搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
利用声发射技术检测储罐的腐蚀损伤状态
          
Acoustic Emission Testing Technology for the Corrosion Destruction Condition of Vessels

摘    要
研究了采用声发射技术检测大型氧化剂储罐腐蚀损伤状态的可行性。根据液体火箭氧化剂储罐主要的结构材料5A03铝合金在实际使用中的腐蚀机理,选取不同浓度的硝酸作为腐蚀介质,建立5A03铝合金腐蚀的试验方案,利用声发射技术对腐蚀过程进行监测,获得了各浓度水平下的声发射信号。试验结果表明,声发射信号撞击数的多少能够反映合金不同的腐蚀损伤程度,不同浓度硝酸中5A03铝合金腐蚀声发射信号的上升时间、持续时间、振铃计数、能量等特征参数的分布具有较大差异,可通过90%的分布区间加以区分。利用所建立的BP神经网络能够以很高的正确率对5A03铝合金储罐腐蚀损伤程度进行模式识别。
标    签 铝合金   声发射检测   腐蚀   特征分析   神经网络   Aluminum alloy   Acoustic emission testing   Corrosion   Characteristic analysis   Artificial neural network  
 
Abstract
The study is made to prove the feasibility of using the acoustic emission technology to detect the corrosion destruction condition of the liquid rocket oxidant vessels, whose main structure material is 5A03 aluminum alloy. The simulative test project using different concentrations of nitric acid to corrode 5A03 alloy is made according to the corrosion mechanism of the oxidant vessels in use. The corrosion process of 5A03 aluminium alloy is monitored by the acoustic emission technology for the first time in this article. The results show that the hits number can reflect the corrosion destruction condition of the alloy, and the distribution of the characteristic parameters, such as rise time, duration, ring-down counts and energy, is different obviously, and can be differed by 90% distribution interval. At last, the BP artificial neural network is build up to judge the corrosion damage degree with high accuracy, and the acoustic emission technology is proved feasible and predominant to inspect the corrosion condition of the oxidant vessel.

中图分类号 TG115.28

 
  中国光学期刊网论文下载说明


所属栏目 试验研究

基金项目

收稿日期 2011/1/28

修改稿日期

网络出版日期

作者单位点击查看

备注钟建强(1979-),男,讲师,硕士。

引用该论文: ZHONG Jian-Qiang,LIU Ying,YANG Juan,WANG Han-Gong. Acoustic Emission Testing Technology for the Corrosion Destruction Condition of Vessels[J]. Nondestructive Testing, 2011, 33(11): 24~28
钟建强,柳颖,杨娟,王汉功. 利用声发射技术检测储罐的腐蚀损伤状态[J]. 无损检测, 2011, 33(11): 24~28


被引情况:


【1】邱枫,戴光,张颖,赵永涛,张明宇, "储罐底板腐蚀声发射源的识别定位",无损检测 37, 14-19(2015)

【2】李力,李骥, "基于PCA和SVM的铬层裂纹声发射识别方法",无损检测 36, 1-4(2014)



论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
相关信息
   标题 相关频次
 铝合金腐蚀声发射信号特性研究
 8
 2A12铝合金当量加速腐蚀试验
 4
 大气气溶胶对K8E飞机铝合金零件的腐蚀作用
 4
 大型立式储罐综合检测技术
 4
 等离子电解氧化脉冲电压对铝合金陶瓷层结构的影响
 4
 蜂窝夹层复合材料的压缩损伤声发射特征
 4
 高耐蚀性铬酸阳极氧化工艺研究
 4
 基于元胞自动机法的铝合金腐蚀行为模拟
 4
 近海含SO2环境中高压隔离开关铝合金部件的组织及腐蚀特征
 4
 铝合金表面等离子喷涂镍基涂层的耐磨损腐蚀行为
 4
 危险化学品储罐罐底在线声发射检测与安全性评估
 4
 微弧氧化铝合金在海水中的腐蚀行为
 4
 沿海工业环境下6A02铝合金接线板的腐蚀行为
 4
 荧光分析法检测Cl-溶液中AA6061铝合金的腐蚀
 4
 7A04和2A12铝合金在吐鲁番干热大气环境中的腐蚀行为
 3
 9S75铝合金的电化学腐蚀行为及阳极氧化工艺
 3
 Al-34%Mg-6%Zn合金储热性能和液态腐蚀性实验研究
 3
 BP神经网络预测碳钢在油田水介质中的腐蚀速率
 3
 飞机疲劳试验裂纹声发射信号的人工神经网络模式识别
 3
 共晶铝-镁-锌储能合金的热稳定性和液态腐蚀性
 3
 基于BP神经网络的混流式水轮机裂纹声发射源定位方法
 3
 铝合金锭光电光谱分析的误差
 3
 攀钢发电厂除氧器腐蚀及对策
 3
 声发射法在复合材料飞轮试件损伤检测中的应用
 3
 声发射检测在常压储罐基于风险的检验中的应用
 3
 Φ219mm×10.5mm弯管环焊缝穿孔失效分析
 2
 1 000 MPa级超高强度热镀锌钢板耐腐蚀性能
 2
 1000m3丙烷球罐声发射检测
 2
 1050A铝合金模拟海洋大气环境腐蚀行为的中性盐雾试验
 2
 1050A铝合金在模拟海洋大气环境中周浸腐蚀行为
 2