The Influence of Mechanical Joint on UT Reflected Signal under Different Pressure
摘 要
过盈配合是机械系统中常见的结构,但针对实际产品,过盈量由于加工精度问题是否能满足要求则无法检测。通过研究不同压力下机械结合面对超声波反射信号与压力的关系,得出使用超声波方法检测过盈配合结合质量是可行的方法。
Abstract
Interference fit is common structure in mechanical system, but whether the magnitude of interference satisfies the requirement for a product is not clear. This paper researched on the relationship between mechanical joint and UTs reflected signal under different pressure, and concluded that the test method of interference fit bonding quality by using ultrasonic inspection method was feasible.
中图分类号 TG115.28
所属栏目 试验研究
基金项目 宁波市自然科学基金资助项目(2009A610104)
收稿日期 2010/5/28
修改稿日期
网络出版日期
作者单位点击查看
备注张维国(1972-),男,高工,从事无损检测工作,主要工作内容是CT,UT,RT专业的日常检测和研究工作。
引用该论文: ZHANG Wei-Guo,ZHANG Li-Jun,QIAO Ri-Dong,WANG Xiu-Ling,TANG Sheng-Ming. The Influence of Mechanical Joint on UT Reflected Signal under Different Pressure[J]. Nondestructive Testing, 2011, 33(5): 51~52
张维国,张利君,乔日东,王秀玲,唐盛明. 不同压力下机械结合面对超声波反射信号的影响[J]. 无损检测, 2011, 33(5): 51~52
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】全国锅炉压力容器无损检测人员资格鉴定考核委员会.超声波探伤[M].北京:劳动人事出版社,1989.
【2】侯书林,朱海.机械制造基础[M].北京:中国林业出版社,2006.
【2】侯书林,朱海.机械制造基础[M].北京:中国林业出版社,2006.
相关信息