Recent Progress of Standard Methods for Analysis of Metals and Alloys Adopted by ASTM in USA and by GB Standards in PRC
摘 要
对我国国家标准和美国ASTM标准中有关金属材料(包括钢铁、铝及铝合金、铜及铜合金、锌及锌合金、镁及镁合金、钛及钛合金、镍及镍基合金、锡铅焊料和铅及铅基合金)化学成分分析方法中标准方法的制、修订方面的最新进展,特别是现代测试新技术及新方法在标准分析方法中的应用现状和发展趋势作了评述,并提出了有关我国国家标准制订中的一些见解和建议(引用文献15篇)。
Abstract
A review on recent progress of formulations and revisions of standard methods for analysis of metals and alloys (in cluding iron and steel, aluminum and aluminum alloys, copper and copper alloys, zinc and zinc alloys, magnesium and magnesium alloys, titanium and titanium alloys, nickel and nickel alloys, tin lead solder, lead and lead alloys), especially the present status and trend of application of various new and modern analytical techniques and methods to the standard analytical methods was given. Original views and positive suggestions of the author for the formulation or revision of the GB standard analytical methods were also given (15 ref. cited).
中图分类号 O65
所属栏目 综述
基金项目 上海市科委科技攻关项目(11521100704)
收稿日期 2012/5/18
修改稿日期
网络出版日期
作者单位点击查看
备注马冲先(1963-),男,浙阳东阳人,教授级高级工程师,主要从事金属材料分析方法研究及标准样品研制工作。
引用该论文: MA Chong-xian. Recent Progress of Standard Methods for Analysis of Metals and Alloys Adopted by ASTM in USA and by GB Standards in PRC[J]. Physical Testing and Chemical Analysis part B:Chemical Analysis, 2012, 48(10): 1247~1256
马冲先. 中美金属材料标准分析方法的最新进展[J]. 理化检验-化学分册, 2012, 48(10): 1247~1256
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB/T 4336-2002碳素钢和中低合金钢火花源原子发射光谱分析方法(常规法) [S].
【2】GB/T 11170-2008不锈钢 多元素含量的测定 火花放电原子发射光谱法(常规法)[S].
【3】GB/T 24234-2009铸铁 多元素含量的测定 火花放电原子发射光谱法(常规法)[S].
【4】GB/T 223.79-2007钢铁 多元素含量的测定 X射线荧光光谱法(常规法)[S].
【5】GB/T 22368-2008低合金钢 多元素含量的测定 辉光放电原子发射光谱法(常规法)[S].
【6】GB/T 21834-2008中低合金钢 多元素成分分布的测定 金属原位统计分布分析法[S].
【7】ASTM E350-95(2005)e1Standard test methods for chemical analysis of carbon steel, low-alloy steel, silicon electrical steel, ingot iron, and wrought iron[S].
【8】ASTM E351-93(2006)Standard test methods for chemical analysis of cast iron-all types[S].
【9】ASTM E1085-09Standard test method for analysis of low-alloy steels by X-ray fluorescence spectrometry[S].
【10】ASTM E572-02a(2006)e2Standard test method for analysis of stainless and alloy steels by X-ray fluorescence spectrometry[S].
【11】GB/T 5121.28-2010铜及铜合金化学分析方法 第28部分:铬、铁、锰、钴、镍、锌、砷、硒、银、镉、锡、锑、碲、铅、铋量的测定 电感耦合等离子体质谱法[S].
【12】ASTM E2594-09Standard test method for analysis of nickel alloys by inductively coupled plasma atomic emission spectrometry (performance-based method) [S].
【13】ASTM E1834-11Standard test method for analysis of nickel alloys by graphite furnace atomic absorption spectrometry[S].
【14】ASTM E1835-09Standard test method for analysis of nickel alloys by flame atomic absorption spectrometry[S].
【15】ASTM E2823-11Standard test method for analysis of nickel alloys by inductively coupled plasma mass spectrometry (performance-based method) [S].
【2】GB/T 11170-2008不锈钢 多元素含量的测定 火花放电原子发射光谱法(常规法)[S].
【3】GB/T 24234-2009铸铁 多元素含量的测定 火花放电原子发射光谱法(常规法)[S].
【4】GB/T 223.79-2007钢铁 多元素含量的测定 X射线荧光光谱法(常规法)[S].
【5】GB/T 22368-2008低合金钢 多元素含量的测定 辉光放电原子发射光谱法(常规法)[S].
【6】GB/T 21834-2008中低合金钢 多元素成分分布的测定 金属原位统计分布分析法[S].
【7】ASTM E350-95(2005)e1Standard test methods for chemical analysis of carbon steel, low-alloy steel, silicon electrical steel, ingot iron, and wrought iron[S].
【8】ASTM E351-93(2006)Standard test methods for chemical analysis of cast iron-all types[S].
【9】ASTM E1085-09Standard test method for analysis of low-alloy steels by X-ray fluorescence spectrometry[S].
【10】ASTM E572-02a(2006)e2Standard test method for analysis of stainless and alloy steels by X-ray fluorescence spectrometry[S].
【11】GB/T 5121.28-2010铜及铜合金化学分析方法 第28部分:铬、铁、锰、钴、镍、锌、砷、硒、银、镉、锡、锑、碲、铅、铋量的测定 电感耦合等离子体质谱法[S].
【12】ASTM E2594-09Standard test method for analysis of nickel alloys by inductively coupled plasma atomic emission spectrometry (performance-based method) [S].
【13】ASTM E1834-11Standard test method for analysis of nickel alloys by graphite furnace atomic absorption spectrometry[S].
【14】ASTM E1835-09Standard test method for analysis of nickel alloys by flame atomic absorption spectrometry[S].
【15】ASTM E2823-11Standard test method for analysis of nickel alloys by inductively coupled plasma mass spectrometry (performance-based method) [S].
相关信息