Influence of Substrate Tensile Deformation on Performance of FBE Coating
摘 要
地震、滑坡等地质灾害会造成埋地钢质管道变形。本工作对管道防腐蚀熔结环氧粉末涂层(FBE涂层)试件, 在不同拉伸变形程度下的附着力、阴极剥离和冲击强度等性能进行了研究。结果表明, 拉伸变形对FBE涂层的附着力和阴极剥离性能影响显著, 随变形量增大, 性能明显降低; 在变形率不大于10%的条件下, FBE涂层的冲击强度仍能保持较好。
Abstract
Natural disasters such as earthquake and landslide are likely to form deformation of buried steel pipelines. The adhesion, cathodic stripping and impact strength of fusion bonded epoxy (FBE) coatings on buried steel pipelines under different substrate tensile deformation conditions were studied. The results showed that with the increase of substrate deformation, the adhesion and cathodic stripping performance of FBE coatings decreased obviously. The effect of substrate deformation on the impact strength was not obvious when the substrate tensile deformation was less than 10%.
中图分类号 TG174.46
所属栏目 试验研究
基金项目
收稿日期 2010/6/8
修改稿日期 2010/6/28
网络出版日期
作者单位点击查看
备注张其滨, 教授级高级工程师,
引用该论文: ZHANG Qi-bin,ZHANG Li,LI Ai-gui,XU Cui-zhu. Influence of Substrate Tensile Deformation on Performance of FBE Coating[J]. Corrosion & Protection, 2011, 32(4): 269
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】黄志潜. X80级管线钢在高压大流量输气管道上的应用与发展前景[J]. 焊管, 2005, 28(2):1-10.
相关信息