搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
低强度脉冲磁场下时效温度和时间对A356铝合金 组织和性能的影响
          
Effect of Aging Temperature and Time on Structure and Properties of A356 Aluminum Alloy under Low Intensity Pulse Magnetic Field

摘    要
对A356铝合金进行T6热处理,在时效时施加33 mT低强度脉冲磁场,研究了时效温度(175,185 ℃)和时效时间(50,60,70 min)对A356铝合金显微组织和力学性能的影响。结果表明:在脉冲磁场作用下时效后,A356铝合金的二次枝晶间距随时效温度升高或时效时间延长而减小,共晶硅的长径比随时效时间延长先减小后增大;时效温度为185 ℃时共晶硅的直径和长径比较175 ℃时有所增大,但其数量减少;在脉冲磁场作用下时效后,A356铝合金的抗拉强度和屈服强度随时效时间延长或时效温度升高而增大;A356铝合金的热处理工艺可改进为540 ℃固溶60 min+175 ℃时效70 min,时效时施加33 mT脉冲磁场,该工艺处理后铝合金的拉伸性能满足使用要求。
标    签 A356铝合金   时效热处理   低强度脉冲磁场   共晶硅   力学性能   A356 aluminum alloy   aging heat treatment   low intensity pulse magnetic field   eutectic silicon   mechanical property  
 
Abstract
T6 heat treatment was conducted on A356 aluminum alloy, whose aging process was carried out under 33 mT low intensity pulse magnetic field. The effects of aging temperature (175,185 ℃) and aging time (50, 60, 70 min) on the microstructure and mechanical properties of A356 aluminum alloy were studied. The results show that after aging under pulse magnetic field, the secondary dendrite spacing of A356 aluminum alloy decreased with the increase of aging temperature or aging time, and the aspect ratio of eutectic silicon decreased first and then increased with the increase of aging time. The size and aspect ratio of eutectic silicon at 185 ℃ aging temperature were higher than those at 175 ℃, but the quantity decreased. After aging under pulse magnetic field, the tensile strength and yield strength of A356 aluminum alloy increased with the increase of aging time or aging temperature. The improved heat treatment process for A356 aluminum alloy was solid solution at 540 ℃ for 60 min+aging at 175 ℃ for 70 min, and during aging applying 33 mT pulse magnetic field. Treated by this process, the tensile properties of the aluminum alloy met the reguirements.

中图分类号 TG146.2   DOI 10.11973/jxgccl202308005

 
  中国光学期刊网论文下载说明


所属栏目 试验研究

基金项目 内蒙古自治区科技计划项目(2021GG0096)

收稿日期 2022/4/4

修改稿日期 2023/4/19

网络出版日期

作者单位点击查看

联系人作者麻永林

备注潘浩(1993—),男,山东潍坊人,硕士研究生

引用该论文: PAN Hao,YANG Fan,GONG Meina,LIU Yongzhen,ZHOU Jinxin,HUANG Yuxin,MA Yonglin. Effect of Aging Temperature and Time on Structure and Properties of A356 Aluminum Alloy under Low Intensity Pulse Magnetic Field[J]. Materials for mechancial engineering, 2023, 47(8): 29~33
潘浩,杨帆,宫美娜,刘永珍,周金鑫,黄宇欣,麻永林. 低强度脉冲磁场下时效温度和时间对A356铝合金 组织和性能的影响[J]. 机械工程材料, 2023, 47(8): 29~33


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】COLOMBO M,GARIBOLDI E,MORRI A.Er addition to Al-Si-Mg-based casting alloy:Effects on microstructure,room and high temperature mechanical properties[J].Journal of Alloys and Compounds,2017,708:1234-1244.
 
【2】QIU K Q,WANG R C,PENG C,et al.Effect of individual and combined additions of Al-5Ti-B,Mn and Sn on sliding wear behavior of A356 alloy[J].Transactions of Nonferrous Metals Society of China,2015,25:3886-3892.
 
【3】TSAI Y C,CHOU C Y,LEE S L,et al.Effect of trace La addition on the microstructures and mechanical properties of A356(Al-7Si-0.35Mg) aluminum alloys[J].Journal of Alloys and Compounds,2009,487:157-162.
 
【4】王晨,姜文勇,冯义成,等.脉冲磁场对Al-12.6Si-1Cu合金组织的影响[J].特种铸造及有色合金,2016,36(3):302-305. WANG C,JIANG W Y,FENG Y C,et al.Effect of pulsed magnetic field on microstructure of Al-12.6Si-1Cu alloy[J].Special Casting & Nonferrous Alloys,2016,36(3):302-305.
 
【5】张磊,袁秀妹,尧军平.低压脉冲磁场对Al-12.4Si合金组织与力学性能的影响[J].特种铸造及有色合金,2013,33(11):1074-1077. ZHANG L,YUAN X M,YAO J P.Effects of low voltage pulsed magnetic field(LVPMF) on microstructure and mechanical properties of Al-12.4Si alloy[J].Special Casting & Nonferrous Alloys,2013,33(11):1074-1077.
 
【6】李腾,傅明喜,陈斌,等.脉冲磁场处理对(Fe74Ga2P9.65B4.6Si3C6.75)98Nb2结构及性能的影响[J].热加工工艺,2018,47(10):79-81. LI T, FU M X, CHEN B, et al. Effects of pulse magnetic field treatment on structure and property of (Fe74Ga2P9.65B4.6Si3C6.75)98Nb2[J].Hot Working Technology,2018,47(10):79-81.
 
【7】赵作福,刘亮,齐锦刚,等.脉冲磁场作用下Al-5%Cu合金的时效机理[J].金属热处理,2016,41(5):113-116. ZHAO Z F,LIU L,QI J G,et al.Aging mechanism of Al-5%Cu alloy under pulse magnetic field[J].Heat Treatment of Metals,2016,41(5):113-116.
 
【8】师亚洲,逯广平,高翌,等.脉冲磁场处理对7075铝合金性能及组织的影响[J].金属热处理,2021,46(9):159-164. SHI Y Z,LU G P,GAO Y,et al.Effect of pulsed magnetic field treatment on properties and microstructure of 7075 aluminum alloy[J].Heat Treatment of Metals,2021,46(9):159-164.
 
【9】白庆伟,麻永林,邢淑清,等.可控电磁能(CEME)时效处理下Al-Zn-Mg-Cu合金的析出及强化机理研究[J].材料导报,2021,35(20):20143-20148. BAI Q W,MA Y L,XING S Q,et al.Precipitation and strengthening mechanism of Al-Zn-Mg-Cu alloy under controllable electromagnetic energy (CEME) aging treatment[J].Materials Review,2021,35(20):20143-20148.
 
【10】ZHANG K C,LI H Z,LIANG X P,et al.Effect of aging time on discontinuous precipitates,continuous precipitates and mechanical properties of AZ80A magnesium alloy[J].Transactions of Nonferrous Metals Society of China,2022,32(9):2838-2851.
 
【11】朱景川,来忠红.固态相变原理[M].北京:科学出版社,2010. ZHU J C,LAI Z H.Solid-state phase transition principle[M].Beijing:Science Press,2010.
 
【12】白英龙,吴冲浒,杨霞,等.实际初始WC颗粒尺寸选择的LSW理论分析[J].粉末冶金材料科学与工程,2012,17(2):139-146. BAI Y L,WU C H,YANG X,et al.LSW theory analysis on size selection for initial WC particles[J].Materials Science and Engineering of Powder Metallurgy,2012,17(2):139-146.
 
【13】ZHU M,JIAN Z Y,YANG G C,et al.Effects of T6 heat treatment on the microstructure,tensile properties,and fracture behavior of the modified A356 alloys[J].Materials and Design,2012,36:243-249.
 
相关信息
   标题 相关频次
 喷射沉积大尺寸犃356铝合金管坯的组织与性能
 4
 用非晶合金细化变质处理A356铝合金的显微组织和力学性能
 4
 06Cr19Ni10不锈钢/A283低碳钢扩散焊接接头的显微组织和力学性能
 2
 06Cr20Ni11钢埋弧焊焊缝的显微组织和性能
 2
 1 000 MW核电汽轮机空心螺栓断裂原因分析
 2
 1.25Cr0.5MoSi钢的焊接工艺评定
 2
 1060工业纯铝累积叠轧后的力学性能
 2
 1060铝在累积轧制中组织和性能的演变
 2
 10Ni5CrMoV钢MAG焊接接头的显微组织与力学性能
 2
 12Cr13钢预热处理工艺参数优化
 2
 12Cr1MoV钢过热器爆管的显微组织和力学性能
 2
 14NiCrMo10 6V与Q345E钢过渡匹配焊接接头的组织与力学性能
 2
 15Ni3CrMoV与10Ni5CrMoV异种钢对接接头的显微组织及力学性能
 2
 16Mo3钢大直径大变形量试制中频弯管的组织与性能
 2
 2 000 t水压机立柱断裂分析
 2
 2024铝合金电子束焊接接头的显微组织与力学性能
 2
 20Cr1Mo1VTiB钢制高温紧固螺栓断裂失效分析
 2
 20Cr钢与B级钢焊接接头的组织和性能
 2
 2195铝锂合金的化学铣切工艺优化
 2
 2205双相不锈钢/Q345低合金钢爆炸复合板的组织与力学性能
 2
 22Mn2SiVBS热轧无缝钢管控冷时的组织与性能
 2
 240 MPa级高强IF钢的冷轧压下率和退火温度
 2
 25Cr2MoVA钢调质规范对力学性能的影响
 2
 2GPa高压处理对铜铝合金显微组织和性能的影响
 2
 300 MW机组锁口叶片断裂原因分析
 2
 3003铝合金无缝管制备过程中的显微组织与力学性能变化
 2
 3D打印18Ni300模具钢的显微组织及力学性能
 2
 40CrNi2Mo钢的低温力学性能
 2
 5 mm厚6005A-T6铝合金双轴肩搅拌摩擦焊接头的组织及性能
 2
 5 mm厚6082-T6铝合金双轴肩搅拌摩擦焊接头的组织与性能
 2