Reasons Discussion on Unqualified Impact Properties of 1Cr11Ni2W2MoV Stainless Steel
摘 要
通过对99件成分存在波动的1Cr11Ni2W2MoV不锈钢经不同温度回火后的力学性能进行统计分析, 探讨了该钢经常出现冲击性能不合格的原因。结果表明: 造成该钢冲击性能不合格的原因主要是化学成分的波动和回火温度偏低, 将回火温度提高至680~710 ℃可以有效提高该钢冲击性能的一次合格率。
Abstract
The impact properties unqualified reasons of 1Cr11Ni2W2MoV stainless steel were discussed by statistically analyzing the mechanical properties of 99 pieces of specimens which had a certain chemical compositions fluctuation after tempering at different temperature. The results show that the main reasons for the unqualified impact properties were the chemical compositions fluctuation and the lower tempering temperature. Raising the tempering temperature to 680-710 ℃ could effectively improve the impact properties passing rate of 1Cr11Ni2W2MoV stainless steel.
中图分类号 TG113.25 TG142.1
所属栏目 质量控制与失效分析
基金项目
收稿日期 2013/8/29
修改稿日期
网络出版日期
作者单位点击查看
备注徐杏杏(1987-),女,助理工程师, 硕士。
引用该论文: XU Xing-xing,HE Jun-gang,HU Kai,HOU Chun-mei,ZHAO Cheng-cheng,WU Nan,ZHANG Tai-jin. Reasons Discussion on Unqualified Impact Properties of 1Cr11Ni2W2MoV Stainless Steel[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2014, 50(8): 596~598
徐杏杏,何军刚,胡锴,侯春梅,赵成成,吴楠,张太金. 1Cr11Ni2W2MoV不锈钢冲击性能不合格原因探讨[J]. 理化检验-物理分册, 2014, 50(8): 596~598
被引情况:
【1】陈晓泉, "容器钢低温韧度偏低的原因分析",理化检验-物理分册 51, 466-469(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】钟培道. 淬火冷速对1Cr11Ni2W2MoV钢组织与性能的影响[J]. 航空材料, 1984(4):25-29.
【2】陈宗霖,王少刚,陈桂梅,等. 1Cr11Ni2W2MoV钢及其零部件的第二回火脆性与韧性[J]. 航空制造工程, 1994(4):15-18.
【3】王蓉严,隽民. 1Cr11Ni2W2MoV钢长期时效时组织性能的变化[J]. 材料工程, 1992(2):8-11.
【4】陈宗霖,姜照群,王少刚. 晶界富集元素和沉淀相对1Cr11Ni2W2MoV钢性能的影响[J]. 材料工程, 1994(Z1):1-3,23
【5】严隽民,王象,韩栋,等. 1Cr11Ni2W2MoV钢的回火转变[J]. 钢铁,1990(4):52-55.
【2】陈宗霖,王少刚,陈桂梅,等. 1Cr11Ni2W2MoV钢及其零部件的第二回火脆性与韧性[J]. 航空制造工程, 1994(4):15-18.
【3】王蓉严,隽民. 1Cr11Ni2W2MoV钢长期时效时组织性能的变化[J]. 材料工程, 1992(2):8-11.
【4】陈宗霖,姜照群,王少刚. 晶界富集元素和沉淀相对1Cr11Ni2W2MoV钢性能的影响[J]. 材料工程, 1994(Z1):1-3,23
【5】严隽民,王象,韩栋,等. 1Cr11Ni2W2MoV钢的回火转变[J]. 钢铁,1990(4):52-55.
相关信息