Comparison and analysis of computed radiography and film radiography in offshore engineering field
摘 要
随着射线检测技术的不断发展以及对环保要求的不断提高,CR计算机射线照相检测技术在各领域得到了广泛应用。为了解CR技术和射线胶片检测技术的异同,在理论和试验的基础上,针对海洋工程领域的射线检测工作(主要为管线焊缝),在原理、环保、工效、再射率和缺陷检测等方面,展开了CR技术与射线胶片检测技术的对比分析。结果表明,相比射线胶片检测技术,CR技术在环保、工效和再射率方面均有一定的优势。
Abstract
With the development of radiographic testing and the higher requirement to environmental protection, computed radiography (CR) has been widely used in various industrial fields. In order to analyze the similarities and differences between computed radiography and film radiography, in this paper, the comparison and analysis of computed radiography and film radiography in offshore engineering field (mainly radiography for piping welds) were carried out basically on the theoretically and experimentally in the aspects of principle, environmental protection, working efficiency, retake rate and defects detection. The results showed that compared with film radiography, computed radiography had some advantages in environmental protection, work efficiency and retake rate.
中图分类号 TG115. 28 DOI 10.11973/wsjc202309001
所属栏目 试验研究
基金项目
收稿日期 2023/1/19
修改稿日期
网络出版日期
作者单位点击查看
备注刘立胜(1984-),男,工程师,主要从事无损检测的研究工作
引用该论文: LIU Lisheng,LIAO Liangjin,LI Jiang,LIU Guiji,WU Ding. Comparison and analysis of computed radiography and film radiography in offshore engineering field[J]. Nondestructive Testing, 2023, 45(9): 1~4
刘立胜,廖良进,李江,刘贵吉,武丁. 海洋工程领域数字射线CR与射线胶片检测技术的对比分析[J]. 无损检测, 2023, 45(9): 1~4
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】梁世蒙,高海良,赵广波,等. 数字化射线检测技术在船舶领域的应用[J]. 无损检测,2020,42(2):25-31.
【2】张宏亮,祁正,陈秀岩,等. CR及DR射线检测技术在长输管道中的应用实效对比[J]. 无损检测,2013,35(10):35-37,44.
【3】刘贵吉,于德军,李江. 焊缝超声相控阵检测工艺参数的选择[J]. 无损检测,2017,39(11):68-70,73.
【4】郑世才. 数字射线无损检测技术[M]. 北京:机械工业出版社,2012.
【5】孙忠诚. 射线数字成像技术[M]. 北京:机械工业出版社,2018.
【2】张宏亮,祁正,陈秀岩,等. CR及DR射线检测技术在长输管道中的应用实效对比[J]. 无损检测,2013,35(10):35-37,44.
【3】刘贵吉,于德军,李江. 焊缝超声相控阵检测工艺参数的选择[J]. 无损检测,2017,39(11):68-70,73.
【4】郑世才. 数字射线无损检测技术[M]. 北京:机械工业出版社,2012.
【5】孙忠诚. 射线数字成像技术[M]. 北京:机械工业出版社,2018.
相关信息