工业CT在喷管逆向重构中的应用
The Application of Industrial CT Technology in Reversing Engineering of Nozzle
摘 要
介绍了工业CT技术在逆向工程中的应用，通过对逆向工程方法的分析，提出了利用工业CT断层扫描技术对喷涂用喷管进行原始数据获取，然后经过边界提取与结构分析来精确测量喷管内部的尺寸变化，并制定出一系列的技术方案，从而保证喷涂喷管内部尺寸数据的安全性和可靠性。
逆向工程
内部尺寸
Industrial CT scanning
Reversing engineering
Inner dimensions
Abstract
Dedicated to the reverse engineering application, this paper discusses the general principle of ICT method and analyzes the method of boundary extraction and structural analysis of typical product (nozzle). Then the changes of inner dimensions were achieved to make research approach. At last, this experiment was carried out to make sure the safety and reliability of nozzle when using the inner dimension date.
中图分类号 TG115.28
所属栏目 试验研究
基金项目 宁波市科技创新团队资助项目(2011B82011)
收稿日期 2013/4/18
修改稿日期
网络出版日期
作者单位点击查看
备注王晓艳(1966-)，女，实验师，主要从事工业CT无损检测技术相关研究工作。
引用该论文: WANG Xiao-yan,Qi Zi-cheng,TANG Sheng-ming,ZHANG Wei-guo,LIU Zi-yu,ZHAO Li-wei. The Application of Industrial CT Technology in Reversing Engineering of Nozzle[J]. Nondestructive Testing, 2014, 36(1): 24～26
王晓艳,齐子诚,唐盛明,张维国,刘子瑜,赵立伟. 工业CT在喷管逆向重构中的应用[J]. 无损检测, 2014, 36(1): 24～26
被引情况:
【1】董方旭,王从科,凡丽梅,赵付宝,李金鹿,张霞,郑素萍, "X射线检测技术在复合材料检测中的应用与发展",无损检测 38, 67-72(2016)
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】SAKAKI K, SHIMIZU Y. Improvement in wire arc spray by supersonic cold gas jet［C］∥Thermal Spray 2001: New Surfaces for a New Millennium. OH USA: ASM International, Materials Park,2001:441-445.
【2】WANG X, HEBERLEIN J, PFENDER E, et al. Effect of nozzle configuration,gas pressure,and gas type on coating properties in wire arc spray［J］. Journal of Thermal Spray Technology,1999,8(4):565-575.
【3】LIAO H L, ZHU Y L, BOLOT R, et al. Size distribution of particles from individual wires and effects of nozzle geometry in twin wire arc spraying［J］. Surface and Coating Technology,2005,200:2123-2130.
【4】方新，费仁元.零件工业CT成面数据研究［J］.现代制造工程，2003(8):69-70.
【5】刘庆民，王龙山，陈向伟，等.滚珠丝杠副内螺纹的图像测量［J］.中国机械工程,2005,16(15):1328-1331.
【2】WANG X, HEBERLEIN J, PFENDER E, et al. Effect of nozzle configuration,gas pressure,and gas type on coating properties in wire arc spray［J］. Journal of Thermal Spray Technology,1999,8(4):565-575.
【3】LIAO H L, ZHU Y L, BOLOT R, et al. Size distribution of particles from individual wires and effects of nozzle geometry in twin wire arc spraying［J］. Surface and Coating Technology,2005,200:2123-2130.
【4】方新，费仁元.零件工业CT成面数据研究［J］.现代制造工程，2003(8):69-70.
【5】刘庆民，王龙山，陈向伟，等.滚珠丝杠副内螺纹的图像测量［J］.中国机械工程,2005,16(15):1328-1331.
相关信息
