Uncertainty Evaluation of Brinell Hardness Test
摘 要
根据布氏硬度试验中标准硬度块、硬度计及试样等影响不确定度的因素, 提出了一种试验室布氏硬度试验测定值的不确定度评定方法, 即通过对产生不确定度的若干分量进行计算, 最后得出扩展不确定度。被测45钢锻材试样的布氏硬度试验结果为:X=(185.0±3.6) HBW5/750, k=2, 相对扩展不确定度Urel=1.9%。结果表明: 该布氏硬度试验的不确定度对试验结果的影响在可接受范围之内。
Abstract
An uncertainty evaluation method for Brinell hardness test was introduced, and those uncertainties associated with the hardness-reference block, hardness testing machine, and specimen were taken into account. In other words, the effects to the separated uncertainties were calculated to derive the expanded uncertainty. The testing results of 45 steel forging specimen were X=(185.0±3.6) HBW5/750, k=2, and the relevant deviation of hardness was 1.5%. The results show that the effect of uncertainties to the hardness test results was acceptable.
中图分类号 TG115.5+1
所属栏目 试验技术与方法
基金项目
收稿日期 2012/1/17
修改稿日期
网络出版日期
作者单位点击查看
备注黄显芝(1984-), 男, 硕士。
引用该论文: HUANG Xian-zhi,YE Zhi-fei,ZHANG Xin-hong,LI Yang. Uncertainty Evaluation of Brinell Hardness Test[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2012, 48(10): 668~671
黄显芝,叶志飞,张心红,李扬. 布氏硬度试验的不确定度评定[J]. 理化检验-物理分册, 2012, 48(10): 668~671
被引情况:
【1】杨震,王伟,吴广磊,徐婷婷,裴洪磊,范增, "提高铸铁材料布氏硬度快速测试精度的方法",理化检验-物理分册 51, 772-775(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB/T 231.1-2009金属材料 布氏硬度试验 第一部分: 试验方法[S].
【2】ISO 6506-1: 2005Metallic materials—Brinell hardness test[S].
【3】JJF 1059-1999测量不确定度评定与表示[S].
【4】JJG 150-2005金属布氏硬度计检定规程[S].
【5】韩德伟. 金属硬度检测技术手册[M]. 长沙: 中南大学出版社, 2003.
【6】GB/T 231.4-2009金属材料 布氏硬度试验 第四部分: 硬度值表[S].
【2】ISO 6506-1: 2005Metallic materials—Brinell hardness test[S].
【3】JJF 1059-1999测量不确定度评定与表示[S].
【4】JJG 150-2005金属布氏硬度计检定规程[S].
【5】韩德伟. 金属硬度检测技术手册[M]. 长沙: 中南大学出版社, 2003.
【6】GB/T 231.4-2009金属材料 布氏硬度试验 第四部分: 硬度值表[S].
相关信息