Magnetic Field Detecting Method of Cracks in Aluminum and Copper Plates
摘 要
针对非铁磁性金属材料自动化无损探伤需求,提出一种采用直流电激励工件和霍尔元件测量裂纹上磁场的检测方法。霍尔元件非接触测量工件表面附近区域磁场变化,通过信号处理获得工件裂纹信息。通过试验,分析探伤原理,初步研究了激励电流密度、刻伤深度、刻伤位置对所探测到信号的影响。试验结果表明这种检测方法具有与漏磁检测类似的特点,不仅能探测到非铁磁性金属材料的表面裂纹,也能探测其内部裂纹,在自动化和快速探伤中应用前景显著。
Abstract
A method was proposed for the needs of automatic NDT of non-ferromagnetic material, which measured the magnetic field induced by DC current flow with integrated hall elements. The hall elements detected the variation of magnetic field in the air near the surface of the material non-contactly, and then the signals were processed to obtain the information of the flaws. The experiment analyzed the principle of the method and studied the influence factors to the measured signals, which were the excitation current density, the depth and location of the cracks. The result showed that the method, which had the similar characteristics to the magnetic flux leakage testing method, could detect the flaw not only on the surface, but also in the material. Therefore, the application of the method was significant respect in automatic and rapid testing in future.
中图分类号 TG115.28
所属栏目 科研成果与学术交流
基金项目
收稿日期 2010/8/4
修改稿日期
网络出版日期
作者单位点击查看
备注康宜华(1965-),男,教授,主要从事无损检测技术及仪器方面的研究工作。
引用该论文: KANG Yi-Hua,TAN Cun-Zhen,SONG Kai,SUN Yan-Hua. Magnetic Field Detecting Method of Cracks in Aluminum and Copper Plates[J]. Nondestructive Testing, 2011, 33(5): 15~18
康宜华,谈存真,宋凯,孙燕华. 铝板和铜板裂纹磁场检测法[J]. 无损检测, 2011, 33(5): 15~18
被引情况:
【1】周德强,吴佳龙,王俊,过雪东,尤丽华, "基于磁屏蔽的脉冲涡流缺陷检测仿真",无损检测 36, 14-17(2014)
【2】张继楷,杨芸,康宜华,雷啸锋, "TMR传感器及其在电磁检测中的应用",无损检测 38, 36-39(2016)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】Saka M, Sato I, Abé H. NDE of a 3-D surface crack using magnetic field induced by DC current flow[J]. NDT&E International,1998,31(5):325-328.
【2】马国栋.电线电缆载流量[M].北京:中国电力出版社,2003:5.
【3】SDGJ 14-86导体和电器选择设计技术规定[S].
【2】马国栋.电线电缆载流量[M].北京:中国电力出版社,2003:5.
【3】SDGJ 14-86导体和电器选择设计技术规定[S].
相关信息