Creeping Wave InSitu Inspection for the Rabbet of Aeroengine Blade
摘 要
文章尝试利用爬波特性解决飞机叶片榫槽原位检测难题。分析了飞机叶片榫槽原位爬波检测的原理,介绍了仪器、探头的选用原则,设计了模拟叶片试块,确定了检测灵敏度,并对原位检测方法作了说明。通过对检测结果的分析表明,采用小尺寸高频双晶爬波探头可以有效地对发动机叶片榫槽裂纹进行原位检测,而且检测方便快捷,灵敏度高,信号容易辨别,从而为爬波检测技术开辟了新的应用领域。
Abstract
Attempt was made with the characteristics of creeping wave, to solve the difficult problem that the rabbet crack of areoengine blade could not be inspected on the original position. The insitu creeping wave testing principle was analyzed, and the detector and probe selecting ways were introduced. In order to determine the testing sensitivity, a kind of simulative specimens was designed. At last, the insitu inspection method was explained. The experimental results showed that the technique was effective to find out the cracks in the rabbet of engine blade with small size, high frequency, doublecrystal creeping wave probe. It is convenient, fast, sensitive and easy to be distinguished. So a new application field was opened up for the creeping wave testing technique.
中图分类号 TG115.28
所属栏目 试验研究
基金项目
收稿日期 2011/12/27
修改稿日期
网络出版日期
作者单位点击查看
备注谢小荣(1973-),男,讲师,主要从事飞机损伤无损检测教学和新技术应用研究工作。
引用该论文: XIE XiaoRong,JIANG Tao,YANG XiaoLin. Creeping Wave InSitu Inspection for the Rabbet of Aeroengine Blade[J]. Nondestructive Testing, 2012, 34(1): 31~33
谢小荣,江涛,杨小林. 飞机发动机叶片榫槽爬波原位检测[J]. 无损检测, 2012, 34(1): 31~33
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】樊利国,荆洪阳.爬波检测及其应用[J].无损检测,2005,27(4):212-216.
【2】江山,霍立兴.表面及近表面裂纹的爬波无损检测[J].无损探伤,2005,29(3):7-11.
【3】莫宁.超声爬波试验在运行瓷件探伤中的应用[J].山西电力技术,2000,92(3):21-22.
【4】徐连勇,荆洪阳.在役含缺陷棒形悬式瓷绝缘子的非破坏性可靠性评定[J].天津大学学报,2006,39(10):1258-1263.
【5】魏东斌,刘鸣娟.镍基合金螺栓的超声波检测[J].热处理技术与装备,2006,27(4):56-58.
【2】江山,霍立兴.表面及近表面裂纹的爬波无损检测[J].无损探伤,2005,29(3):7-11.
【3】莫宁.超声爬波试验在运行瓷件探伤中的应用[J].山西电力技术,2000,92(3):21-22.
【4】徐连勇,荆洪阳.在役含缺陷棒形悬式瓷绝缘子的非破坏性可靠性评定[J].天津大学学报,2006,39(10):1258-1263.
【5】魏东斌,刘鸣娟.镍基合金螺栓的超声波检测[J].热处理技术与装备,2006,27(4):56-58.
相关信息