Applicability of Tungsten Nickel Alloy Coated Tubing
摘 要
为研究钨镍合金镀层防腐蚀技术在酸性气井油管上应用的可行性, 在P110S挂片试样表面及油管内壁电镀一种钨镍合金镀层, 对镀层试样进行模拟高含H2S和CO2环境中的耐腐蚀性能评价, 同时对钨镍合金镀层油管进行上卸扣及密封性能的实物试验评价。高温高压釜模拟腐蚀试验结果表明, 钨镍合金镀层试片在高含H2S高含CO2的油气井模拟工况下具有较好的耐蚀性能;硫化物应力腐蚀开裂试验表明, 该镀层不影响基体材质的抗硫化物应力开裂性能。基于ISO 13679标准的实物试验结果表明, 钨镍合金镀层可以用在特殊油管接头上, 其具有良好的抗粘扣性能, 且不影响密封性能。
Abstract
In order to study the feasibility of tungsten nickel alloy coating used as an anti-corrosion technology for the sour gas well tubing, tungsten nickel alloy coating was prepared on the surfaces and inner wall of P110S tubing. Anti-corrosion performance and connection performance of tubing joints were evaluated by test simulating high concentration H2S and CO2 environment and field test respectively. The results of autoclave simulation tests showed that tungsten nickel alloy coating had good corrosion resistance in high H2S and CO2 gas well environments. The results of sulfide stress cracking (SSC) tests showed that the coating did not affect the base material resistance to SSC. Full scale tests of tubing joints based on ISO 13679 standard showed that tungsten nickel alloy coating exhibited excellent anti-galling performance and had no influence on the sealing performance.
中图分类号 TG174
所属栏目 应用技术
基金项目
收稿日期 2014/3/31
修改稿日期
网络出版日期
作者单位点击查看
备注宋中华(1968-), 高级工程师, 硕士, 从事采油工程及相关技术应用研究, 13709957676.
引用该论文: SONG Zhong-hua,ZHANG Shi-cheng,ZHOU Li-zhi,CAI Rui,XIE Jun-feng,CHANG Ze-liang. Applicability of Tungsten Nickel Alloy Coated Tubing[J]. Corrosion & Protection, 2014, 35(12): 1256
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】NACE MR0175Petroleum and natural gas industries-materials for use in H2S-containing environments in oil and gas production[S].
【2】陈艳芳,陈峰,苌清华,等. pH对镍钨合金镀层电镀质量的影响[J]. 南方金属,2009,4:12-13,17.
【3】雷丹,林琳,张国超,等. 电沉积钨合金镀层的研究现状与应用进展[J]. 全面腐蚀控制,2012(6):2-6,38.
【4】侯铎,施太和,曾德智,等. 电镀钨合金镀层组织及其耐腐蚀性能研究[J]. 材料导报B,2012,26(5):12-15.
【5】苏志俊,袁庆龙,曹晶晶. 电刷镀镍钨合金层的抗高温软化性能[J]. 材料保护,2010,43(1):71-73.
【6】周俊,张颖,何凤姣,等. 电镀不同钨合金抽油杆的耐盐水腐蚀性及力学性能[J]. 电镀与涂饰,2010,29(10):1-4.
【7】周俊,王秀敏,何凤姣,等. 电镀钨合金抽油杆耐硫化氢腐蚀研究[J]. 电镀与涂饰,2009,28(10):4-8.
【8】龙媛媛,许卫国,张洁,等. 钨基非晶合金镀层对油套管用钢的防蚀阻垢性能[J]. 腐蚀与防护,2010,31(4):316-317.
【2】陈艳芳,陈峰,苌清华,等. pH对镍钨合金镀层电镀质量的影响[J]. 南方金属,2009,4:12-13,17.
【3】雷丹,林琳,张国超,等. 电沉积钨合金镀层的研究现状与应用进展[J]. 全面腐蚀控制,2012(6):2-6,38.
【4】侯铎,施太和,曾德智,等. 电镀钨合金镀层组织及其耐腐蚀性能研究[J]. 材料导报B,2012,26(5):12-15.
【5】苏志俊,袁庆龙,曹晶晶. 电刷镀镍钨合金层的抗高温软化性能[J]. 材料保护,2010,43(1):71-73.
【6】周俊,张颖,何凤姣,等. 电镀不同钨合金抽油杆的耐盐水腐蚀性及力学性能[J]. 电镀与涂饰,2010,29(10):1-4.
【7】周俊,王秀敏,何凤姣,等. 电镀钨合金抽油杆耐硫化氢腐蚀研究[J]. 电镀与涂饰,2009,28(10):4-8.
【8】龙媛媛,许卫国,张洁,等. 钨基非晶合金镀层对油套管用钢的防蚀阻垢性能[J]. 腐蚀与防护,2010,31(4):316-317.
相关信息