Requirement of UT Weld Qualification Examinations for Specimens Discontinuities in ISO 9712:2012
摘 要
描述了ISO 9712:2012标准中超声检测人员资格鉴定考试对焊缝超声考试试样不连续的要求, 与当前国内其他在用的标准规范要求进行了对比分析, 提出了作为用来考核考生能力的考试试样, 其本身应具有一定的可靠性和重复性的观点。在标准要求的基础上, 建立与国际接轨的高水准要求, 为最终实现无损检测人员资格证书的全球互认创造条件, 同时希望对国内同行资格鉴定机构提供有益的帮助。
Abstract
The requirement for specimen discontinuities in UT testing qualification examinations according to ISO 9712:2012 was descirbed in this article. Comparisons were made between this requirement and others used in local standards and norms. It was proposed that the examination specimens must be of high reliability and repeatability due to its role in qualifying the NDT candidates. Based on the requirement of ISO 9712:2012, a high level of requirement was built up to create conditions for promoting the global mutual recognition of NDT personnel. We hope this article can be of benefit for other local Qualficaiton Bodies.
中图分类号 TG115.28
所属栏目 教育培训
基金项目
收稿日期 2014/5/8
修改稿日期
网络出版日期
作者单位点击查看
备注丁伟臣(1974-), 男, 学士, 工程师, 德国发证机构SECTOR Cert授权考官, 主要从事根据欧标EN ISO 9712标准的无损检测培训及考核工作。
引用该论文: DING Wei-chen. Requirement of UT Weld Qualification Examinations for Specimens Discontinuities in ISO 9712:2012[J]. Nondestructive Testing, 2014, 36(9): 90~95
丁伟臣. ISO 9712:2012标准中焊缝超声考试对试样不连续的要求[J]. 无损检测, 2014, 36(9): 90~95
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】ISO 9712:2012 Non-destructive testingQualification and certification of NDT personnel[S].
【2】ISO/TS 22809:2007 Non-destructive testingDiscontinuities in specimens for use in qualification examinations[S].
【3】EN ISO 17640:2010 Non-destructive testing of weldsUltrasonic testingTechniques, testing levels, and assessment[S].
【4】庄志强, 丁杰, 姜炜.新版GB/T 11345标准的主要内容及旧版本的比较[J].无损检测, 2013, 35(6): 63-65, 68.
【5】EN ISO 1166:2010 Non-destructive testing of weldsUltrasonic testingAcceptance levels[S].
【6】ISO 17635:2010 Non-destructive testing of weldsGeneral rules for metallicMaterials[S].
【2】ISO/TS 22809:2007 Non-destructive testingDiscontinuities in specimens for use in qualification examinations[S].
【3】EN ISO 17640:2010 Non-destructive testing of weldsUltrasonic testingTechniques, testing levels, and assessment[S].
【4】庄志强, 丁杰, 姜炜.新版GB/T 11345标准的主要内容及旧版本的比较[J].无损检测, 2013, 35(6): 63-65, 68.
【5】EN ISO 1166:2010 Non-destructive testing of weldsUltrasonic testingAcceptance levels[S].
【6】ISO 17635:2010 Non-destructive testing of weldsGeneral rules for metallicMaterials[S].
相关信息