的性能
 2
 超长年限服役后铸铁烘缸的组织和性能
 2
 超声冲击处理对大厚度高强钢焊接接头抗拉强度的影响
 2
 电子线缆用Cu-0.5Ag合金微细线材软化温度的测定方法
 2
 短时过负荷对架空导线单线力学性能的影响
 2
 锻造温度对TA15钛合金显微组织及抗拉强度各向异性的影响
 2
 对GB/T 228.1-2010中拉伸试样制备的建议
 2
 防锈铝板/镀锌钢板异种金属冷金属过渡熔钎焊接头的组织与抗拉强度
 2