Technology Requirement and Standardization of Tubing and Casing not Specified by API in Tarim Oil Field
摘 要
通过对塔里木油田油套管在使用过程中发生的失效事故和油套管订货技术标准进行分析, 认为依据油套管使用工况确定订货技术标准, 严格订货技术标准有利于减少油套管失效事故, 统一技术标准是油田和油套管生产厂家共同的责任, 统一技术标准不仅有利于油田降低采购成本, 有利于油田管理和减少库存, 也有利于大多数生产厂家和油套管国产化。在油套管订货技术标准中, 应当对油套管的尺寸精度、材料性能、抗粘扣性能、密封性能等提出具体要求。最后介绍了塔里木油田在第三套井身结构中套管技术要求及标准化成功的案例。
Abstract
An investigation on tubing and casing failure accidents was done. It was considered that the technology standard should be in accordance with the service condition of tubing and casing, and strict technology standard is benefit to prevent from failure accidents. Unification standard not only is responsibility of both oil field and mill and is in favor of reduction buying cost, but also is advantaged to oil field manage and reduce storage and is benefit to most manufactory and develop nation industry. It was suggested that dimension precision, material performance, seal performance and so on, should be specified strictly in tubing and casing standard according to the service condition. An example was given at last that the casing standard was applied successfully to the third well structure in Tarim oil field so far.
中图分类号 TE922
所属栏目 标准化
基金项目
收稿日期 2012/3/16
修改稿日期
网络出版日期
作者单位点击查看
备注安文华(1962-),男,教授级高级工程师。
引用该论文: AN Wen-hua,TENG Xue-qing,LV Shuan-lu,ZHANG Xin-ping,YANG Cheng-xin,DING Yi,DU Tao,XU Yong-kang. Technology Requirement and Standardization of Tubing and Casing not Specified by API in Tarim Oil Field[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2013, 49(2): 103~106
安文华,滕学清,吕拴录,张新平,杨成新,丁毅,杜涛,徐永康. 塔里木油田非API油套管技术要求及标准化[J]. 理化检验-物理分册, 2013, 49(2): 103~106
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】API SPEC 5B-2008Speciflcation for threading,gaging,and threaded inspection of casing,tubing,and line pipe threads[S].
【2】API SPEC 5CT-2005Specification for casing and tubing[S].
【3】吕拴录, 刘明球, 王庭建, 等. J55平式油管粘扣原因分析[J]. 机械工程材料, 2006,30(3): 69-71.
【4】袁鹏斌, 吕拴录, 姜涛,等. 进口油管脱扣和粘扣原因分析[J]. 石油矿场机械, 2008, 37(3): 74-77.
【5】吕拴录, 骆发前, 赵盈, 等. 防硫油管粘扣原因分析及试验研究[J]. 石油矿场机械, 2009,38(8): 37-40.
【6】吕拴录, 秦宏德, 江涛, 等. 73.0 mm×5.51 mm J55平式油管断裂和弯曲原因分析[J]. 石油矿场机械, 2007, 36(8): 47-49.
【7】吕拴录, 袁鹏斌, 魏茂质,等. 73.0 mm EU J55油管短节断裂原因分析[J]. 理化检验-物理分册, 2008, 42(12): 715-718.
【8】吕拴录. φ139.7×7.72 mm J55长圆螺纹套管脱扣原因分析[J]. 钻采工艺, 2005, 28(2): 73-77.
【9】袁鹏斌, 吕拴录, 姜涛, 等. 长圆螺纹套管脱扣原因分析[J]. 石油矿场机械, 2007, 36(10): 68-72.
【10】LV Shuan-lu,HAN Yong,QIN Chang-yi,et al. Analysis of well casing connection pull over[J]. Engineering Failure Analysis,2006,13(4): 638-645.
【11】滕学清, 吕拴录, 黄世财, 等. DN2-6井套压升高原因及不锈钢完井管柱油管接头粘扣原因分析[J]. 理化检验-物理分册, 2010,46(12): 794-797.
【12】吕拴录. 套管抗内压强度试验研究[J]. 石油矿场机械, 2001, 30(增刊): 51-55.
【13】吕拴录, 骆发前, 陈飞, 等. 牙哈7X-1井套管压力升高原因分析[J]. 钻采工艺, 2008, 31(1): 129-132.
【14】LV Shuan-lu,LI Yuan-bin,WANG Zheng-biao,et al. Cause analysis of casing internal pressure increase in one well[C]//Proceedings of the 3rd World Conference on Safety of Oil and Gas Industry. Beijing:[s.n.],2010:27-28.
【15】吕拴录, 骆发前, 周杰, 等. API油套管粘扣原因分析及预防[J]. 钻采工艺, 2010,33(6): 80-83.
【16】吕拴录, 袁鹏斌, 张伟文, 等. 某井N80钢级套管脱扣和粘扣原因分析[J]. 钢管, 2010, 39(5): 57-61.
【17】吕拴录, 张锋, 吴富强, 等. 进口P110EU 油管粘扣原因分析及试验研究[J]. 石油矿场机械, 2010,39(6): 55-57.
【18】盛树彬,吕拴录,李元斌,等. DN2-12井不锈钢油管柱酸化作业后粘扣及腐蚀原因分析[J]. 理化检验-物理分册,2010,46(8): 529-532.
【19】LV Shuan-lu,LI Zhi-hou,HAN Yong,et al. High dogleg severity, wear ruptures casing string[J]. Oil & Gas, 2004, 98(49): 74-80.
【20】吕拴录, 李鹤林. V150套管接箍破裂原因分析[J]. 理化检验-物理分册,2005, 41(增刊): 285-290.
【21】吕拴录, 康延军, 刘胜, 等. 井口套管裂纹原因分析[J]. 石油钻探技术, 2009, 37(5): 85-88.
【22】吕拴录,骆发前,康延军. 273.05 mm套管裂纹原因分析[J]. 钢管, 2010(增刊): 22-25.
【23】API RP 5C5-2003 (R2010)Recommended practice for evaluation procedure for casing and tubing connection[S].
【2】API SPEC 5CT-2005Specification for casing and tubing[S].
【3】吕拴录, 刘明球, 王庭建, 等. J55平式油管粘扣原因分析[J]. 机械工程材料, 2006,30(3): 69-71.
【4】袁鹏斌, 吕拴录, 姜涛,等. 进口油管脱扣和粘扣原因分析[J]. 石油矿场机械, 2008, 37(3): 74-77.
【5】吕拴录, 骆发前, 赵盈, 等. 防硫油管粘扣原因分析及试验研究[J]. 石油矿场机械, 2009,38(8): 37-40.
【6】吕拴录, 秦宏德, 江涛, 等. 73.0 mm×5.51 mm J55平式油管断裂和弯曲原因分析[J]. 石油矿场机械, 2007, 36(8): 47-49.
【7】吕拴录, 袁鹏斌, 魏茂质,等. 73.0 mm EU J55油管短节断裂原因分析[J]. 理化检验-物理分册, 2008, 42(12): 715-718.
【8】吕拴录. φ139.7×7.72 mm J55长圆螺纹套管脱扣原因分析[J]. 钻采工艺, 2005, 28(2): 73-77.
【9】袁鹏斌, 吕拴录, 姜涛, 等. 长圆螺纹套管脱扣原因分析[J]. 石油矿场机械, 2007, 36(10): 68-72.
【10】LV Shuan-lu,HAN Yong,QIN Chang-yi,et al. Analysis of well casing connection pull over[J]. Engineering Failure Analysis,2006,13(4): 638-645.
【11】滕学清, 吕拴录, 黄世财, 等. DN2-6井套压升高原因及不锈钢完井管柱油管接头粘扣原因分析[J]. 理化检验-物理分册, 2010,46(12): 794-797.
【12】吕拴录. 套管抗内压强度试验研究[J]. 石油矿场机械, 2001, 30(增刊): 51-55.
【13】吕拴录, 骆发前, 陈飞, 等. 牙哈7X-1井套管压力升高原因分析[J]. 钻采工艺, 2008, 31(1): 129-132.
【14】LV Shuan-lu,LI Yuan-bin,WANG Zheng-biao,et al. Cause analysis of casing internal pressure increase in one well[C]//Proceedings of the 3rd World Conference on Safety of Oil and Gas Industry. Beijing:[s.n.],2010:27-28.
【15】吕拴录, 骆发前, 周杰, 等. API油套管粘扣原因分析及预防[J]. 钻采工艺, 2010,33(6): 80-83.
【16】吕拴录, 袁鹏斌, 张伟文, 等. 某井N80钢级套管脱扣和粘扣原因分析[J]. 钢管, 2010, 39(5): 57-61.
【17】吕拴录, 张锋, 吴富强, 等. 进口P110EU 油管粘扣原因分析及试验研究[J]. 石油矿场机械, 2010,39(6): 55-57.
【18】盛树彬,吕拴录,李元斌,等. DN2-12井不锈钢油管柱酸化作业后粘扣及腐蚀原因分析[J]. 理化检验-物理分册,2010,46(8): 529-532.
【19】LV Shuan-lu,LI Zhi-hou,HAN Yong,et al. High dogleg severity, wear ruptures casing string[J]. Oil & Gas, 2004, 98(49): 74-80.
【20】吕拴录, 李鹤林. V150套管接箍破裂原因分析[J]. 理化检验-物理分册,2005, 41(增刊): 285-290.
【21】吕拴录, 康延军, 刘胜, 等. 井口套管裂纹原因分析[J]. 石油钻探技术, 2009, 37(5): 85-88.
【22】吕拴录,骆发前,康延军. 273.05 mm套管裂纹原因分析[J]. 钢管, 2010(增刊): 22-25.
【23】API RP 5C5-2003 (R2010)Recommended practice for evaluation procedure for casing and tubing connection[S].
相关信息