Some Considerations on Tensile Testing Standard of Metallic Materials
摘 要
基于对GB/T 228金属材料室温拉伸试验方法的深入分析, 并结合笔者多年从事金属材料力学性能测试的实际工作经验, 对我国标准的编制提出了三点合理化建议。指出了GB/T 228.1-2010中方法A与方法B关于拉伸速率的规定不一致的问题。同时建议对拉伸试验的测量不确定度评定方法进行修订, 以增强其可操作性。最后建议对有色金属拉伸试验开展进一步深入研究, 在标准再次修订时增加针对有色金属拉伸试验速率的规定。
Abstract
Based on the in-depth analysis on GB/T 228 standard for tensile testing methods of metallic materials at ambient temperature and combined with many years actual work experience in metal materials mechanics performance testing of the author, three reasonable suggestions on standard development in China had been proposed. The inconsistency between method A and method B regarding tensile rate in GB/T 228.1-2010 had been pointed out. At the same time, it was recommended to modify the measurement uncertainty evaluation method of the tensile test, so that it could improve its operability. Finally, further research should be done to make a scientific definition on the strain rate for non-ferrous materials in the future revised standard.
中图分类号 TG115.5+2
所属栏目 专题报道
基金项目
收稿日期 2014/4/21
修改稿日期
网络出版日期
作者单位点击查看
备注叶宏德(1963-), 男, 高级工程师。
引用该论文: YE Hong-de. Some Considerations on Tensile Testing Standard of Metallic Materials[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2014, 50(6): 394~395
叶宏德. 对金属材料拉伸试验方法标准的几点思考[J]. 理化检验-物理分册, 2014, 50(6): 394~395
被引情况:
【1】乐金涛,李玲,刘乐, "对拉伸试验方法标准GB/T228.1-2010的思考",理化检验-物理分册 51, 83-86(2015)
【2】孔令峰,葛俊森,冯涛, "试验速率对锚杆杆体力学性能的影响",理化检验-物理分册 52, 778-780(2016)
【3】周隐玉,王 飞,薛 春, "3D打印18Ni300模具钢的显微组织及力学性能",理化检验-物理分册 52, 243-246(2016)
【4】李和平, "关于拉伸试验标准GB/T 228.1-2010主要争论问题的探讨",理化检验-物理分册 52, 597-602(2016)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB 228-1987金属拉伸试验方法[S].
【2】GB/T 228-2002金属材料 室温拉伸试验方法[S].
【3】GB/T 228.1-2010金属材料 拉伸试验 第1部分: 室温试验方法[S].
【4】王承忠. 测量不确定度基本原理和评定方法及在材料检测中的评定实例 第二讲 测量不确定度的评定方法(A类标准不确定度的评定)[J]. 理化检验-物理分册, 2013, 49(10):668-673.
【2】GB/T 228-2002金属材料 室温拉伸试验方法[S].
【3】GB/T 228.1-2010金属材料 拉伸试验 第1部分: 室温试验方法[S].
【4】王承忠. 测量不确定度基本原理和评定方法及在材料检测中的评定实例 第二讲 测量不确定度的评定方法(A类标准不确定度的评定)[J]. 理化检验-物理分册, 2013, 49(10):668-673.
相关信息