Selection of Automatic Welding Technological Parameters of6082T6 Aluminum Alloy
摘 要
采用不同的焊接工艺参数对6082T6铝合金进行自动焊焊接,并对合格的焊接接头进行了理化检验。在此基础上分析了焊接过程中存在的主要问题,并提出了相应的解决措施,获得了满足生产需要的焊接工艺参数。
Abstract
The 6082T6aluminum alloy was welded by automatic welding with different welding technologicalparameters.Moreover,the qualified joint was tested by physical and chemical testing.On that basis,the mainissues in the welding were analyzed,and the corresponding measures were proposed,the welding technologicalparameters met the production requirements were obtained.
中图分类号 TG457.14
所属栏目 试验与研究
基金项目
收稿日期 2010/5/19
修改稿日期
网络出版日期
作者单位点击查看
备注季小辉(1984-),男,硕士研究生。
引用该论文: JI Xiao-hui,DONG Bin,YUAN Jing,WAN Jin-jin,XU Xiao-ming. Selection of Automatic Welding Technological Parameters of6082T6 Aluminum Alloy[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2011, 47(1): 15~17
季小辉,董斌,袁静,万金金,许晓明. 6082T6铝合金自动焊接工艺参数的选择[J]. 理化检验-物理分册, 2011, 47(1): 15~17
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王炎金.铝合金车体焊接工艺[M].北京:机械工业出版社,2010:34-71.
相关信息