The Finite Element Simulation and Experimental Research for MFL Testing Model of Compound Excitation
摘 要
提出了一种新型的用于漏磁检测的复合励磁磁化模型。利用ANSYS有限元软件进行有限元仿真分析,分别改变安匝数、缺陷深度、缺陷大小等参量,获得缺陷处的漏磁场分布特性,并对模型进行了试验证。有限元结果与试验结果均表明: 多路并联复合励磁模型有效,并可用于钢板缺陷的检测。
Abstract
This paper proposes a new kind of compound excitation model which can be used for MFL. In this article,the number of ampere turns and the depth or size of the defects were separately changed and finite element simulation analysis was made by using the ANSYS software,and hence the leakage magnetic field distribution characteristics of the defect were acquired. The experimental study of the model was carried out,and experimental data were obtained. The finite element and experimental results show that the compound excitation model is effective,and can be used for defect detection in steel plates.
中图分类号 TG115.28
所属栏目 试验研究
基金项目 国家自然科学基金资助项目(11272084)
收稿日期 2014/5/4
修改稿日期
网络出版日期
作者单位点击查看
备注戴光(1954-),男,教授,博士生导师,主要从事化工机械和无损检测的教学和科研工作。
引用该论文: DAI Guang,WANG Xue-zeng,REN Yi. The Finite Element Simulation and Experimental Research for MFL Testing Model of Compound Excitation[J]. Nondestructive Testing, 2015, 37(1): 60~63
戴光,王学增,任毅. 新型复合励磁法漏磁检测有限元仿真与试验[J]. 无损检测, 2015, 37(1): 60~63
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】刘志平.基于有限元分析的储罐底板磁性检测与评价方法研究[D].武汉: 华中科技大学,2003: 24-30.
【2】林俊明.漏磁检测技术及发展现状研究[J].无损探伤,2006,30(1):1-5.
【3】戴光,崔巍,杨志军,等. 基于三维有限元的换热管缺陷漏磁场数值模拟[J].压力容器,2009,26(11):21-26.
【4】郑彪华,何 文,周松强,等. 管道缺陷漏磁检测的三维有限元仿真分析[J].中国安全科学学报,2013(12):35-41.
【5】高廷岩,于永亮,韩天宇,等. 有限元方法在管道外漏磁检测中的应用[J].无损检测,2013,35(11):31-34.
【6】张海燕,方晓艳,马小芳,等. 管道三维漏磁检测的有限元仿真应用[J].仪表技术与传感器,2012(11):163-165.
【2】林俊明.漏磁检测技术及发展现状研究[J].无损探伤,2006,30(1):1-5.
【3】戴光,崔巍,杨志军,等. 基于三维有限元的换热管缺陷漏磁场数值模拟[J].压力容器,2009,26(11):21-26.
【4】郑彪华,何 文,周松强,等. 管道缺陷漏磁检测的三维有限元仿真分析[J].中国安全科学学报,2013(12):35-41.
【5】高廷岩,于永亮,韩天宇,等. 有限元方法在管道外漏磁检测中的应用[J].无损检测,2013,35(11):31-34.
【6】张海燕,方晓艳,马小芳,等. 管道三维漏磁检测的有限元仿真应用[J].仪表技术与传感器,2012(11):163-165.
相关信息