改性方法对WC基硬质合金刀具材料组织及性能的影响
Effect of Modification Methods on Microstructure and Properties of WC-Based Cemented Carbide Tool Materials
摘 要
采用真空烧结法制备了WC基硬质合金刀具材料, 研究了不同改性方法对其组织及性能的影响。结果表明: 粘结剂镍和钛代替镍提高了硬质合金刀具材料的硬度和抗弯强度, 大大降低了后刀面的磨损; 添加纳米SiCp使硬质合金刀具材料的组织更加均匀, 相对密度、硬度、抗压强度及耐磨性进一步提高; 粘结剂钴比镍对WC表面具有更好的润湿性, 可进一步提高硬质合金刀具材料的硬度; WC表面化学镀包覆粘结金属钴进一步提高了硬质合金刀具材料的整体性能。
硬质合金刀具
化学镀
耐磨性
nano-modification
cemented carbide tool
electoless plating
wear resistance
Abstract
The effects of different methods mechanism on microstructure and properties of WC-based cemented carbide tool materials prepared by vacuum sintering were studied. The results show that Ni-Ti replacing Ni as binder could improve the hardness and bending strength of the tool materials, the wear of flank surface reduced greatly. Adding nano-SiCp made the microstructure of the cemented carbide tool materials more homogeneous, and the density, hardness, compression strength, and wear-resistance be further improved. The hardness of the tool materials was enhanced because Co had better wettability with WC surface than Ni as binder, and electoless plating cladding Co on WC surface increased the overall performance of the tool materials.
中图分类号 TH117.3
所属栏目 纳米材料
基金项目 南通市应用研究项目(K2009021); 江苏省高校自然科学基金资助项目(10KJB460006)
收稿日期 2010/1/22
修改稿日期 2011/2/1
网络出版日期
作者单位点击查看
备注居志兰(1976-), 女, 江苏高邮人, 讲师, 博士研究生。
引用该论文: JU Zhi-lan,ZHU Yong-wei,ZHANG Hua,HUA Guo-ran. Effect of Modification Methods on Microstructure and Properties of WC-Based Cemented Carbide Tool Materials[J]. Materials for mechancial engineering, 2012, 36(2): 61～63
居志兰,朱永伟,张华,花国然. 改性方法对WC基硬质合金刀具材料组织及性能的影响[J]. 机械工程材料, 2012, 36(2): 61～63
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】AWAJI H, CHOI S M, YAGI E. Mechanisms of toughening and strengthening in ceramic-based nanocomposites [J].Mech Mater, 2002, 34:411-422.
【2】XU Yu-dong, LIU Ning, SHI Min, et al. Research progress of Ti(C, N) cements with nano modification [J].Cemented Carbides, 2005, 22(2):112-116.
【3】SALES W F, COSTA L A, SANTOS SC, et al. Performance of coated, cemented carbide, mixed-ceramic and PCBN-H tools when turning W320 steel[J].Int J Adv Manuf Technol, 2009, 41:660-669.
【4】ZHANG Xiao-bo, LIU Ning, LI Yong, et al. Mechanical properties and thermal shock resistance of nano modified Ti(C, N)-based cerements[J].Journal of the Chinese Ceramic Society, 2008, 36(4):503-509.
【5】章晓波, 刘宁, 陈焱, 等. 纳米TiN改性Ti(C, N)基金属陶瓷的组织和性能[J].中国有色金属学报, 2008, 18(7): 1280-1285.
【2】XU Yu-dong, LIU Ning, SHI Min, et al. Research progress of Ti(C, N) cements with nano modification [J].Cemented Carbides, 2005, 22(2):112-116.
【3】SALES W F, COSTA L A, SANTOS SC, et al. Performance of coated, cemented carbide, mixed-ceramic and PCBN-H tools when turning W320 steel[J].Int J Adv Manuf Technol, 2009, 41:660-669.
【4】ZHANG Xiao-bo, LIU Ning, LI Yong, et al. Mechanical properties and thermal shock resistance of nano modified Ti(C, N)-based cerements[J].Journal of the Chinese Ceramic Society, 2008, 36(4):503-509.
【5】章晓波, 刘宁, 陈焱, 等. 纳米TiN改性Ti(C, N)基金属陶瓷的组织和性能[J].中国有色金属学报, 2008, 18(7): 1280-1285.
相关信息
