Phased array ultrasonic automatic analysis technology based on 3D imaging
摘 要
利用基于体绘制算法的三维成像方法,对相控阵超声原始检测数据进行三维重建;同时,在三维模型中基于聚类算法进行相关显示信号的识别,并根据标准要求进行测量和评判。设计了对接焊缝试块,利用试块数据对该成像方法进行了试验验证。试验结果表明,设计的自动分析系统能够直观显示缺陷的成像效果,响应速度快,识别及测量准确度高,相较于人工分析效率提升了3倍以上。
Abstract
The 3D imaging method based on volume rendering algorithm was used to reconstruct the original phased array ultrasonic testing data. At the same time, in the three-dimensional model, the relevant display signals were identified based on clustering algorithm, measured and evaluated according to the standard requirements. The butt weld test block was designed and tested by using the test block data. The result showed that the designed automatic analysis system can directly display the imaging effect, had fast response speed, high recognition and measurement accuracy. The efficiency of automatic analysis was more than 3 times higher than that of manual analysis.
中图分类号 TB559 TG115.28 DOI 10.11973/wsjc202306005
所属栏目 试验研究
基金项目 工信部“船舶建造焊缝质量数字化检测技术研究”项目(MC-202017-Z04)
收稿日期 2022/10/23
修改稿日期
网络出版日期
作者单位点击查看
备注吴昊(1982-),男,博士,高级工程师,主要研究方向为智能无损检测
引用该论文: WU Hao,TANG Jiaxing,GAO Yifei,QIAN Zhongyi. Phased array ultrasonic automatic analysis technology based on 3D imaging[J]. Nondestructive Testing, 2023, 45(6): 21~25
吴昊,唐嘉星,高翌飞,钱忠义. 基于三维成像的相控阵超声自动分析技术[J]. 无损检测, 2023, 45(6): 21~25
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】靳世久, 杨晓霞, 陈世利, 等.超声相控阵检测技术的发展及应用[J].电子测量与仪器学报, 2014, 28(9):925-934.
【2】王凡.三维超声成像技术在水电站压力管道灌浆检测中的应用[J].承德石油高等专科学校学报, 2019, 21(5):43-47, 81.
【3】周曾明.基于超声相控阵的低碳钢深度缺陷声场特征及三维可视化研究[D].成都:西南交通大学, 2021.
【4】高翌飞.基于MC算法的三维超声成像方法研究[J]. 远东无损检测新技术论坛先进技术论文集.2016(6):58-64.
【5】王凯.基于Tensorflow的超声相控阵图像缺陷识别研究[D].上海:上海工程技术大学, 2020.
【6】胡宏伟, 王泽湘, 王哲, 等.基于迭代法及腐蚀算法的超声相控阵缺陷提取[J].电子测量与仪器学报, 2015, 29(12):1765-1771.
【7】朱甜甜, 宋波, 毛捷, 等.基于深度学习的焊缝PAUT数据智能化分析方法[J].北京航空航天大学学报, 2022, 48(3):504-513.
【8】LORENSEN W E, JOHNSON C, KASIK D, et al.History of the marching cubes algorithm[J].IEEE Computer Graphics and Applications, 2020, 40(2):8-15.
【9】IGLESIAS-GUITIAN J A, MANE P, MOON B.Real-time denoising of volumetric path tracing for direct volume rendering[J].IEEE Transactions on Visualization and Computer Graphics, 2022, 28(7):2734-2747.
【2】王凡.三维超声成像技术在水电站压力管道灌浆检测中的应用[J].承德石油高等专科学校学报, 2019, 21(5):43-47, 81.
【3】周曾明.基于超声相控阵的低碳钢深度缺陷声场特征及三维可视化研究[D].成都:西南交通大学, 2021.
【4】高翌飞.基于MC算法的三维超声成像方法研究[J]. 远东无损检测新技术论坛先进技术论文集.2016(6):58-64.
【5】王凯.基于Tensorflow的超声相控阵图像缺陷识别研究[D].上海:上海工程技术大学, 2020.
【6】胡宏伟, 王泽湘, 王哲, 等.基于迭代法及腐蚀算法的超声相控阵缺陷提取[J].电子测量与仪器学报, 2015, 29(12):1765-1771.
【7】朱甜甜, 宋波, 毛捷, 等.基于深度学习的焊缝PAUT数据智能化分析方法[J].北京航空航天大学学报, 2022, 48(3):504-513.
【8】LORENSEN W E, JOHNSON C, KASIK D, et al.History of the marching cubes algorithm[J].IEEE Computer Graphics and Applications, 2020, 40(2):8-15.
【9】IGLESIAS-GUITIAN J A, MANE P, MOON B.Real-time denoising of volumetric path tracing for direct volume rendering[J].IEEE Transactions on Visualization and Computer Graphics, 2022, 28(7):2734-2747.
相关信息