高钢级大口径焊管残余应力的测试方法
Test Methods for Residual Stress in Large-diameter Welded Pipe of High Grade Steel
摘 要
针对X80钢大口径UOE,JCOE和SAWH(螺旋缝埋弧焊)三种焊管,研究了盲孔法、切块法和切环法在高钢级大口径焊管残余应力测试中的应用。结果表明:对于这三种管型,通过切环法估算的残余应力与盲孔法和切块法的测试值较为接近,三种方法的结果重合性较好。
残余应力
测试方法
盲孔法
切块法
切环法
测点布置
large-diameter welded pipe
residual stress
test method
blind hole method
slab method
cutting ring method
test point arrangement
Abstract
For three kinds of large-diameter welded pipe of X80 steel including UOE, JCOE and SAWH (helical submerged arc welding) pipe, applications of the blind hole method, slabmethod, cutting ring methodin residual stress testing for large-diameter welde dpipe of high grade steel were studied. The results showed that, for the three kinds of pipe, the estimate results of residual stress by cutting ring method were close to the test values by blind hole method and slab method, the results of three methods coincided better.
中图分类号 TG404
所属栏目
基金项目
收稿日期 2010/10/12
修改稿日期
网络出版日期
作者单位点击查看
备注熊庆人(1969-),女,高级工程师,博士。
引用该论文: XIONG Qing-ren,LI Xiao,XU Cong-min,LI Jian,ZHANG Wei-wei,WEI Zun-yi. Test Methods for Residual Stress in Large-diameter Welded Pipe of High Grade Steel[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2011, 47(5): 265～269
熊庆人,李霄,胥聪敏,李健,张伟卫,卫遵义. 高钢级大口径焊管残余应力的测试方法[J]. 理化检验－物理分册, 2011, 47(5): 265～269
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】罗金恒,郑茂盛,熊庆人,等.螺旋缝埋弧焊管残余应力的评价方法[J].压力容器,2008,25(3):7-14.
【2】XIONGQing-ren, FENG Yao-rong, HUO Chun-yong, et al. Themeasurement and control of residual stress in spiral sub-merged arc welded pipe[C]//Proceedings of IPC′ 02, 4th International Pipeline Conference. Calgry, Alberta, Canada: [s.n.],2002.
【3】吉玲康,颜峰,霍春勇,等.螺旋缝埋弧焊管的水压和稳压试验及残余应力[J].石油机械,2000,28(3):15-19.
【4】VLACLAV Linhart,JANA Sigmundoval, VLADIS-LAV Ochodek. Some comparisons of residual stress measurements on pressurized pipes by the holed drilling and magnetoelastic methods[J]. Electronics folyoirat, 2008(1):34-37.
【5】月兰.焊管的残余应力测试与研究[J].实验力学, 2001,16(3):305-312.
【6】LAWA M, PRASK H, LUZIN V, et al. Residual stress measurements in coil, linepipe and girth welded pipe[J].Materials Science and Engineering A, 2006, 437:60-63.
【7】颜峰,吉玲康,冯耀荣.油气输送焊管残余应力测试方法的研究[J].石油机械,1999,27(4):18-20.
【8】CB3395-1992 残余应力测量方法钻孔应变释放法[S].
【9】ASTM E837-08e1 Standard Test Method for Determining Residual Stresses by the Hole-drilling Straingage Method[S].
【10】XIONG Qing-ren, ZHAO Wen-zhen, ZHENG Mao-sheng, et al. Effects of axial and radial distortion on residual stress of HSAW pipe[C]//2009 ASME Pressure Vessels and Piping Conference. Prague:[s. n.], 2009.
【2】XIONGQing-ren, FENG Yao-rong, HUO Chun-yong, et al. Themeasurement and control of residual stress in spiral sub-merged arc welded pipe[C]//Proceedings of IPC′ 02, 4th International Pipeline Conference. Calgry, Alberta, Canada: [s.n.],2002.
【3】吉玲康,颜峰,霍春勇,等.螺旋缝埋弧焊管的水压和稳压试验及残余应力[J].石油机械,2000,28(3):15-19.
【4】VLACLAV Linhart,JANA Sigmundoval, VLADIS-LAV Ochodek. Some comparisons of residual stress measurements on pressurized pipes by the holed drilling and magnetoelastic methods[J]. Electronics folyoirat, 2008(1):34-37.
【5】月兰.焊管的残余应力测试与研究[J].实验力学, 2001,16(3):305-312.
【6】LAWA M, PRASK H, LUZIN V, et al. Residual stress measurements in coil, linepipe and girth welded pipe[J].Materials Science and Engineering A, 2006, 437:60-63.
【7】颜峰,吉玲康,冯耀荣.油气输送焊管残余应力测试方法的研究[J].石油机械,1999,27(4):18-20.
【8】CB3395-1992 残余应力测量方法钻孔应变释放法[S].
【9】ASTM E837-08e1 Standard Test Method for Determining Residual Stresses by the Hole-drilling Straingage Method[S].
【10】XIONG Qing-ren, ZHAO Wen-zhen, ZHENG Mao-sheng, et al. Effects of axial and radial distortion on residual stress of HSAW pipe[C]//2009 ASME Pressure Vessels and Piping Conference. Prague:[s. n.], 2009.
相关信息
